[meta-freescale] gpu-viv-bin-mx6q from 3.10.17 -> 3.5.7?

[randy.krakora at freescale.com]

Yes, unfortunately Eric is right. :)

I need to back port from 3.10.17 to 3.5.7, although I found out 3.0.35 has the patches that 3.10.17 does for this as well, so maybe starting from there would be better.

Regards,
Randy Krakora

> On Jun 25, 2014, at 10:42 AM, "Otavio Salvador" <otavio at ossystems.com.br> wrote:
> 
> On Tue, Jun 24, 2014 at 6:32 PM, Eric Nelson
> <eric.nelson at boundarydevices.com> wrote:
>> On 06/24/2014 02:06 PM, Otavio Salvador wrote:
>>> On Mon, Jun 23, 2014 at 10:25 PM, Daiane.Angolini at freescale.com
>>> <Daiane.Angolini at freescale.com> wrote:
>>>>> I want to update the 3.5.7 gpu-viv-bin-mx6q from 3.10.17...
>>>>> 
>>>>> I've started editing the layer.conf file and moving some .bb files around
>>>>> and etc. But this seems like too much effort to be correct.
>>>>> 
>>>>> Can someone at least point me in the right direction to do something like
>>>>> this?
>>>> 
>>>> The trick is not on recipe side.
>>>> 
>>>> The trick is to find the right patchset to upgrade the GPU driver in kernel
>>>> 
>>>> The recipes you solve with a simple diff.
>>> 
>>> Check:
>>> 
>>> https://github.com/Freescale/meta-fsl-arm-extra/blob/master/recipes-kernel/linux/linux-boundary-3.0.35/ENGR00278350-gpu-viante-4.6.9p13-kernel-part-integra.patch
>>> 
>>> This should apply fine (I hope).
>> 
>> I think you missed something. Randy was asking about migrating
>> (down-grading) from 3.10.17 to 3.5.7...
>> 
>> This patch goes the other direction (3.0.35->3.5.7).
> 
> Humm maybe. Randy, could you clarify it?
> 
> -- 
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
> -- 
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale