[meta-freescale] 3.10.17-1.0.0_beta meta-fsl-bsp-release layer
Gary Thomas
gary at mlbassoc.com
Thu Jan 23 08:06:04 PST 2014
On 2014-01-23 08:20, Alok Kumar wrote:
> I have include meta-gnome in bblayer.conf, but I dont see any X server running.
>
> what should I include in local.conf to get X running?
What image did you build? Something like core-image-sato or fsl-image-gui will
get you an X server running on your hardware.
n.b. please keep replies on the mailing list so that everyone can benefit.
> On Thu, Jan 23, 2014 at 10:14 AM, Gary Thomas <gary at mlbassoc.com <mailto:gary at mlbassoc.com>> wrote:
>
> On 2014-01-23 08:08, Alok Kumar wrote:
>
> Eric,
>
> After building chromium, when I tried to launch it
>
> find / -name "chrome*"
> /usr/bin/chrome
> /usr/bin/chrome/chrome_100___percent.pak
> /usr/bin/chrome/chrome
> /usr/bin/chrome/chrome.pak
>
> I get following error.
> /usr/bin/chrome/chrome
>
> (chrome:2068): Gtk-WARNING **: cannot open display:
>
> Any thoughts, what I am missing here.
>
>
> Do you have X running?
>
> If you tried to run this from outside the X desktop, you'll need to do something like
> DISPLAY=:0.0 /usr/bin/chrome/chrome
>
>
> On Mon, Jan 20, 2014 at 10:14 PM, Eric Nelson <eric.nelson at boundarydevices.__com <mailto:eric.nelson at boundarydevices.com> <mailto:eric.nelson at __boundarydevices.com
> <mailto:eric.nelson at boundarydevices.com>>> wrote:
>
> Hi Alok,
>
>
> On 01/20/2014 09:44 AM, Alok Kumar wrote:
>
> Hi Eric,
>
> I am not sure if I understand it. my apology.
>
>
> No sweat. Over a year in and I'm still figuring things out...
>
>
> I am following this
> http://wiki.wandboard.org/____index.php/Getting_started_____with_Yocto_on_Wandboard <http://wiki.wandboard.org/__index.php/Getting_started___with_Yocto_on_Wandboard>
> <http://wiki.wandboard.org/__index.php/Getting_started___with_Yocto_on_Wandboard <http://wiki.wandboard.org/index.php/Getting_started_with_Yocto_on_Wandboard>>
>
>
> and took stable dora branch.
>
>
> I'd start with Daiane's docs on i.MX Community:
> http://layers.openembedded.____org/layerindex/branch/master/____layer/meta-gnome/ <http://layers.openembedded.__org/layerindex/branch/master/__layer/meta-gnome/
> <http://layers.openembedded.org/layerindex/branch/master/layer/meta-gnome/>>
>
>
> And O.S.Systems that describes how to specifically build for
> Nitrogen6x:
> http://www.ossystems.com.br/____blog/2013/04/15/yocto-with-____boundary-devices-nitrogen6x-5-____steps-only.html
> <http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__boundary-devices-nitrogen6x-5-__steps-only.html>
>
> <http://www.ossystems.com.br/__blog/2013/04/15/yocto-with-__boundary-devices-nitrogen6x-5-__steps-only.html
> <http://www.ossystems.com.br/blog/2013/04/15/yocto-with-boundary-devices-nitrogen6x-5-steps-only.html>>
>
> Make sure you use the "dora" branch instead of "dylan" though.
>
>
> Now if I want to try chromium" beta,
> a) should I got to development branch first and get everything from below.
>
> repo init -u
> https://github.com/Freescale/____fsl-community-bsp-platform <https://github.com/Freescale/__fsl-community-bsp-platform>
> <https://github.com/Freescale/__fsl-community-bsp-platform <https://github.com/Freescale/fsl-community-bsp-platform>> -b master
>
>
>
> Again, you should stick with "Dora" unless you need something
> specific in "master".
>
>
> b) apply chromium recipe on this build and build the image.
>
>
> After the repo sync, you'll need to pull in the meta-browser
> layer:
> ~/yocto/sources$ git clone git://github.com/OSSystems/____meta-browser.git <http://github.com/OSSystems/__meta-browser.git>
> <http://github.com/OSSystems/__meta-browser.git <http://github.com/OSSystems/meta-browser.git>>
>
>
> And you'll need to add meta-browser and meta-gnome to your
> conf/bblayers.conf file:
>
> BBLAYERS = " \
> ...
> ${BSPDIR}/sources/meta-____openembedded/meta-gnome \
>
> ${BSPDIR}/sources/meta-browser \
> ...
> "
>
> And finally, you'll need to pull it into your build.
> The easy way is to add this to your local.conf file:
>
> IMAGE_INSTALL += " \
> chromium \
> "
>
> I'm not sure why, but when I went through these steps,
> I got complaints about the license for libav and
> was prompted to add this to local.conf:
>
> LICENSE_FLAGS_WHITELIST = "commercial"
>
> I think there's something screwy with that, though.
> The recipes in poky/meta/recipes-multimedia/____libav/
>
> appear to have a combination of GPL and LGPL
> licenses.
>
>
> c) where should I test this on Sabrelite or nitorgen6x ?
>
>
> We recommend the use of "nitrogen6x" for the MACHINE type.
> The resulting image will run on either the SABRE Lite
> or Nitrogen6X boards.
>
> Regards,
>
>
> Eric
>
>
>
>
> --
> Regards
> Alok Kumar
>
>
> _________________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.__org <mailto:meta-freescale at yoctoproject.org>
> https://lists.yoctoproject.__org/listinfo/meta-freescale <https://lists.yoctoproject.org/listinfo/meta-freescale>
>
>
> --
> ------------------------------__------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------__------------------------------
>
> _________________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.__org <mailto:meta-freescale at yoctoproject.org>
> https://lists.yoctoproject.__org/listinfo/meta-freescale <https://lists.yoctoproject.org/listinfo/meta-freescale>
>
>
>
>
> --
> Regards
> Alok Kumar
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the meta-freescale
mailing list