[meta-freescale] Yocto Qt5 Integration for Wandboard - Kernel Panic
Jay Cady
jcady92 at gmail.com
Tue Jan 21 14:06:29 PST 2014
Hey John,
Wow, that is really surprising. I will give that build a try tonight and
see my results.
Do I exclude git by writing the line "DISTRO_FEATURES_remove = "git"" in my
local.conf?
If this solves it, you will be my hero.
Thanks!
Jay
On Tue, Jan 21, 2014 at 4:57 PM, John Weber <rjohnweber at gmail.com> wrote:
> Hi Jay,
>
>
> On 1/19/14 3:21 PM, Jay Cady wrote:
>
> Hi,
>
> I'm trying to integrate Qt5 with Yocto on the Wandboard Dual (i.MX6).
> I've been following these two tutorials:
>
>
> http://wiki.wandboard.org/index.php/Getting_started_with_Yocto_on_Wandboard
>
> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
>
> The problem occurs when I am ready to bitbake the meta-qt5 recipe into
> the core-image-minimal. I add the recommended features to the local.conf
> and remove the x11 and wayland components in order to get the eglfs
> drivers. Then I bitbake core-image-minimal, the bitbake succeeds fine. I
> then run a dd command to write the core-image-minimal-wandboard-dual.sdcard
> to my sdcard.
>
> I was curious so I tried replicating those steps and was able to get it to
> fail on my Wandboard Dual immediately.
>
> There are a LOT of packages added to the image, so I figured that one of
> them was somehow causing the problem. I started binary searching. After 9
> iterations of including/excluding packages from the build, I found that GIT
> of all things was causing the kernel panic. If you exclude git, then you
> get a successful boot.
>
> That is just *weird*. I don't have the time to figure out why this is,
> but I hope that this helps you.
>
> John
>
>
> Finally, upon inserting the sdcard into my wandboard, I boot it up and
> view the output through serial. The boot fails with a "Kernel panic - not
> syncing: No init found.".
>
> Here is the log of the first boot: http://pastebin.com/gr8LpMRU
> And here is the log of when the board is reset:
> http://pastebin.com/eauuw3Q2
>
> Does anyone have any idea why this is happening and how I can fix it?
>
> Thank you!
>
>
> _______________________________________________
> meta-freescale mailing listmeta-freescale at yoctoproject.orghttps://lists.yoctoproject.org/listinfo/meta-freescale
>
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140121/f2e1a497/attachment.html>
More information about the meta-freescale
mailing list