[meta-freescale] [PATCH 3/3][meta-fsl-arm] mxs: Convert to zImage

[b19406 at freescale.com]

> From: Fabio Estevam [mailto:fabio.estevam at freescale.com]
> U-boot mainline uses zImage as the image type, so let's use zImage by
> default in mxs-base.inc.
> 
> Boards that use uImage can still override it by passing:
> KERNEL_IMAGETYPE = "uImage"
> 
> in their .conf file.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Tested-by: Daiane Angolini <daiane.angolini at freescale.com>


> ---
>  conf/machine/imx23evk.conf        | 1 -
>  conf/machine/imx28evk.conf        | 1 -
>  conf/machine/include/mxs-base.inc | 2 ++
>  3 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/conf/machine/imx23evk.conf b/conf/machine/imx23evk.conf
> index 28dede7..5b79690 100644
> --- a/conf/machine/imx23evk.conf
> +++ b/conf/machine/imx23evk.conf
> @@ -11,7 +11,6 @@ SOC_FAMILY = "mxs:mx23"
>  IMXBOOTLETS_MACHINE = "stmp378x_dev"
>  UBOOT_MACHINE = "mx23evk_config"
> 
> -KERNEL_IMAGETYPE = "zImage"
>  KERNEL_DEVICETREE = "imx23-evk.dtb"
> 
>  SDCARD_ROOTFS ?=
> "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
> diff --git a/conf/machine/imx28evk.conf b/conf/machine/imx28evk.conf
> index e633487..86123c3 100644
> --- a/conf/machine/imx28evk.conf
> +++ b/conf/machine/imx28evk.conf
> @@ -15,7 +15,6 @@ UBOOT_CONFIG[sd] = "mx28evk_config,sdcard"
>  UBOOT_CONFIG[nand] = "mx28evk_nand_config,ubifs"
>  UBOOT_CONFIG[sd-auart-console] =
> "mx28evk_auart_console_config,sdcard"
> 
> -KERNEL_IMAGETYPE = "zImage"
>  KERNEL_DEVICETREE = "imx28-evk.dtb"
> 
>  SDCARD_ROOTFS ?=
> "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
> diff --git a/conf/machine/include/mxs-base.inc
> b/conf/machine/include/mxs-base.inc
> index a0fc0d7..40cfa0f 100644
> --- a/conf/machine/include/mxs-base.inc
> +++ b/conf/machine/include/mxs-base.inc
> @@ -41,3 +41,5 @@ INHERIT += "fsl-dynamic-packagearch"
>  MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
> 
>  SERIAL_CONSOLE = "115200 ttyAMA0"
> +
> +KERNEL_IMAGETYPE = "zImage"
> --
> 1.9.1