[meta-freescale] No sound on nitrogen6x + linux-boundary 3.10.17

Erik Botö erik.boto at pelagicore.com
Tue May 6 07:39:47 PDT 2014


Hi,

On Tue, May 6, 2014 at 4:04 PM, Eric Nelson
<eric.nelson at boundarydevices.com> wrote:
> Hi Fabio,
>
>
> On 05/05/2014 04:27 PM, Fabio Estevam wrote:
>>
>> On Mon, May 5, 2014 at 8:22 PM, Troy Kisky
>> <troy.kisky at boundarydevices.com> wrote:
>>>
>>> On 5/5/2014 12:31 PM, Eric Nelson wrote:
>>>>
>>>> Thanks for the detailed report, Erik.
>>>>
>>>> And thanks for the info, Fabio and John.
>>>>
>>>> I'm out of the office today, but CC'ing Troy to see if he can reproduce
>>>> things.
>>>>
>>> I just did a similar fix for the problem, but I also reset registers to
>>> power on
>>> default value.
>>
>>
>> Like this one, I guess:
>>
>> https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/sound/soc/codecs/sgtl5000.c?id=af8ee11209e749c75eabf32b2a4ca631f396acf8
>>
>
> Essentially yes.
>
> Troy pulled in an older patch that also has some retry logic
> around I2C reads and writes:
>         https://github.com/boundarydevices/linux-imx6/commit/c8e4e642
>
> Erik, I'll forward a patch against linux-boundary_3.10.17.bb later
> today, but you can test by changing SRCREV to
>         fe41f1e14c1769c2012b21ac6375ddb1ab15ea52

I tried that now but I still can't play anything using alsa (or
anything else I've tried). Note that this is not just after reboot, I
also don't have working audio after a cold boot. Looking at the kernel
output from boot it looks like the driver load just fine, and I have
the device under /dev/snd/pcmC0D0p and it's listed using aplay -L:


Has anyone been able to test using a sabrelite or nitrogen6x to see if
they get the same result? I just use aplay to play a test file from
alsa (/usr/share/sounds/alsa/Front_Left.wav on most linux systems).

>
> Regards,
>
>
> Eric
>



-- 
=============================================
Erik Botö
Senior Software Engineer
Pelagicore AB
Ekelundsgatan 4, 6tr, SE-411 18 Gothenburg, Sweden
Mobile: +46 (0)76 881 72 03
E-Mail: erik.boto at pelagicore.com
=============================================


More information about the meta-freescale mailing list