[meta-freescale] MFGtool error reg
Sachu Sanal (NeSTIT)
sachu.sanal at nestgroup.net
Tue Apr 21 02:04:07 PDT 2015
Dear all,
I try to flash linux OS image by using MFG tool and try to boot from
emmc.
Board is mx6qsabresd
But I get error like this
DLL version: 2.3.3
Tuesday, April 21, 2015 14:14:23 Start new logging
ModuleID[2] LevelID[10]: CMyExceptionHandler thread is running
ModuleID[2] LevelID[1]: new MxHidDeviceClass
ModuleID[2] LevelID[10]: Device Manager thread is running
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() -
DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_0054#6&27177e6b&0&6#{a5dcbf10-65
30-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() -
end
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() -
DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_0054#6&27177e6b&0&6#{a5dcbf10-65
30-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]:
DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size:
0
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() -
DeviceListType_New--index: 0
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() -
DeviceListType_New--devPath:
\\?\hid#vid_0461&pid_4e22#7&19a6fc1e&0&0000#{4d1e55b2-f16f-11cf-88cb-001
111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() -
DeviceListType_New--index: 1
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() -
DeviceListType_New--devPath:
\\?\hid#vid_15a2&pid_0054#7&65f53e&0&0000#{4d1e55b2-f16f-11cf-88cb-00111
1000030}
ModuleID[2] LevelID[10]: new MxHidDevice[00947880]
ModuleID[2] LevelID[10]:
DeviceClass::FindDeviceByUsbPath--DeviceListType_New, devInstPathToFind:
USB\VID_15A2&PID_0054\6&27177E6B&0&6, _deviceInstanceID:
USB\VID_15A2&PID_0054\6&27177E6B&0&6
ModuleID[2] LevelID[10]:
DeviceClass::FindDeviceByUsbPath--DeviceListType_New, Find the device,
Port: 6
ModuleID[2] LevelID[10]: DeviceClass::AddUsbDevice() successful
USB#VID_15A2&PID_0054#6&27177E6B&0&6#{A5DCBF10-6530-11D2-901F-00C04FB951
ED} add to current list, retrycount: 0
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() -
DEVICE_ARRIVAL_EVT,[MxHidDeviceClass] vid_15a2&pid_0054, Hub:3-Port:6
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() -
DEVICE_ARRIVAL_EVT, Notify
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume
Arrive/Remove or Device Arrive/Remove
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify,
m_p_usb_port is not NULL, so only refresh
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify,
Volume/Device Arrive
ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceArriveEvent.
ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device arrive1
ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to
state 0
ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is
E:\Sachu\sachu\mfgtools\Profiles\Linux\OS Firmware\firmware\u-boot.imx
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is
E:\Sachu\sachu\mfgtools\Profiles\Linux\OS Firmware\firmware\uImage,
address is 0x12000000
ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute
successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is
E:\Sachu\sachu\mfgtools\Profiles\Linux\OS
Firmware\firmware\fsl-image-mfgtool-initramfs-imx6qsabresd.cpio.gz.u-boo
t, address is 0x12C00000
ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute
successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is
E:\Sachu\sachu\mfgtools\Profiles\Linux\OS
Firmware\firmware\uImage-mfgtool--imx6q-sabresd-dtb, address is
0x18000000
ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute
successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Jump[WndIndex:0]
ModuleID[2] LevelID[10]: *********MxHidDevice[00947880] Jump to
Ramkernel successfully!**********
ModuleID[2] LevelID[10]: CmdOperation[0], current state command has been
finished and the last command is successful, so
SetEvent(hDevCanDeleteEvent)
ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to
state 0
ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is
E:\Sachu\sachu\mfgtools\Profiles\Linux\OS Firmware\firmware\u-boot.imx
I hereby attach my ucl script file and configuration file.
If anyone know means please help me to solve this error.
Regards
Sachu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150421/e892770c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ucl2.xml
Type: text/xml
Size: 6121 bytes
Desc: ucl2.xml
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150421/e892770c/attachment.xml>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cfg.ini
Type: application/octet-stream
Size: 170 bytes
Desc: cfg.ini
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150421/e892770c/attachment.obj>
More information about the meta-freescale
mailing list