[meta-freescale] imx53qsb + yocto + latest kernel.
ssinfod ssinfod
ssinfod at gmail.com
Wed Jul 2 07:50:59 PDT 2014
Can somebody help me with my issue ?
Thanks
ssinfod
On Wed, Jun 25, 2014 at 11:33 PM, ssinfod ssinfod <ssinfod at gmail.com> wrote:
> Hello, I am trying to build the core-image-base *with the latest kernel*
> for the imx53qsb.
>
> I modified local.conf file to add "PREFERRED_PROVIDER_virtual/kernel".
>
> Here is my local.conf:
>
> BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
> PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
> MACHINE ??= 'imx53qsb'
> DISTRO ?= 'poky'
> *PREFERRED_PROVIDER_virtual/kernel = "linux-fslc"*
> PACKAGE_CLASSES ?= "package_rpm"
> EXTRA_IMAGE_FEATURES = "debug-tweaks"
> USER_CLASSES ?= "buildstats image-mklibs image-prelink"
> PATCHRESOLVE = "noop"
> BB_DISKMON_DIRS = "\
> STOPTASKS,${TMPDIR},1G,100K \
> STOPTASKS,${DL_DIR},1G,100K \
> STOPTASKS,${SSTATE_DIR},1G,100K \
> ABORT,${TMPDIR},100M,1K \
> ABORT,${DL_DIR},100M,1K \
> ABORT,${SSTATE_DIR},100M,1K"
> PACKAGECONFIG_pn-qemu-native = "sdl"
> PACKAGECONFIG_pn-nativesdk-qemu = "sdl"
> ASSUME_PROVIDED += "libsdl-native"
> CONF_VERSION = "1"
>
> BB_NUMBER_THREADS = '1'
> PARALLEL_MAKE = '-j 1'
>
> DL_DIR ?= "${BSPDIR}/downloads/"
> ACCEPT_FSL_EULA = ""
>
>
> The bitbake of core-image-base when through without error.
> However, the imx53qsb is not booting.
> Here is the log from the serial console :
>
> U-Boot 2014.01 (Jun 24 2014 - 04:01:10)
>
> Board: MX53 LOCO
> I2C: ready
> DRAM: 1 GiB
> MMC: FSL_SDHC: 0, FSL_SDHC: 1
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
> Reset cause: POR
> Net: FEC
> Hit any key to stop autoboot: 0
> mmc0 is current device
> reading boot.scr
> ** Unable to read file boot.scr **
> reading uImage
> ** Unable to read file uImage **
> Booting from net ...
> BOOTP broadcast 1
> BOOTP broadcast 2
> BOOTP broadcast 3
> BOOTP broadcast 4
> BOOTP broadcast 5
>
> Retry count exceeded; starting again
> BOOTP broadcast 1
>
>
> It seems to be related to boot.scr and uImage..
> I prepared the SD card like always with the dd command:
> sudo dd if=core-image-base-imx53qsb.sdcard of=/dev/sdb bs=1M
>
> Any idea of what is wrong ?
>
> Thanks
> ssinfod
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140702/938a92e6/attachment.html>
More information about the meta-freescale
mailing list