[meta-freescale] [meta-fsl-arm][PATCH v3 00/11] Freescale 3.10.17-1.0.0-beta - part 1

[Otavio Salvador]

Hello Eric,

On Sat, Jan 25, 2014 at 1:02 AM, Eric Nelson
<eric.nelson at boundarydevices.com> wrote:
> On 01/24/2014 01:37 PM, Otavio Salvador wrote:
>>
>> Hello Eric,
>>
>> On Fri, Jan 24, 2014 at 3:18 PM, Eric Nelson
>> <eric.nelson at boundarydevices.com
>> <mailto:eric.nelson at boundarydevices.com>> wrote:
>>  > On 01/23/2014 06:47 PM, Otavio Salvador wrote:
>>  >> I did some small fixes that I found during test at O.S. Systems'
>>  >> autobuilder and I dropped some fixes that were pushed to master (as
>>  >> you've probably noticed from the e-mail to the mailing list).
>>  >>
>>  >> I am awaiting people's feedback for the patches as this upgrades
>>  >> package versions and we should have a better test coverage.
>>  >>
>>  >> Please give a try in the 'master-next' branch and comment in anything
>>  >> that could be improved in the patches. All comments are welcome...
>>  >>
>
>>  >> <snip>
>
>>  >>
>>  >
>>  > I compile-tested the series against MACHINE="nitrogen6x" and
>>  > MACHINE="nit6xlte" with target image "fsl-image-gui".
>>
>> Thank you.
>>
>>  > The only compile-time issue was with clocks.sh and the imx_test recipe
>>  > as noted separately.
>>
>> Please confirm you have the current patchset; you may have used the v2
>> were this was indeed the case. The v3,
>> http://patchwork.openembedded.org/patch/65673/, should be fine.
>>
>
> Maybe.
>
> I'm having trouble piecing this together, but I'm running master-next
> directly.
>
> Unfortunately, the patch version gets dropped on the way into git
> and I'm not seeing a V2 in either the ML archive or patchwork.
>
> I'm also not finding a "--- changed in V3" comment anywhere.

Yes; it is a little bit hard for me to keep track of the patchset (as
we usually do in U-Boot and like) as I've been using Gerrit to review
those patches internally before putting them in the mailing list and
patman requires also those extra header in the commit log.

I will try to think how to improve it for future submissions ...

I keep master-next updated with the very last revision. I just did it
again after pushing your patch.

>>  > Run-time testing showed that the GPU binaries still need to be
>>  > updated from 1_3.10.9-1.0.0-hfp-r0, so X wouldn't start.
>>
>> Hum this is not expected as I didn't include GPU changes on this. Can
>> you send the Xorg.0.log?
>>
> I'll send this in the A.M.. I don't have access to it at the moment.
>
> This was expected though, right?
>
> We haven't been able to get even the frame-buffer versions of the
> libraries to operate against the 3.10.9 libraries and presumed an
> ABI break here.

If you are running 3.10.17 this is expected as it uses p13 GPU
version. Otherwise it ought to work just fine.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750