[meta-freescale] [meta-fsl-arm][PATCH v3 07/13] imx6slevk.conf: Add the imx6slevk-pf200 device tree

[Lauren Post]

Add support for pfuze200 on imx6slevk

Move pmic device node from imx6sl-evk.dtsi to upper-level, and add
another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile
only works in ldo-enable mode if using pfuze200, since 'SW1C' switch
regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
to share the same switch regulator

Signed-off-by: Lauren Post <lauren.post at freescale.com>
---
 conf/machine/imx6slevk.conf |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
index cffbd0b..533f85a 100644
--- a/conf/machine/imx6slevk.conf
+++ b/conf/machine/imx6slevk.conf
@@ -9,7 +9,8 @@ include conf/machine/include/tune-cortexa9.inc
 
 SOC_FAMILY = "mx6:mx6sl"
 
-KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb"
+KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb \
+                     imx6sl-evk-pf200.dtb"
 
 UBOOT_CONFIG ??= "sd"
 UBOOT_CONFIG[sd] = "mx6slevk_config,sdcard"
-- 
1.7.9.5