[meta-freescale] Updates to meta-fsl-arm-extra (daisy) in 2014-09-15
Otavio Salvador
otavio at ossystems.com.br
Mon Sep 15 07:11:59 PDT 2014
Hello,
I pushed following updates:
commit eeeddcd220df50933d658b27fde7b1b245a0c41f (HEAD, fslc/daisy-next, fslc/daisy, for-daisy)
Author: Eric Nelson <eric.nelson at boundarydevices.com>
Date: Sun Sep 14 11:45:16 2014 -0700
nitrogen6x: Add support for Nitrogen6_Max board
The Nitrogen6_Max board differs from Nitrogen6x only in its'
device-tree and U-Boot configuration.
Add device-tree to the Nitrogen6x image build, along with the
SABRE Lite and Nitrogen6x and document U-Boot build.
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 211be2df8b0e71124b590eb4d1c7b755d798e0c9
Author: Eric Nelson <eric.nelson at boundarydevices.com>
Date: Sun Sep 14 11:27:54 2014 -0700
linux-boundary (3.10.17): Bump SRCREV to 50c5697b
Updates in this release include:
- rebase on Freescale 3.10.17_1.0.1_ga release
- support for new (custom) boards
- fixes for production version of Nitrogen6 Max board
- fixes to allow shutdown/restart of WL12xx Wi-Fi
- added support for adv7180 NTSC video input driver
- added support for Gennum GS2971 SDI receiver
- added Ilitek 210x touch screen driver
- update Focaltech ft5x06 touch screen to support 12 touches
- update flexcan driver to allow use with only a standby GPIO
- add support for "disable_giga" parameter for FEC Gb ethernet driver
- add support for SC16IS7XX I2C multi-port serial controller
- add support for "TRULY-1U" display
- add support for Wolfson WM5102 audio codec
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 3860baa578169d2f2c46dd78bdd50c5dc5059c5f
Author: Eric Nelson <eric.nelson at boundarydevices.com>
Date: Sat Sep 13 20:54:12 2014 -0700
u-boot-boundary: update to 4dfca8881
Update to latest commit on Boundary Devices U-Boot 2014.04 tree.
Notable updates include:
support for a number of new boards, including Nitrogen6 Max
fixes for boot scripts for Solo and Dual-Lite processors
fixes to support the use of RAM disks
additional LCD panels:
Ampire 1024x600 (Ilitek touch)
WVGA LVDS
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 6d2cf93d4bc459acd185fd1fe9050b73afa81962
Author: Carlos Rafael Giani <dv at pseudoterminal.org>
Date: Thu Sep 4 11:41:58 2014 +0200
linux-cubox-i: upgrade to 3.14.14 version
This is the new SolidRun supported kernel for the HummingBoard and
CuBox-i devices. It is based on the Linaro 3.14 kernel releases.
Some of the changes are:
* devicetree files are used now
* zImage is used instead of uImage
* large amounts of memory leak and stability fixes
* increased FEC ethernet performance, higher than the Freescale rated
470 Mbps
* SDHC patchset for better UHS-I support
* residue support for SDMA with FSL's custom firmware integrated to work
with HDMI and optical SPDIF
* higher DMA and GPU efficiency in general
* the vast array of improvements of a 3.14.14 kernel over a 3.0.35 one
Change-Id: I8f5292b3c2951e7fc48dd20e556da1beba092ed5
Signed-off-by: Carlos Rafael Giani <dv at pseudoterminal.org>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 3c2a27922ce55753d4a0905f640b7c372e544313
Author: Christoph Settgast <christoph.settgast at methodpark.de>
Date: Wed Aug 27 12:19:03 2014 +0200
linux-boundary (3.10.17): update to 62ef71f
This includes the following changes, the defconfig
changes are reflected in the yocto defconfigs to
keep things in sync.
Eric Nelson (39):
nit6xlite_defconfig: add LEDS_GPIO
sabrelite: configure ethernet PHY nRST
nitrogen6x: configure ethernet PHY nRST
nitrogen6_mtp: configure ethernet PHY nRST
nitrogen6_max: configure ethernet PHY nRST
nit6xlite: configure ethernet PHY nRST
nit6xlite: default to multi-touch input for eGalax, ft5x06
nitrogen6x: default to multi-touch input for eGalax, ft5x06
nitrogen6x_ub: default to multi-touch input for eGalax, ft5x06
ft5x06: free GPIO in _remove
ft5x06: add support for ABS_MT_TRACKING_ID
ft5x06: set MAX_TOUCHES to 12
ft5x06: respect/return tracking id from controller
net: fec: iMX6 FEC does not support half-duplex gigabit
nit*_defconfig: add CONFIG_USB_FUNCTIONFS=m
nit*_defconfig: add CONFIG_USB_SERIAL_GENERIC
nit6xlite: add ili210x touch controller
nitrogen6x: add ili210x touch controller
sabrelite: add ili210x touch controller
nitrogen6_max: add ili210x touch controller
nit6xlite_defconfig: add ILI210X touch screen
nitrogen6x_defconfig: add ILI210X touch screen
ili210x: Allow use with Device Tree
nitrogen6_max: enable FEC ethernet
nitrogen6_max: swap NANDF_CS0/1 (GP6:11/14) for SD3 voltage select, WL IRQ
nitrogen6_max: define ENET_TXD1 as GPIO1:29 for amplifier mute
flexcan: allow use with transceivers that only have standby pin
nitrogen6x: SDIO is 1.8V-only, add flag in DTS
sdhci: Allow platform_set_power callback
sdhci-imx: Add power-gpio support
nitrogen6x: use power-gpio instead of vqmmc-supply to control WL_EN pin
nitrogen6_max: use power-gpio instead of vqmmc-supply to control WL_EN pin
nitrogen6_max: configure voltage-select pin
nit6xlite: flag 1.8v quirk for vqmmc on sdhc2 (WiFi interface)
DT:imx6qdl: Pad SD2_DAT3 should have pull-down
nitrogen6x_defconfig: include LEDS_PWM, SPI_SPIDEV
Add imx6q-sabrelite-nolcd device tree
fec: Add disable_giga parameter to force 10/100 operation
Revert "DT:imx6qdl: Pad SD2_DAT3 should have pull-down"
Ranjani Vaidyanathan (1):
ENGR00318392 ARM:imx6x: Save/restore SCU and some CP15 registers across suspend/resume
Signed-off-by: Christoph Settgast <christoph.settgast at methodpark.de>
Reviewed-by: Eric Nelson <eric.nelson at boundarydevices.com>
Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Regards,
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list