[meta-freescale] [meta-fsl-arm][PATCH v2] u-boot-fslc: Update to 53cd36b revision

[Daiane Angolini]

On Wed, Sep 17, 2014 at 4:54 PM, Otavio Salvador
<otavio at ossystems.com.br> wrote:
>
>
> On Mon, Sep 15, 2014 at 4:50 PM, Otavio Salvador <otavio at ossystems.com.br>
> wrote:
>>
>> On Mon, Sep 15, 2014 at 4:49 PM, Otavio Salvador
>> <otavio at ossystems.com.br> wrote:
>> > This updates the 2014.07-based branch with more backports from the
>> > 2014.10 upcoming release. The following changes are included:
>> >
>> > 53cd36b imx: mx6slevk: Change to use generic board
>> > 987efad imx: mx6q/dlarm2: Change to use generic board
>> > 0207052 README.imximage: Fix the maximum DCD size
>> > 13e94fe imx: Fix build of mx6sxsabresd
>> > 318d1cd mx6sxsabresd: Add PCI support
>> > 919802d pcie_imx: Add mx6solox support
>> > 847d6ce mx6: imx-regs: Provide a structure for GPC registers
>> > f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts
>> > f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env
>> > settings to be filesystem independent
>> > e45540b arm: vf610: lpuart: disable FIFO on initializaton
>> > 11571b6 arm: vf610: lpuart: fix status register handling
>> > 09e81f4 mx6: Fix ECSPI typo in soc_boot_modes
>> > b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot
>> > 228135e iMX6: Disable the L2 before chaning the PL310 latency
>> > 45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6
>> > 9f3f181 pci: add support for board_pci_fixup_dev function
>> > 4ecf3e6 arm: mx6: add get_cpu_type()
>> > b6faaf1 arm: mx6: ddr: fix cs0_end calculation
>> > 07917e7 arm: mx6: ddr: configure MMDC for slow_pd
>> > 66b2f14 arm: mx6: ddr: do not write into reserved bit
>> > b3f847e arm: mx6: ddr: cleanup
>> > eba02a9 i2c: imx: add macros to setup pads for multiple SoC types
>> > e50e740 sata: dwc_ahsata: implement sata_port_status
>> > a45361d compulab: eeprom: add support for defining eeprom i2c bus
>> > 8f82ddd mx6: add clock enabling functions
>> > 5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
>> > d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox
>> > fca8b5a usb: ci_udc: implement dfu_usb_get_reset
>> > 7baddea arm: Add missing .vectors section to linker scripts
>> > 324df11 arm: vf610: add NFC clock support
>> > 10c68b2 arm: vf610: add NFC pin mux
>> > 9bba571 ARM: Fix overflow in MMU setup
>> > 7be9add api: fix build without CMD_NET support
>> > 8a9e527 e1000: add i210 support
>> > dcd2c8c e1000: Implement dcache support
>> >
>> > Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>> > ---
>> > Changes since v1:
>> > - Update to a newer revision to fix build failure on mx6sxsabresd board.
>>
>> I am intending to merge this to master soon but I were expecting
>> maintainers to Acked-by it after doing the tests in their boards.
>>
>> Can this be done?
>
>
> imx6qsabresd is fine.

I tested
imx6slevk
imx6sxsabresd

and they are fine

Sorry for my delay.

Daiane
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>