[meta-freescale] [meta-fsl-arm-extra][PATCH 3/3] quartz: Add machine config

[Tony Felice]

Hi Daiane,

I forgot to mention this, but the quartz_nand_config u-boot config
target supports both SD card boot and NAND boot. I can change the quartz
machine config to specify separate SD and NAND u-boot config targets, or
better document that the quartz_nand_config target supports both SD and
NAND. Let me know which you would prefer.

Thanks,

Tony

On Tue, 2014-03-18 at 12:27 -0400, Daiane.Angolini at freescale.com wrote:
> 
> > -----Original Message-----
> > From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> > bounces at yoctoproject.org] On Behalf Of Anthony Felice
> > Sent: Tuesday, March 18, 2014 1:16 PM
> > To: meta-freescale at yoctoproject.org
> > Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 3/3] quartz: Add
> > machine config
> > 
> > This commit adds a machine configuration for the Device Solutions Quartz
> > Vybrid board.
> > 
> > Signed-off-by: Anthony Felice <tony.felice at timesys.com>
> > ---
> >  conf/machine/quartz.conf | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> >  create mode 100644 conf/machine/quartz.conf
> > 
> > diff --git a/conf/machine/quartz.conf b/conf/machine/quartz.conf new file
> > mode 100644 index 0000000..0843b76
> > --- /dev/null
> > +++ b/conf/machine/quartz.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: Device Solutions Quartz Vybrid Development Kit
> > +#@SOC: vf60
> > +#@DESCRIPTION: Machine configuration for Device Solutions Quartz Vybrid
> > +Development Kit
> > +#@MAINTAINER: Anthony Felice <tony.felice at timesys.com>
> > +
> > +include conf/machine/include/imx-base.inc include
> > +conf/machine/include/tune-cortexa5.inc
> > +
> > +SOC_FAMILY = "vf60"
> > +
> > +PREFERRED_PROVIDER_virtual/kernel = "linux-timesys"
> > +PREFERRED_PROVIDER_u-boot = "u-boot-timesys"
> > +
> > +UBOOT_MACHINE = "quartz_nand_config"
> 
> I was expecting to have something using UBOOT_CONFIG with 2 options (sdcard and nand)
> from your u-boot patch.
> 
> Something like 
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-arm/tree/conf/machine/imx6qsabresd.conf#n13
> 
> Would you mind to double check it?
> 
> I don´t have any other comment on this patchset ;-)
> 
> Daiane
> > +
> > +SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
> > +IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard"
> > +
> > +SERIAL_CONSOLE = "115200 ttymxc0"
> > +
> > +MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa touchscreen"
> > --
> > 1.9.0
> > 
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> > 
> 

-- 
Tony Felice
Vybrid Technical Lead
Timesys Corporation