[meta-freescale] [meta-fsl-demos][PATCH] qt-in-use: use autotools-brokensep

[alex.gonzalez at digi.com]

From: Alex Gonzalez <alex.gonzalez at digi.com>

Building qt-in-use-image on a wandboard-quad, the qt-in-industrial-embedded-smarthome recipe fails with the following error:

Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_copy_aclocals
| DEBUG: Python function autotools_copy_aclocals finished
| DEBUG: Executing shell function do_configure
| NOTE: using qmake spec in /opt/yocto/fsl-community-bsp/wandboard-quad/tmp/sysroots/wandboard-quad/usr/share/qt4/mkspecs/linux-gnueabi-oe-g++, using profile
s ''
| /opt/yocto/fsl-community-bsp/wandboard-quad/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/qt-in-industrial-embedded-smarthome/0.0+gitrAUTOINC+4b10cbfd32-
r3/build
| ls: cannot access *.pro: No such file or directory
| WARNING: /opt/yocto/fsl-community-bsp/wandboard-quad/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/qt-in-industrial-embedded-smarthome/0.0+gitrAUTOINC+4b
10cbfd32-r3/temp/run.do_configure.23844:1 exit 2 from
|   PROFILES="`ls *.pro`"
| ERROR: Function failed: do_configure (log file is located at /opt/yocto/fsl-community-bsp/wandboard-quad/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/qt
-in-industrial-embedded-smarthome/0.0+gitrAUTOINC+4b10cbfd32-r3/temp/log.do_configure.23844)

Alex Gonzalez (1):
  qt-in-use: use autotools-brokensep

 recipes-qt/qt-in-use/qt-in-industrial-embedded-common.inc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)