[meta-freescale] [meta-fsl-arm-extra][PATCH 2/2] wandboard: Change kernel to 3.10.17

[Fabio Estevam]

Hi John,

On Mon, Mar 24, 2014 at 4:58 PM, John Weber <rjohnweber at gmail.com> wrote:
> Move default kernel selection to 3.10.17 in advance of the 1.6 release,
> because currently 3.0.35_4.0.0 is broken in master.  There are known issues
> with the kernel that will be resolved with community assistance.  These
> include:
>
> - HDMI:  Using X11 causes HDMI output to default to 1024x768 resolution
>          regardless of the 'video=mxcfb...' bootarg selection.
> - HDMI, EDID:  Does not work (but this did not work on 3.0.35 either).
> - Sound, SGTL5000: After POR, the codec chip works fine.  However, after
>          playing sound through the coded, a board soft reset or pushbutton
>          reset results in a hung I2C2 bus, causing devices on i2c2 to fail
>          to initialize.

I have fixed this issue already:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/sound/soc/codecs/sgtl5000.c?id=af8ee11209e749c75eabf32b2a4ca631f396acf8

Regards,

Fabio Estevam