[meta-freescale] 3.10.17-1.0.0_beta meta-fsl-bsp-release layer
Eric Nelson
eric.nelson at boundarydevices.com
Mon Jan 20 19:14:08 PST 2014
Hi Alok,
On 01/20/2014 09:44 AM, Alok Kumar wrote:
> Hi Eric,
>
> I am not sure if I understand it. my apology.
>
No sweat. Over a year in and I'm still figuring things out...
> I am following this
> http://wiki.wandboard.org/index.php/Getting_started_with_Yocto_on_Wandboard
>
> and took stable dora branch.
>
I'd start with Daiane's docs on i.MX Community:
http://layers.openembedded.org/layerindex/branch/master/layer/meta-gnome/
And O.S.Systems that describes how to specifically build for
Nitrogen6x:
http://www.ossystems.com.br/blog/2013/04/15/yocto-with-boundary-devices-nitrogen6x-5-steps-only.html
Make sure you use the "dora" branch instead of "dylan" though.
> Now if I want to try chromium" beta,
> a) should I got to development branch first and get everything from below.
>
> repo init -u
> https://github.com/Freescale/fsl-community-bsp-platform -b master
>
Again, you should stick with "Dora" unless you need something
specific in "master".
> b) apply chromium recipe on this build and build the image.
After the repo sync, you'll need to pull in the meta-browser
layer:
~/yocto/sources$ git clone git://github.com/OSSystems/meta-browser.git
And you'll need to add meta-browser and meta-gnome to your
conf/bblayers.conf file:
BBLAYERS = " \
...
${BSPDIR}/sources/meta-openembedded/meta-gnome \
${BSPDIR}/sources/meta-browser \
...
"
And finally, you'll need to pull it into your build.
The easy way is to add this to your local.conf file:
IMAGE_INSTALL += " \
chromium \
"
I'm not sure why, but when I went through these steps,
I got complaints about the license for libav and
was prompted to add this to local.conf:
LICENSE_FLAGS_WHITELIST = "commercial"
I think there's something screwy with that, though.
The recipes in poky/meta/recipes-multimedia/libav/
appear to have a combination of GPL and LGPL
licenses.
> c) where should I test this on Sabrelite or nitorgen6x ?
>
We recommend the use of "nitrogen6x" for the MACHINE type.
The resulting image will run on either the SABRE Lite
or Nitrogen6X boards.
Regards,
Eric
More information about the meta-freescale
mailing list