[meta-freescale] [meta-fsl-arm][PATCH v2] linux-imx-rt: Add initial recipe

[Jacob Kroon]

Hi Daiane,

On Thu, Jun 5, 2014 at 6:51 PM, Daiane Angolini <daiane.list at gmail.com>
wrote:

> >> >>> I loaded the linux-imx-rt in my imx6qsabresd boad. I used the
> >> >>> core-image-base and I faced some kernel errors during the boot.
> >> >>> What did you change in the default poky configuration in order to
> work
> >> >>> with linux-imx-rt?
> >> >>>
> >> >>
> >> >> I haven't seen these errors myself on my imx6qsabresd board, although
> >> >> I'm
> >> >> using bare OE-core and Bitbake and a custom distro file.
> >> >> I'll try building the default core-image-base from poky and see if I
> >> >> can
> >> >> reproduce it.
> >> >
> >> > Thanks a lot.
> >> >
> >> > I really think it's a configuration matter and I'm not surprised to
> >> > know you're using your custom distro ;)
> >> >
> >> > It should be regarding the default/custom rootfs initialization
> >> > approach. I wouldn't say it's a kernel problem before understanding
> >> > exactly what is needed for this kernel uploading.
> >> >
> >>
> >> Has been this sorted out?
> >>
> >
> > I haven't had the time yet to test building poky, but it's on my todo
> > list...
> >
>
> Hi Jacob,
>
> Did you tested the kernel building with poky?
>
>
>
I finally(!) did a build today, but I am not seeing the errors in your boot
message
for some reason. I do not have anything connected to the device except a
HDMI-cable, ethernet cable, and USB-to-serial wire for logging into the
console.
What does your setup look like, did you have any other devices connected ?

I built a "core-image-base" using the poky, without any specific distro
modifications, with meta-fsl-arm layer, latest daisy branches as of today.

I've uploaded the boot log here: http://pastebin.com/LeB9YyVv

/Jacob
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140607/a5f9282c/attachment.html>