[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2014-07-21

[Otavio Salvador]

Hello,

I pushed following updates:

commit c3b74cd1de4fba69f14ef6366fdc15f11d32e485 (HEAD, fslc/master-next, fslc/master, pending)
Author: John Weber <rjohnweber at gmail.com>
Date:   Tue Jul 15 15:01:13 2014 -0500

    linux-wandboard (3.0.35): remove recipe and associated files
    
    Now that kernel 3.0.35 is no longer being updated, and that 3.10.17 is now GA and
    supports current GPU libraries, remove linux-wandboard (3.0.35).
    
    Signed-off-by: John Weber <rjohnweber at gmail.com>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit 5ee7d28984232229e922f9ba3a246c32e2640e84
Author: John Weber <rjohnweber at gmail.com>
Date:   Tue Jul 15 15:01:12 2014 -0500

    linux-firmware: add bbappend to modify firmware file names
    
    Upstream changes to the brcmfmac driver require a change to the firmware
    file names to match the devid and interface type of the Broadcom chipset.
    This also makes it easier for one machine to support multiple chipets in
    Yocto.
    
    Signed-off-by: John Weber <rjohnweber at gmail.com>
    Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit 8686b4a98481d3c5a9e512dbe1f37689b49f2d56
Author: John Weber <rjohnweber at gmail.com>
Date:   Tue Jul 15 15:01:11 2014 -0500

    linux-wandboard (3.10.17): Update SRCREV to 13697f2 and update defconfig
    
    The update to the Wandboard Linux kernel includes the following changes:
    - wandboard_defconfig: Enable CONFIG_USB_OTG
    - wandboard/dts: Fix USB OTG
    - wand-rfkill: Change gpio depending on wandboard revision
    - wandboard: dts: Add alternate pin support for rev C1
    - brcmfmac: Use fw filename and nvram based of devid for sdio.
    - wandboard: add revision detect pin to rfkill driver
    - wandboard/dts: change EDM gpio to open drain
    - wandboard/dts: Enable lcdif in devicetree
    - wandboard/dts: add fusion touchscreen to devicetree
    - wandboard: Fix bluetooth
    
    Signed-off-by: John Weber <rjohnweber at gmail.com>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit c92573efffe0ef19d72f08d6083e77913cd57d3c
Author: John Weber <rjohnweber at gmail.com>
Date:   Tue Jul 15 15:01:10 2014 -0500

    broadcom-nvram-config: separate recipes to different chipsets
    
    Upstream driver changes cause the driver to request firmware based on
    the device ID (e.g. 4329, 4330).  This also applies to the nvram config
    file.  Restructure the recipes and separate by chipset.
    
    Modify conf/machine to use chipset-specific broadcom nvram packages
    
    Signed-off-by: John Weber <rjohnweber at gmail.com>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

Regards,

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750