[meta-freescale] 3.10.17-1.0.0_beta meta-fsl-bsp-release layer

[Alok Kumar]

Oh I think I was building core-image-base. Will check this out.


On Thu, Jan 23, 2014 at 11:06 AM, Gary Thomas <gary at mlbassoc.com> wrote:

> On 2014-01-23 08:20, Alok Kumar wrote:
>
>> I have include meta-gnome in bblayer.conf, but I dont see any X server
>> running.
>>
>> what should I include  in local.conf to get X running?
>>
>
> What image did you build?  Something like core-image-sato or fsl-image-gui
> will
> get you an X server running on your hardware.
>
> n.b. please keep replies on the mailing list so that everyone can benefit.
>
>  On Thu, Jan 23, 2014 at 10:14 AM, Gary Thomas <gary at mlbassoc.com <mailto:
>> gary at mlbassoc.com>> wrote:
>>
>>     On 2014-01-23 08:08, Alok Kumar wrote:
>>
>>         Eric,
>>
>>         After building chromium, when I tried to launch it
>>
>>         find / -name "chrome*"
>>         /usr/bin/chrome
>>         /usr/bin/chrome/chrome_100___percent.pak
>>
>>         /usr/bin/chrome/chrome
>>         /usr/bin/chrome/chrome.pak
>>
>>         I get following error.
>>         /usr/bin/chrome/chrome
>>
>>         (chrome:2068): Gtk-WARNING **: cannot open display:
>>
>>         Any thoughts, what I am missing here.
>>
>>
>>     Do you have X running?
>>
>>     If you tried to run this from outside the X desktop, you'll need to
>> do something like
>>        DISPLAY=:0.0 /usr/bin/chrome/chrome
>>
>>
>>         On Mon, Jan 20, 2014 at 10:14 PM, Eric Nelson
>> <eric.nelson at boundarydevices.__com <mailto:eric.nelson@
>> boundarydevices.com> <mailto:eric.nelson at __boundarydevices.com
>>
>>         <mailto:eric.nelson at boundarydevices.com>>> wrote:
>>
>>              Hi Alok,
>>
>>
>>              On 01/20/2014 09:44 AM, Alok Kumar wrote:
>>
>>                  Hi Eric,
>>
>>                  I am not sure if I understand it. my apology.
>>
>>
>>              No sweat. Over a year in and I'm still figuring things out...
>>
>>
>>                  I am following this
>>         http://wiki.wandboard.org/____index.php/Getting_started_____
>> with_Yocto_on_Wandboard <http://wiki.wandboard.org/__
>> index.php/Getting_started___with_Yocto_on_Wandboard>
>>
>>         <http://wiki.wandboard.org/__index.php/Getting_started___
>> with_Yocto_on_Wandboard <http://wiki.wandboard.org/
>> index.php/Getting_started_with_Yocto_on_Wandboard>>
>>
>>
>>                  and took stable dora branch.
>>
>>
>>              I'd start with Daiane's docs on i.MX Community:
>>         http://layers.openembedded.____org/layerindex/branch/master/____layer/meta-gnome/
>> <http://layers.openembedded.__org/layerindex/branch/master/_
>> _layer/meta-gnome/
>>
>>         <http://layers.openembedded.org/layerindex/branch/master/
>> layer/meta-gnome/>>
>>
>>
>>              And O.S.Systems that describes how to specifically build for
>>              Nitrogen6x:
>>         http://www.ossystems.com.br/____blog/2013/04/15/yocto-with-_
>> ___boundary-devices-nitrogen6x-5-____steps-only.html
>>         <http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__
>> boundary-devices-nitrogen6x-5-__steps-only.html>
>>
>>
>>              <http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__
>> boundary-devices-nitrogen6x-5-__steps-only.html
>>         <http://www.ossystems.com.br/blog/2013/04/15/yocto-with-
>> boundary-devices-nitrogen6x-5-steps-only.html>>
>>
>>              Make sure you use the "dora" branch instead of "dylan"
>> though.
>>
>>
>>                  Now if I want to try chromium" beta,
>>                  a) should I got to development branch first and get
>> everything from below.
>>
>>                          repo init -u
>>         https://github.com/Freescale/____fsl-community-bsp-platform <
>> https://github.com/Freescale/__fsl-community-bsp-platform>
>>
>>         <https://github.com/Freescale/__fsl-community-bsp-platform <
>> https://github.com/Freescale/fsl-community-bsp-platform>> -b master
>>
>>
>>
>>              Again, you should stick with "Dora" unless you need something
>>              specific in "master".
>>
>>
>>                  b) apply chromium recipe on this build and build the
>> image.
>>
>>
>>              After the repo sync, you'll need to pull in the meta-browser
>>              layer:
>>                       ~/yocto/sources$ git clone git://
>> github.com/OSSystems/____meta-browser.git <http://github.com/OSSystems/_
>> _meta-browser.git>
>>         <http://github.com/OSSystems/__meta-browser.git <
>> http://github.com/OSSystems/meta-browser.git>>
>>
>>
>>
>>              And you'll need to add meta-browser and meta-gnome to your
>>              conf/bblayers.conf file:
>>
>>              BBLAYERS = " \
>>                 ...
>>                 ${BSPDIR}/sources/meta-____openembedded/meta-gnome \
>>
>>
>>                 ${BSPDIR}/sources/meta-browser \
>>                 ...
>>              "
>>
>>              And finally, you'll need to pull it into your build.
>>              The easy way is to add this to your local.conf file:
>>
>>              IMAGE_INSTALL += " \
>>                       chromium \
>>              "
>>
>>              I'm not sure why, but when I went through these steps,
>>              I got complaints about the license for libav and
>>              was prompted to add this to local.conf:
>>
>>                       LICENSE_FLAGS_WHITELIST = "commercial"
>>
>>              I think there's something screwy with that, though.
>>              The recipes in poky/meta/recipes-multimedia/____libav/
>>
>>
>>              appear to have a combination of GPL and LGPL
>>              licenses.
>>
>>
>>                  c) where should I test this on Sabrelite or nitorgen6x ?
>>
>>
>>              We recommend the use of "nitrogen6x" for the MACHINE type.
>>              The resulting image will run on either the SABRE Lite
>>              or Nitrogen6X boards.
>>
>>              Regards,
>>
>>
>>              Eric
>>
>>
>>
>>
>>         --
>>         Regards
>>         Alok Kumar
>>
>>
>>         _________________________________________________
>>         meta-freescale mailing list
>>         meta-freescale at yoctoproject.__org <mailto:meta-freescale@
>> yoctoproject.org>
>>         https://lists.yoctoproject.__org/listinfo/meta-freescale <
>> https://lists.yoctoproject.org/listinfo/meta-freescale>
>>
>>
>>     --
>>     ------------------------------__------------------------------
>>
>>     Gary Thomas                 |  Consulting for the
>>     MLB Associates              |    Embedded world
>>     ------------------------------__------------------------------
>>
>>     _________________________________________________
>>     meta-freescale mailing list
>>     meta-freescale at yoctoproject.__org <mailto:meta-freescale@
>> yoctoproject.org>
>>     https://lists.yoctoproject.__org/listinfo/meta-freescale <
>> https://lists.yoctoproject.org/listinfo/meta-freescale>
>>
>>
>>
>>
>> --
>> Regards
>> Alok Kumar
>>
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>



-- 
Regards
Alok Kumar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140123/e58bc255/attachment.html>