[meta-freescale] SX-SDCAN

Morgan McKenzie rmtm at uvic.ca
Thu Jan 30 11:41:37 PST 2014


Hi,
Thanks for the feedback, I was thinking of posting there but hadn't got around to it yet. It's weird - I used to have it working with LTIB back a few months ago (well, almost a year) and I have a really similar configuration on the board now.
Anyways, thanks for your help - hopefully someone in the imx-community will know.
Regards,
Morgan McKenize

> Date: Thu, 30 Jan 2014 08:59:43 -0200
> From: daiane.angolini at freescale.com
> To: rmtm at uvic.ca; meta-freescale at yoctoproject.org
> Subject: Re: [meta-freescale] SX-SDCAN
> 
> On 30-01-2014 03:03, Morgan McKenzie wrote:
> > Anyone?
> >
> > ------------------------------------------------------------------------
> > From: rmtm at uvic.ca
> > To: meta-freescale at yoctoproject.org
> > Subject: SX-SDCAN
> > Date: Wed, 22 Jan 2014 18:42:54 -0700
> >
> > Hi,
> >
> > I don't know if anyone else has near the same configuration as me - but
> > I've been trying to enable the SX-SDCAN module for my imx6q sabre auto
> > board. I've searched google and come up with a few things but none
> > resulting in a fix, and am going to contact the manufacturer to see if
> > they can help.
> >
> > I've built up an image based on core-image - I haven't configured the
> > kernel but Atheros ath6kl support is enabled as a module.
> >
> >
> > I was wondering if anyone has had experience with it (and more
> > particularly success?)
> 
> no
> 
> >
> > During the board's boot cycle it gives the following messages:
> >
> >     ath6kl: Failed to get board file ath6k/AR6003/hw2.1.1/bdata.bin
> >     (-2), trying to find default board file.
> >     ath6kl: Failed to get default board file
> >     ath6k/AR6003/hw2.1.1/bdata.SD31.bin: -2
> >     ath6kl: Failed to init ath6kl core
> >     ath6kl_sdio: probe of mmc1:0001:1 failed with error -2
> >
> > And, these are the contents of /lib/firmware/ath6k/AR6003/hw2.1.1, so it
> > seems to have the things I need there:
> >
> >     athwlan.bin
> >
> >     bdata.SD31.bin
> >
> >     bdata.SD32.bin
> >     bdata.WB31.bin
> >     bdata.bin -> bdata.SD31.bin
> >     bdata.patch.bin
> >     endpointpoing.bin
> >     fw-2.bin
> >     fw-3.bin
> >     opt.bin
> >
> >
> > Any help would be much appreciated!
> 
> So, you do have the module (*.ko) and you do have the firmware. I think 
> you have everything needed. The only missing piece would be the wifi 
> tools to control it.
> 
> What's your board? What changes did you make?
> 
> This is not exactly the right place to get help on this kind of issue 
> (as it does not related with yocto). Have you tried to post your 
> question in imx-community?
> 
> 
> Daiane
> >
> >
> > Morgan McKenzie
> >
> >
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >
> 
> 
> -- 
> Daiane
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140130/97fc4536/attachment-0001.html>


More information about the meta-freescale mailing list