[meta-freescale] ][PATCH 31/31] update ls1021atwr machine conf

[Luo Zhenhua]

Bob, 

Thanks for your comments. 

> -----Original Message-----
> From: Bob Cochran [mailto:yocto at mindchasers.com]
> Sent: Saturday, August 15, 2015 2:04 AM
> To: Luo Zhenhua-B19537 <zhenhua.luo at freescale.com>; meta-
> freescale at yoctoproject.org
> Subject: Re: [meta-freescale] ][PATCH 31/31] update ls1021atwr machine conf
> 
> On 08/12/2015 10:42 AM, Zhenhua Luo wrote:
> > * update the DESCRIPTION to provide more details
> > * add sdcard, lpuart and qspi in UBOOT_CONFIG
> > * add KERNEL_DEFCONFIG
> > * remove duplicated variables which are in qoriq-arm.inc
> >
> > Signed-off-by: Zhenhua Luo <zhenhua.luo at freescale.com>
> > ---
> >   conf/machine/ls1021atwr.conf | 11 +++++------
> >   1 file changed, 5 insertions(+), 6 deletions(-)
> >
> > diff --git a/conf/machine/ls1021atwr.conf
> > b/conf/machine/ls1021atwr.conf index 4478e95..a01429c 100644
> > --- a/conf/machine/ls1021atwr.conf
> > +++ b/conf/machine/ls1021atwr.conf
> > @@ -1,7 +1,8 @@
> >   #@TYPE: Machine
> >   #@NAME: Freescale LS1021ATWR board
> >   #@SOC: ls102xa
> > -#@DESCRIPTION: Machine configuration for running LS1021ATWR in 32-bit
> > mode
> > +#@DESCRIPTION: Machine configuration for Freescale QorIQ LS1 Tower
> System
> > +#              Module with ARM Cortex-A7 core
> >   #@MAINTAINER: Zhenhua Luo <zhenhua.luo at freescale.com>
> 
> 
> Hi Zhenhua,
> 
> Are both 1.0 and 2.0 silicon supported?  Are any revisions of the Tower board
> not supported?  Can we please add this information to this conf file?
[Luo Zhenhua-B19537] Only rev1.0 is supported by current code, I will submit a patch to add the information. 


Best Regards,

Zhenhua

> Bob
> 
> 
> 
> >
> >   require conf/machine/include/qoriq-arm.inc
> > @@ -9,7 +10,7 @@ require conf/machine/include/tune-cortexa7.inc
> >
> >   SOC_FAMILY = "ls102xa"
> >
> > -UBOOT_CONFIG ??= "nor"
> > +UBOOT_CONFIG ??= "nor sdcard lpuart qspi"
> >   UBOOT_CONFIG[nor] = "ls1021atwr_nor_config"
> >   UBOOT_CONFIG[sdcard] = "ls1021atwr_sdcard_config,sdcard"
> >   UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config"
> > @@ -19,8 +20,6 @@ UBOOT_CONFIG[secure-boot] =
> "ls1021atwr_nor_SECURE_BOOT_config"
> >   QE_UCODE="iram_Type_A_LS1021a_r1.0.bin"
> >
> >   KERNEL_DEVICETREE ?= "ls1021a-twr.dtb"
> > +KERNEL_DEFCONFIG ?= "${S}/arch/arm/configs/ls1021a_defconfig"
> >
> > -SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyS1 115200;ttyEHV0
> 115200;ttyLP0 115200;ttyAMA0"
> > -SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
> > -USE_VT ?= "0"
> > -
> > +EXTRA_IMAGEDEPENDS += "rcw qe-ucode"
> >