[meta-freescale] [meta-fsl-arm-extra][PATCH 2/2] wandboard: Change kernel to 3.10.17
John Weber
rjohnweber at gmail.com
Tue Mar 25 10:47:13 PDT 2014
Hi Fabio -
On 3/24/14, 3:15 PM, Fabio Estevam wrote:
> Hi John,
>
> On Mon, Mar 24, 2014 at 4:58 PM, John Weber <rjohnweber at gmail.com> wrote:
>> Move default kernel selection to 3.10.17 in advance of the 1.6 release,
>> because currently 3.0.35_4.0.0 is broken in master. There are known issues
>> with the kernel that will be resolved with community assistance. These
>> include:
>>
>> - HDMI: Using X11 causes HDMI output to default to 1024x768 resolution
>> regardless of the 'video=mxcfb...' bootarg selection.
>> - HDMI, EDID: Does not work (but this did not work on 3.0.35 either).
>> - Sound, SGTL5000: After POR, the codec chip works fine. However, after
>> playing sound through the coded, a board soft reset or pushbutton
>> reset results in a hung I2C2 bus, causing devices on i2c2 to fail
>> to initialize.
> I have fixed this issue already:
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/soc/codecs/sgtl5000.c?id=af8ee11209e749c75eabf32b2a4ca631f396acf8
>
> Regards,
>
> Fabio Estevam
Thanks for your help with this. I was able to make the correct changes this
time and fixed the problem. Just sent a v2.
John
More information about the meta-freescale
mailing list