[meta-freescale] Atheros AR6103 imx28evk

[Alejandro.Lozano at freescale.com]

Thank you Otavio,

Your help is very appreciated. I just have one doubt, the .inc file you mention contains the below:


# Provides the i.MX6 SABRE SD common settings

require conf/machine/include/imx-base.inc
require conf/machine/include/tune-cortexa9.inc

SERIAL_CONSOLE = "115200 ttymxc0"

MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"

MACHINE_FEATURES += " pci wifi bluetooth"


It seems that applies only for the imx6, does the same file work for the imx28?
I cannot find any MACHINE_FIRMWARE_append_xxx for the imx28. 

Best Regards,
Alejandro

-----Original Message-----
From: otavio.salvador at gmail.com [mailto:otavio.salvador at gmail.com] On Behalf Of Otavio Salvador
Sent: Thursday, June 05, 2014 12:14 PM
To: Lozano Lozano Alejandro-B31117
Cc: meta-freescale at yoctoproject.org
Subject: Re: [meta-freescale] Atheros AR6103 imx28evk

On Mon, Jun 2, 2014 at 6:57 PM, Alejandro.Lozano at freescale.com <Alejandro.Lozano at freescale.com> wrote:
> I wonder if someone has been able to use the AR6103 for the imx28evk. 
> I was able to generate the .ko modules using the mainline kernel.
>
> The wireless-tools are added in the rootfs but I cannot find a way to 
> include the atheros firmware.  The /lib/firmware/ath6k folder and 
> files do not exist.
>
> I have found instructions for the imx6q but I do not know if they 
> apply for the imx28evk.
...
> Does anybody have the steps to make the AR6103 work in the imx28evk?

Try to use linux-firmware as we do nowadays[1].

1. http://git.yoctoproject.org/cgit.cgi/meta-fsl-arm/tree/conf/machine/include/imx6sabresd-common.inc#n8

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750