[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2014-03-05
Otavio Salvador
otavio at ossystems.com.br
Wed Mar 5 08:31:03 PST 2014
Hello,
I pushed following updates:
commit ce114d5a71b2977314f9a92a8bd27e1dfe4726a8
Author: Eric Nelson <eric.nelson at boundarydevices.com>
Date: Tue Mar 4 18:11:03 2014 -0700
u-boot-script-boundary: update to match v2014.01 release
The only difference in the boot script for this release is
the inclusion of support for reading environment variables
through uEnv.txt at the start of the boot script.
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
commit 0adcbf1b54e5b7c507dbd3538b0da77bd626d017
Author: Eric Nelson <eric.nelson at boundarydevices.com>
Date: Tue Mar 4 18:11:02 2014 -0700
u-boot-boundary: update to v2014.01
Update to v2014.01 release as described in this post:
http://boundarydevices.com/u-boot-2014-01/
The primary new feature is USB OTG support, but this
release also includes a re-structuring of the pin-muxing
constants in preparation for SPL boot.
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
commit 17f9a4042ffe5ce0c144a8d33714cde8361ff480
Author: Anthony Felice <tony.felice at timesys.com>
Date: Mon Mar 3 17:23:12 2014 -0500
pcm052: Add machine config
This commit adds a machine configuration for the Phytec phyCORE (pcm052) Vybrid
board.
Signed-off-by: Anthony Felice <tony.felice at timesys.com>
commit 6f79ede2fa4298b95b1d6997c6969ce52fe1923a
Author: Anthony Felice <tony.felice at timesys.com>
Date: Mon Mar 3 17:23:11 2014 -0500
linux-timesys: Add customized kernel
This kernel is based on linux-timesys 3.0.15, and adds commits for pcm052
support that include:
* Add FEC1 support
* Add QSPI NOR support
* Add PWM backlight support
* Enable watchdog
* Fix DCU settings
* New defconfig (i.e. pcm052)
This kernel has been tested on the pcm052 platform.
Signed-off-by: Anthony Felice <tony.felice at timesys.com>
commit 1cef72fa9911aac6419b1e7c17ecf5c55a130402
Author: Anthony Felice <tony.felice at timesys.com>
Date: Mon Mar 3 17:23:10 2014 -0500
pcl052: Add machine config
This commit adds a machine configuration for the Phytec Cosmic (pcl052) Vybrid
board.
Signed-off-by: Anthony Felice <tony.felice at timesys.com>
commit 10f7914ecde7353cdee05bd78967e551bf0eb123
Author: Anthony Felice <tony.felice at timesys.com>
Date: Mon Mar 3 17:23:09 2014 -0500
linux-timesys: Add customized kernel
This kernel is based on linux-timesys 3.0.15, and adds commits for pcl052
support that include:
* Add HDMI support
* Add LED GPIO support
* Fix DCU multiplier calculation
* Fix USB Gadget
* New defconfig (i.e. pcl052)
This kernel has been tested on the pcl052 platform.
Signed-off-by: Anthony Felice <tony.felice at timesys.com>
commit 80015d68208dc325d71dc7e24b6701a23a865fa7
Author: Anthony Felice <tony.felice at timesys.com>
Date: Mon Mar 3 17:23:08 2014 -0500
u-boot-timesys: Add version 2011.12
Add some commits over u-boot 2011.12 with board support for the pcl052 and
pcm052 platforms, that include:
* Add NAND boot support
* Add FEC1 support
* Fix DDR3 settings for pcm052 1.1 silicon
* Fix SDHC issues
* New machine definitions (i.e. pcl052, pcm052)
and more, for a total of 25 commits. Included in these commits is also base
support for the Vybrid Tower platform.
Commits from the u-boot-cfi-flash fork from 2012-03-21 and earlier have also
been added, starting from commit 85c344e5f98: "cfi: fix the incomplete erased
status check in buffer write".
This version has been tested on the pcl052 and pcm052 platforms.
Signed-off-by: Anthony Felice <tony.felice at timesys.com>
Regards,
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list