[meta-freescale] Freescale i.MX6 SabreSD vs 1024x768 over HDMI

[zboszor at pr.hu]

> You need to make sure your monitor will support 1024x768 - not all
monitors do. I had a similar issue with my monitor reverting to 640x480
because it didn't support the mode I had set.
> Try this from Linux command line:
>
> cat /sys/class/graphics/fb0/modes

root at imx6qsabresd:~# cat /sys/class/graphics/fb0/modes
V:640x480p-60
D:1920x1080p-60
V:640x480p-60

I also tried my HD-ready TV with a HDMI connector.
It gave me a lot of resolutions but 1024x768 is missing.
Thanks to all who gave me pointers.

Best regards,
Zoltán Böszörményi