[meta-freescale] [meta-fsl-arm][PATCH v2] u-boot-fslc: Update to 53cd36b revision

[Otavio Salvador]

On Mon, Sep 15, 2014 at 4:49 PM, Otavio Salvador
<otavio at ossystems.com.br> wrote:
> This updates the 2014.07-based branch with more backports from the
> 2014.10 upcoming release. The following changes are included:
>
> 53cd36b imx: mx6slevk: Change to use generic board
> 987efad imx: mx6q/dlarm2: Change to use generic board
> 0207052 README.imximage: Fix the maximum DCD size
> 13e94fe imx: Fix build of mx6sxsabresd
> 318d1cd mx6sxsabresd: Add PCI support
> 919802d pcie_imx: Add mx6solox support
> 847d6ce mx6: imx-regs: Provide a structure for GPC registers
> f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts
> f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
> e45540b arm: vf610: lpuart: disable FIFO on initializaton
> 11571b6 arm: vf610: lpuart: fix status register handling
> 09e81f4 mx6: Fix ECSPI typo in soc_boot_modes
> b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot
> 228135e iMX6: Disable the L2 before chaning the PL310 latency
> 45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6
> 9f3f181 pci: add support for board_pci_fixup_dev function
> 4ecf3e6 arm: mx6: add get_cpu_type()
> b6faaf1 arm: mx6: ddr: fix cs0_end calculation
> 07917e7 arm: mx6: ddr: configure MMDC for slow_pd
> 66b2f14 arm: mx6: ddr: do not write into reserved bit
> b3f847e arm: mx6: ddr: cleanup
> eba02a9 i2c: imx: add macros to setup pads for multiple SoC types
> e50e740 sata: dwc_ahsata: implement sata_port_status
> a45361d compulab: eeprom: add support for defining eeprom i2c bus
> 8f82ddd mx6: add clock enabling functions
> 5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
> d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox
> fca8b5a usb: ci_udc: implement dfu_usb_get_reset
> 7baddea arm: Add missing .vectors section to linker scripts
> 324df11 arm: vf610: add NFC clock support
> 10c68b2 arm: vf610: add NFC pin mux
> 9bba571 ARM: Fix overflow in MMU setup
> 7be9add api: fix build without CMD_NET support
> 8a9e527 e1000: add i210 support
> dcd2c8c e1000: Implement dcache support
>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---
> Changes since v1:
> - Update to a newer revision to fix build failure on mx6sxsabresd board.

I am intending to merge this to master soon but I were expecting
maintainers to Acked-by it after doing the tests in their boards.

Can this be done?

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750