[meta-freescale] VPU_EncGetVersionInfo failed

[Allan Matthew]

I believe I found the issue.  In my device tree I had the VPU supply set to
pu_dummy when it should have been set to a regulator.  Seems to have fixed
the issue.

*Allan Matthew*
Embedded Software Engineer, 3DRx
*3D Robotics*
(858) 225-1414
website <http://www.3dr.com/> | facebook
<http://www.facebook.com/3drobotics> | instagram
<http://www.instagram.com/3drobotics>


On Mon, Jul 14, 2014 at 7:36 AM, Lauren Post <Lauren.Post at freescale.com>
wrote:

>  Sorry I was wrong on my part numbers – that is a solo which does have a
> VPU.  The DTS for solo and dual lite are the same.
>
>
>
> *From:* meta-freescale-bounces at yoctoproject.org [mailto:
> meta-freescale-bounces at yoctoproject.org] *On Behalf Of *Lauren Post
> *Sent:* Monday, July 14, 2014 9:28 AM
> *To:* Allan Matthew
> *Cc:* meta-freescale at yoctoproject.org
> *Subject:* Re: [meta-freescale] VPU_EncGetVersionInfo failed
>
>
>
> On Fri, Jul 11, 2014 at 3:41 PM, Otavio Salvador <otavio at ossystems.com.br>
> wrote:
>
> On Fri, Jul 11, 2014 at 6:08 PM, Allan Matthew <amatthew at 3drobotics.com>
> wrote:
> > I'm using a custom MCIMX6S5EVM10AC board and am having an issue with the
> > vpuenc gstreamer plugin.  I'm able to otherwise use gstreamer plugins
> like
> > mfw_v4lsink, tvsrc, mfw_isink etc but the vpu does not seem to be
> working.
> > When invoking vpuenc with the h.264 codec, I get the following debug
> error
> > from gst-launch:
> >
> >  0:00:02.613795334  1154   0x389920 ERROR                 vpuenc
> > vpuenc.c:441:vpuenc_core_init: func VPU_EncGetVersionInfo failed!! with
> ret
>
>
>
> This part you are using is a i.MX 6 Solo Lite chip which does not have a
> VPU.  That is why you are getting this failure.
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140714/43bd0758/attachment-0001.html>