[meta-freescale] [PATCH] Added support for the SolidRun HummingBird (also known as Carrier One)
Carlos Rafael Giani
dv at pseudoterminal.org
Tue Jan 7 07:35:18 PST 2014
Signed-off-by: Carlos Rafael Giani <dv at pseudoterminal.org>
---
conf/machine/hummingboard.conf | 21 +
recipes-bsp/u-boot/u-boot-cuboxi/uEnv.txt | 1 +
recipes-bsp/u-boot/u-boot-cuboxi_2013.10.bb | 27 +
...001-SolidRun-i.MX6-based-carrier-one-base.patch | 84 +
.../0002-SolidRun-Carrier-One-board-support.patch | 1331 ++++++++++
.../hummingboard/0003-LVDS-on-LDB_SEP1.patch | 28 +
...04-Added-Carrier-One-C1-to-imx6_defconfig.patch | 25 +
.../linux/linux-imx-3.0.35/hummingboard/defconfig | 2733 ++++++++++++++++++++
.../mxc_hdmi-dont-require-cea-mode.patch | 18 +
recipes-kernel/linux/linux-imx_3.0.35.bbappend | 23 +-
10 files changed, 4290 insertions(+), 1 deletion(-)
create mode 100644 conf/machine/hummingboard.conf
create mode 100644 recipes-bsp/u-boot/u-boot-cuboxi/uEnv.txt
create mode 100644 recipes-bsp/u-boot/u-boot-cuboxi_2013.10.bb
create mode 100644 recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0001-SolidRun-i.MX6-based-carrier-one-base.patch
create mode 100644 recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0002-SolidRun-Carrier-One-board-support.patch
create mode 100644 recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0003-LVDS-on-LDB_SEP1.patch
create mode 100644 recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0004-Added-Carrier-One-C1-to-imx6_defconfig.patch
create mode 100644 recipes-kernel/linux/linux-imx-3.0.35/hummingboard/defconfig
create mode 100644 recipes-kernel/linux/linux-imx-3.0.35/hummingboard/mxc_hdmi-dont-require-cea-mode.patch
diff --git a/conf/machine/hummingboard.conf b/conf/machine/hummingboard.conf
new file mode 100644
index 0000000..0981ee8
--- /dev/null
+++ b/conf/machine/hummingboard.conf
@@ -0,0 +1,21 @@
+require conf/machine/include/imx6sabresd-common.inc
+
+SOC_FAMILY = "mx6:mx6s"
+
+KERNEL_DEVICETREE = "imx6dl-sabresd.dtb"
+
+# Cubox-i and HummingBoard use the same U-Boot fork
+PREFERRED_PROVIDER_u-boot = "u-boot-cuboxi"
+
+PREFERRED_VERSION_linux-imx = "3.0.35"
+PREFERRED_PROVIDER_virtual/kernel = "linux-imx"
+
+UBOOT_MAKE_TARGET = "u-boot.imx"
+UBOOT_SUFFIX = "imx"
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd] = "mx6_c1solo_config,sdcard"
+UBOOT_ENTRYPOINT = "0x10800000"
+
+UENV_FILENAME = "uEnv-cuboxi.txt"
+
+BOOT_SCRIPTS = "${UENV_FILENAME}:uEnv.txt"
diff --git a/recipes-bsp/u-boot/u-boot-cuboxi/uEnv.txt b/recipes-bsp/u-boot/u-boot-cuboxi/uEnv.txt
new file mode 100644
index 0000000..3ae0863
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-cuboxi/uEnv.txt
@@ -0,0 +1 @@
+mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} video=mxcfb0:dev=hdmi,1920x1080M at 60,if=RGB24,bpp=32
diff --git a/recipes-bsp/u-boot/u-boot-cuboxi_2013.10.bb b/recipes-bsp/u-boot/u-boot-cuboxi_2013.10.bb
new file mode 100644
index 0000000..9268327
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-cuboxi_2013.10.bb
@@ -0,0 +1,27 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=bc069111b5e5b1ed8bed98ae73b596ec"
+COMPATIBLE_MACHINE = "hummingboard"
+
+PROVIDES += "u-boot"
+
+SRCREV = "4a7549f9bb0063e5a7446044b3ff59558bea4010"
+
+PV = "v2013.10+git${SRCPV}"
+
+SRC_URI = " \
+ git://github.com/linux4kix/u-boot.git;branch=imx6 \
+ file://uEnv.txt \
+ "
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+deploy_uenv () {
+ install -d ${DEPLOYDIR}
+ install ${WORKDIR}/uEnv.txt ${DEPLOYDIR}/${UENV_FILENAME}
+}
+
+do_deploy[postfuncs] += "deploy_uenv"
diff --git a/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0001-SolidRun-i.MX6-based-carrier-one-base.patch b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0001-SolidRun-i.MX6-based-carrier-one-base.patch
new file mode 100644
index 0000000..016f5a6
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0001-SolidRun-i.MX6-based-carrier-one-base.patch
@@ -0,0 +1,84 @@
+From 54020151feba813f913dc7465606a5dded580fd7 Mon Sep 17 00:00:00 2001
+From: Rabeeh Khoury <rabeeh at solid-run.com>
+Date: Wed, 25 Sep 2013 21:59:47 +0200
+Subject: [PATCH 1/2] SolidRun i.MX6 based carrier one base
+
+The patches adds a new machine with id 4773 to the kernel tree.
+Sets up the Kconfig and Makefile accordingly
+
+Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
+---
+ arch/arm/mach-mx6/Kconfig | 33 +++++++++++++++++++++++++++++++++
+ arch/arm/mach-mx6/Makefile | 1 +
+ arch/arm/tools/mach-types | 1 +
+ 3 files changed, 35 insertions(+)
+
+diff --git a/arch/arm/mach-mx6/Kconfig b/arch/arm/mach-mx6/Kconfig
+index 64ce4d4..144bb24 100644
+--- a/arch/arm/mach-mx6/Kconfig
++++ b/arch/arm/mach-mx6/Kconfig
+@@ -282,6 +282,39 @@ config MACH_MX6Q_HDMIDONGLE
+ Include support for i.MX 6Quad HDMI Dongle platform. This includes specific
+ configurations for the board and its peripherals.
+
++config MACH_C1
++ bool "Support SolidRun i.MX6 Carrier One platform"
++ select ARCH_MX6Q
++ select SOC_IMX6Q
++ select IMX_HAVE_PLATFORM_IMX_UART
++ select IMX_HAVE_PLATFORM_DMA
++ select IMX_HAVE_PLATFORM_FEC
++ select IMX_HAVE_PLATFORM_GPMI_NFC
++ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
++ select IMX_HAVE_PLATFORM_SPI_IMX
++ select IMX_HAVE_PLATFORM_IMX_I2C
++ select IMX_HAVE_PLATFORM_VIV_GPU
++ select IMX_HAVE_PLATFORM_IMX_VPU
++ select IMX_HAVE_PLATFORM_IMX_SSI
++ select IMX_HAVE_PLATFORM_IMX_ANATOP_THERMAL
++ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
++ select IMX_HAVE_PLATFORM_MXC_EHCI
++ select IMX_HAVE_PLATFORM_FSL_OTG
++ select IMX_HAVE_PLATFORM_FSL_USB_WAKEUP
++ select IMX_HAVE_PLATFORM_AHCI
++ select IMX_HAVE_PLATFORM_IMX_OCOTP
++ select IMX_HAVE_PLATFORM_IMX_VIIM
++ select IMX_HAVE_PLATFORM_IMX2_WDT
++ select IMX_HAVE_PLATFORM_IMX_PM
++ select IMX_HAVE_PLATFORM_MXC_HDMI
++ select IMX_HAVE_PLATFORM_IMX_ASRC
++ select IMX_HAVE_PLATFORM_FLEXCAN
++ select IMX_HAVE_PLATFORM_IMX_PCIE
++ select IMX_HAVE_PLATFORM_IMX_CAAM
++ help
++ Include support for SolidRun i.MX6 based Carrier One board
++
++
+ comment "MX6 Options:"
+
+ config IMX_PCIE
+diff --git a/arch/arm/mach-mx6/Makefile b/arch/arm/mach-mx6/Makefile
+index 8c1d754..793668e 100644
+--- a/arch/arm/mach-mx6/Makefile
++++ b/arch/arm/mach-mx6/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MACH_MX6SL_ARM2) += board-mx6sl_arm2.o mx6sl_arm2_pmic_pfuze100.o
+ obj-$(CONFIG_MACH_MX6SL_EVK) += board-mx6sl_evk.o mx6sl_evk_pmic_pfuze100.o
+ obj-$(CONFIG_MACH_MX6Q_SABRELITE) += board-mx6q_sabrelite.o
+ obj-$(CONFIG_MACH_MX6Q_SABRESD) += board-mx6q_sabresd.o mx6q_sabresd_pmic_pfuze100.o
++obj-$(CONFIG_MACH_C1) += board-mx6q_c1.o
+ obj-$(CONFIG_MACH_MX6Q_SABREAUTO) += board-mx6q_sabreauto.o mx6q_sabreauto_pmic_pfuze100.o
+ obj-$(CONFIG_MACH_MX6Q_HDMIDONGLE) += board-mx6q_hdmidongle.o
+ obj-$(CONFIG_SMP) += plat_hotplug.o platsmp.o headsmp.o
+diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
+index f6b5c0e..45eac57 100644
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -1120,4 +1120,5 @@ mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837
+ mx6sl_arm2 MACH_MX6SL_ARM2 MX6SL_ARM2 4091
+ mx6q_hdmidongle MACH_MX6Q_HDMIDONGLE MX6Q_HDMIDONGLE 4284
+ mx6sl_evk MACH_MX6SL_EVK MX6SL_EVK 4307
++c1 MACH_C1 C1 4773
+
+--
+1.7.9.5
+
diff --git a/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0002-SolidRun-Carrier-One-board-support.patch b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0002-SolidRun-Carrier-One-board-support.patch
new file mode 100644
index 0000000..496a256
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0002-SolidRun-Carrier-One-board-support.patch
@@ -0,0 +1,1331 @@
+From 8fde224da458dee8011a77bef483f8621bae4ce4 Mon Sep 17 00:00:00 2001
+From: Rabeeh Khoury <rabeeh at solid-run.com>
+Date: Wed, 25 Sep 2013 22:01:25 +0200
+Subject: [PATCH 2/2] SolidRun Carrier One board support
+
+Initial board support; includes -
+1. HDMI
+2. AR8035 Ethernet phy
+3. UART
+4. LVDS
+5. USB
+
+This is an initial support for the board; there are other features that are missing.
+
+Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
+---
+ arch/arm/mach-mx6/board-mx6dl_c1.h | 249 +++++++++++
+ arch/arm/mach-mx6/board-mx6q_c1.c | 867 ++++++++++++++++++++++++++++++++++++
+ arch/arm/mach-mx6/board-mx6q_c1.h | 170 +++++++
+ 3 files changed, 1286 insertions(+)
+ create mode 100644 arch/arm/mach-mx6/board-mx6dl_c1.h
+ create mode 100644 arch/arm/mach-mx6/board-mx6q_c1.c
+ create mode 100644 arch/arm/mach-mx6/board-mx6q_c1.h
+
+diff --git a/arch/arm/mach-mx6/board-mx6dl_c1.h b/arch/arm/mach-mx6/board-mx6dl_c1.h
+new file mode 100644
+index 0000000..31f0921
+--- /dev/null
++++ b/arch/arm/mach-mx6/board-mx6dl_c1.h
+@@ -0,0 +1,249 @@
++/*
++ * Copyright (C) 2013 SolidRun ltd.
++ * Based on sabresd board from Freescale Semiconductor, Inc. All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#ifndef _BOARD_MX6DL_SABRESD_H
++#define _BOARD_MX6DL_SABRESD_H
++#include <mach/iomux-mx6dl.h>
++#define MX6DL_ENET_PAD_CTRL_PD (PAD_CTL_PKE | PAD_CTL_PUE | \
++ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
++ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
++
++static iomux_v3_cfg_t mx6dl_c1_pads[] = {
++ /* WiFi 11n and BlueTooth */
++ MX6DL_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT,
++ MX6DL_PAD_DISP0_DAT23__GPIO_5_17, /* WL_RST_IN */
++ MX6DL_PAD_DISP0_DAT10__GPIO_4_31, /* WL_GPIO_0 */
++ MX6DL_PAD_DISP0_DAT18__GPIO_5_12, /* WL_GPIO_1 */
++ MX6DL_PAD_EIM_D19__GPIO_3_19, /* WL_BT_REG_ON */
++ MX6DL_PAD_DISP0_DAT19__GPIO_5_13, /* XTAL power up */
++ MX6DL_PAD_NANDF_CS3__GPIO_6_16, /* BT_RST_N */
++ MX6DL_PAD_NANDF_ALE__GPIO_6_8, /* BT_GPIO_0 */
++ MX6DL_PAD_NANDF_CLE__GPIO_6_7, /* BT_GPIO_1 */
++
++ /* AUD5 for BRCM WiFi/BT/FM */
++ MX6DL_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
++ MX6DL_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
++ MX6DL_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
++ MX6DL_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
++
++ /* USDHC1 - Connected to BRCM Wifi/BT/FM */
++ MX6DL_PAD_SD1_CLK__USDHC1_CLK_50MHZ_40OHM,
++ MX6DL_PAD_SD1_CMD__USDHC1_CMD_50MHZ_40OHM,
++ MX6DL_PAD_SD1_DAT0__USDHC1_DAT0_50MHZ_40OHM,
++ MX6DL_PAD_SD1_DAT1__USDHC1_DAT1_50MHZ_40OHM,
++ MX6DL_PAD_SD1_DAT2__USDHC1_DAT2_50MHZ_40OHM,
++ MX6DL_PAD_SD1_DAT3__USDHC1_DAT3_50MHZ_40OHM,
++
++ /* UART4 for BRCM WiFi/BT/FM */
++ MX6DL_PAD_CSI0_DAT12__UART4_TXD,
++ MX6DL_PAD_CSI0_DAT13__UART4_RXD,
++ MX6DL_PAD_CSI0_DAT17__UART4_CTS,
++ MX6DL_PAD_CSI0_DAT16__UART4_RTS,
++
++ /* SPDIF out */
++ MX6DL_PAD_GPIO_17__SPDIF_OUT1,
++ /* CAN1 */
++ MX6DL_PAD_KEY_ROW2__CAN1_RXCAN,
++ MX6DL_PAD_GPIO_7__CAN1_TXCAN,
++
++ /* CCM */
++ MX6DL_PAD_GPIO_5__CCM_CLKO, /* SGTL500 sys_mclk */
++ MX6DL_PAD_NANDF_CS2__CCM_CLKO2, /* MIPI CSI clock */
++
++ /* ECSPI2 */
++ MX6DL_PAD_EIM_CS0__ECSPI2_SCLK,
++ MX6DL_PAD_EIM_CS1__ECSPI2_MOSI,
++ MX6DL_PAD_EIM_OE__ECSPI2_MISO,
++ MX6DL_PAD_EIM_RW__ECSPI2_SS0,
++ MX6DL_PAD_EIM_LBA__ECSPI2_SS1,
++
++ /* I2C1 */
++ MX6DL_PAD_EIM_D21__I2C1_SCL,
++ MX6DL_PAD_EIM_D28__I2C1_SDA,
++
++ /* I2C2 */
++ MX6DL_PAD_KEY_COL3__I2C2_SCL,
++ MX6DL_PAD_KEY_ROW3__I2C2_SDA,
++
++ /* I2C3 */
++ MX6DL_PAD_EIM_D17__I2C3_SCL,
++ MX6DL_PAD_EIM_D18__I2C3_SDA,
++
++ /* PWM */
++ MX6DL_PAD_DISP0_DAT8__PWM1_PWMO,
++ MX6DL_PAD_DISP0_DAT9__PWM2_PWMO,
++ MX6DL_PAD_SD4_DAT1__PWM3_PWMO,
++ MX6DL_PAD_SD4_DAT2__PWM4_PWMO,
++
++ /* UART1 for debug */
++ MX6DL_PAD_CSI0_DAT10__UART1_TXD,
++ MX6DL_PAD_CSI0_DAT11__UART1_RXD,
++
++ /* UART2 RX, TX, CTS and RTS */
++ MX6DL_PAD_SD4_DAT4__UART2_RXD,
++ MX6DL_PAD_SD4_DAT5__UART2_RTS,
++ MX6DL_PAD_SD4_DAT6__UART2_CTS,
++ MX6DL_PAD_SD4_DAT7__UART2_TXD,
++
++ /* USBOTG ID pin */
++ IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, PAD_CTL_PKE | PAD_CTL_PUE | \
++ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_LOW | \
++ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS),
++ /*
++ * Originally MX6Q_PAD_GPIO_1__USBOTG_ID, but we want it to be
++ * pulled down ID pin for fixed host connection.
++ */
++
++ /* USB power enable pins */
++ MX6DL_PAD_EIM_D22__GPIO_3_22,
++ MX6DL_PAD_GPIO_0__GPIO_1_0,
++
++ /* USB OC pin */
++ MX6DL_PAD_KEY_COL4__USBOH3_USBOTG_OC,
++ MX6DL_PAD_GPIO_3__USBOH3_USBH1_OC,
++
++ /* USDHC2 */
++ MX6DL_PAD_SD2_CLK__USDHC2_CLK,
++ MX6DL_PAD_SD2_CMD__USDHC2_CMD,
++ MX6DL_PAD_SD2_DAT0__USDHC2_DAT0,
++ MX6DL_PAD_SD2_DAT1__USDHC2_DAT1,
++ MX6DL_PAD_SD2_DAT2__USDHC2_DAT2,
++ MX6DL_PAD_SD2_DAT3__USDHC2_DAT3,
++ MX6DL_PAD_GPIO_4__USDHC2_CD, /* SD2_CD */
++ MX6DL_PAD_GPIO_2__USDHC2_WP, /* SD2_WP */
++
++ /* USDHC3 */
++ MX6Q_PAD_SD3_CLK__USDHC3_CLK_50MHZ,
++ MX6DL_PAD_SD3_CMD__USDHC3_CMD_50MHZ,
++ MX6DL_PAD_SD3_DAT0__USDHC3_DAT0_50MHZ,
++ MX6DL_PAD_SD3_DAT1__USDHC3_DAT1_50MHZ,
++ MX6DL_PAD_SD3_DAT2__USDHC3_DAT2_50MHZ,
++ MX6DL_PAD_SD3_DAT3__USDHC3_DAT3_50MHZ,
++ MX6DL_PAD_SD3_DAT4__USDHC3_DAT4_50MHZ,
++ MX6DL_PAD_SD3_DAT5__USDHC3_DAT5_50MHZ,
++ MX6DL_PAD_SD3_DAT6__USDHC3_DAT6_50MHZ,
++ MX6DL_PAD_SD3_DAT7__USDHC3_DAT7_50MHZ,
++// TODO - FIXME? MX6Q_PAD_NANDF_D0__GPIO_2_0, /* SD3_CD */
++// MX6Q_PAD_NANDF_D1__GPIO_2_1, /* SD3_WP */
++ MX6DL_PAD_SD3_RST__USDHC3_RST, /* SD3_RST */
++ MX6DL_PAD_GPIO_18__USDHC3_VSELECT, /* SD3_VSELECT */
++
++ /* USDHC4 */
++ MX6DL_PAD_SD4_CLK__USDHC4_CLK_50MHZ,
++ MX6DL_PAD_SD4_CMD__USDHC4_CMD_50MHZ,
++ MX6DL_PAD_SD4_DAT0__USDHC4_DAT0_50MHZ,
++ MX6DL_PAD_SD4_DAT1__USDHC4_DAT1_50MHZ,
++ MX6DL_PAD_SD4_DAT2__USDHC4_DAT2_50MHZ,
++ MX6DL_PAD_SD4_DAT3__USDHC4_DAT3_50MHZ,
++ MX6DL_PAD_SD4_DAT4__USDHC4_DAT4_50MHZ,
++ MX6DL_PAD_SD4_DAT5__USDHC4_DAT5_50MHZ,
++ MX6DL_PAD_SD4_DAT6__USDHC4_DAT6_50MHZ,
++ MX6DL_PAD_SD4_DAT7__USDHC4_DAT7_50MHZ,
++
++ /* IR in */
++ MX6DL_PAD_GPIO_2__GPIO_1_2,
++ /* MX6DL_PAD_EIM_DA9__GPIO_3_9 on CuBox-i */
++};
++
++static iomux_v3_cfg_t mx6dl_ar8030_phy[] = {
++ /* ENET */
++ MX6DL_PAD_ENET_MDIO__ENET_MDIO,
++ MX6DL_PAD_ENET_MDC__ENET_MDC,
++ IOMUX_PAD(0x0650, 0x0268, 5, 0x0000, 0, MX6DL_ENET_PAD_CTRL_PD), /* KEY_ROW4 reset signal */
++
++ MX6DL_PAD_DI0_PIN2__GPIO_4_18, /* Interrupt */
++ /* RMII */
++ IOMUX_PAD(0x05B4, 0x01E4, 1, 0x0828, 0, PAD_CTL_PKE | PAD_CTL_PUE |
++ PAD_CTL_PUS_100K_DOWN), /* MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN */
++ IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0818, 0, PAD_CTL_PKE | PAD_CTL_PUE |
++ PAD_CTL_PUS_100K_DOWN), /* MX6DL_PAD_ENET_RXD0__ENET_RDATA_0 */
++ IOMUX_PAD(0x05CC, 0x01FC, 1, 0x081C, 0, PAD_CTL_PKE | PAD_CTL_PUE |
++ PAD_CTL_PUS_100K_DOWN), /* MX6DL_PAD_ENET_RXD1__ENET_RDATA_1 */
++ MX6DL_PAD_ENET_TXD0__ENET_TDATA_0,
++ MX6DL_PAD_ENET_TXD1__ENET_TDATA_1,
++ MX6DL_PAD_ENET_TX_EN__ENET_TX_EN,
++ MX6DL_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT,
++
++// MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC, This is dangerous once since it's input in AR8030 and output in AR8035
++ MX6DL_PAD_RGMII_TXC__GPIO_6_19,
++ MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0,
++ MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1,
++ MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2,
++ MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3,
++ MX6DL_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL,
++ MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK,
++ MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC,
++ IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RD0*/
++ IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RD1*/
++ /* In RGMII mode RD2 should be '1' to disable the stupid PLL OFF mode */
++ IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RD2*/
++ IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RD3*/
++ /* In RGMII mode RX_DV should be pulled down for reset strap */
++ IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RXCTL*/
++ /* PCI-E Reset */
++ MX6DL_PAD_EIM_DA9__GPIO_3_9,
++};
++static iomux_v3_cfg_t mx6dl_ar8035_phy[] = {
++ /* ENET */
++ MX6DL_PAD_ENET_MDIO__ENET_MDIO,
++ MX6DL_PAD_ENET_MDC__ENET_MDC,
++ IOMUX_PAD(0x0650, 0x0268, 5, 0x0000, 0, MX6DL_ENET_PAD_CTRL_PD), /* KEY_ROW4 reset signal */
++
++ MX6DL_PAD_DI0_PIN2__GPIO_4_18, /* Interrupt */
++ /* RMII */
++ IOMUX_PAD(0x05B4, 0x01E4, 1, 0x0828, 0, PAD_CTL_PKE | PAD_CTL_PUE |
++ PAD_CTL_PUS_100K_DOWN), /* MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN */
++ IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0818, 0, PAD_CTL_PKE | PAD_CTL_PUE |
++ PAD_CTL_PUS_100K_DOWN), /* MX6DL_PAD_ENET_RXD0__ENET_RDATA_0 */
++ IOMUX_PAD(0x05CC, 0x01FC, 1, 0x081C, 0, PAD_CTL_PKE | PAD_CTL_PUE |
++ PAD_CTL_PUS_100K_DOWN), /* MX6DL_PAD_ENET_RXD1__ENET_RDATA_1 */
++ MX6DL_PAD_ENET_TXD0__ENET_TDATA_0,
++ MX6DL_PAD_ENET_TXD1__ENET_TDATA_1,
++ MX6DL_PAD_ENET_TX_EN__ENET_TX_EN,
++ MX6DL_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT,
++
++ MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC,
++ MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0,
++ MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1,
++ MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2,
++ MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3,
++ MX6DL_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL,
++ MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK,
++ MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC,
++ IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RD0*/
++ IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RD1*/
++ /* In RGMII mode RD2 should be '1' to disable the PLL OFF mode */
++ MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2,
++ MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3,
++ /* In RGMII mode RX_DV should be pulled down for reset strap */
++ IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, MX6DL_ENET_PAD_CTRL_PD),/*RGMII RXCTL*/
++};
++
++
++static iomux_v3_cfg_t mx6dl_c1_hdmi_ddc_pads[] = {
++ MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL, /* HDMI DDC SCL */
++ MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA, /* HDMI DDC SDA */
++};
++
++static iomux_v3_cfg_t mx6dl_c1_i2c2_pads[] = {
++ MX6DL_PAD_KEY_COL3__I2C2_SCL, /* I2C2 SCL */
++ MX6DL_PAD_KEY_ROW3__I2C2_SDA, /* I2C2 SDA */
++};
++
++#endif
+diff --git a/arch/arm/mach-mx6/board-mx6q_c1.c b/arch/arm/mach-mx6/board-mx6q_c1.c
+new file mode 100644
+index 0000000..ebbf8b8
+--- /dev/null
++++ b/arch/arm/mach-mx6/board-mx6q_c1.c
+@@ -0,0 +1,867 @@
++/*
++ * Copyright (C) 2013 SolidRun ltd.
++ * Based on sabresd board from Freescale Semiconductor, Inc. All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/pm.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/nodemask.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/fsl_devices.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/i2c.h>
++#include <linux/i2c/pca953x.h>
++#include <linux/ata.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/regulator/consumer.h>
++#include <linux/pmic_external.h>
++#include <linux/pmic_status.h>
++#include <linux/ipu.h>
++#include <linux/mxcfb.h>
++#include <linux/pwm_backlight.h>
++#include <linux/fec.h>
++#include <linux/memblock.h>
++#include <linux/gpio.h>
++#include <linux/etherdevice.h>
++#include <linux/regulator/anatop-regulator.h>
++#include <linux/regulator/consumer.h>
++#include <linux/regulator/machine.h>
++#include <linux/regulator/fixed.h>
++#include <linux/mfd/mxc-hdmi-core.h>
++#ifdef CONFIG_IR_GPIO_CIR
++#include <media/gpio-ir-recv.h>
++#endif
++
++#include <mach/common.h>
++#include <mach/hardware.h>
++#include <mach/mxc_dvfs.h>
++#include <mach/memory.h>
++#include <mach/iomux-mx6q.h>
++#include <mach/imx-uart.h>
++#include <mach/viv_gpu.h>
++#include <mach/ahci_sata.h>
++#include <mach/ipu-v3.h>
++#include <mach/mxc_hdmi.h>
++#include <mach/mxc_asrc.h>
++#include <mach/mipi_dsi.h>
++
++#include <asm/irq.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/time.h>
++
++#include "usb.h"
++#include "devices-imx6q.h"
++#include "crm_regs.h"
++#include "cpu_op-mx6.h"
++#include "board-mx6q_c1.h"
++#include "board-mx6dl_c1.h"
++
++#define USOM_WL_RST IMX_GPIO_NR(5, 17)
++#define USOM_BT_RST IMX_GPIO_NR(6, 16)
++#define USOM_REG_ON IMX_GPIO_NR(3, 19)
++#define USOM_XTAL_ON IMX_GPIO_NR(5, 13)
++#define USOM_SD2_CD IMX_GPIO_NR(1, 4)
++#define GPIO_IR_IN IMX_GPIO_NR(1, 2) /* IMX_GPIO_NR(3, 9) for CuBox-i */
++#define USOM_USB_OTG_PWR IMX_GPIO_NR(3, 22)
++#define USOM_USB_H1_PWR IMX_GPIO_NR(1, 0)
++#define USOM_ENET_RST IMX_GPIO_NR(4, 15)
++#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO
++#define MX6_ENET_IRQ IMX_GPIO_NR(4, 18) /* TODO */
++#endif
++
++static struct clk *sata_clk;
++static struct clk *clko;
++static int caam_enabled;
++
++extern char *gp_reg_id;
++extern char *soc_reg_id;
++extern char *pu_reg_id;
++
++static const struct esdhc_platform_data mx6q_c1_sd2_data __initconst = {
++ .cd_gpio = USOM_SD2_CD,
++ .keep_power_at_suspend = 1,
++ .support_8bit = 0,
++ .delay_line = 0,
++ .cd_type = ESDHC_CD_GPIO,
++};
++
++static const struct esdhc_platform_data mx6q_c1_sd1_data __initconst = {
++ .cd_gpio = -EINVAL,
++ .wp_gpio = -EINVAL,
++ .always_present = 1,
++ .keep_power_at_suspend = 1,
++ .support_8bit = 0,
++ .delay_line = 0,
++ .cd_type = ESDHC_CD_PERMANENT,
++};
++
++static const struct anatop_thermal_platform_data
++ mx6q_c1_anatop_thermal_data __initconst = {
++ .name = "anatop_thermal",
++};
++
++static int mx6q_c1_fec_ar8035_phy_init(struct phy_device *phydev)
++{
++ unsigned short val;
++ /* Ar803x phy SmartEEE feature cause link status generates glitch,
++ * which cause ethernet link down/up issue, so disable SmartEEE
++ */
++ gpio_set_value(USOM_ENET_RST, 1);
++ mdelay(10);
++ phy_write(phydev, 0xd, 0x3);
++ phy_write(phydev, 0xe, 0x805d);
++ phy_write(phydev, 0xd, 0x4003);
++ val = phy_read(phydev, 0xe);
++ val &= ~(0x1 << 8);
++ phy_write(phydev, 0xe, val);
++ /* To enable AR8035 ouput a 125MHz clk from CLK_25M */
++ phy_write(phydev, 0xd, 0x7);
++ phy_write(phydev, 0xe, 0x8016);
++ phy_write(phydev, 0xd, 0x4007);
++ val = phy_read(phydev, 0xe);
++
++ val &= 0xffe3;
++ val |= 0x18;
++ phy_write(phydev, 0xe, val);
++ /* Introduce tx clock delay */
++ phy_write(phydev, 0x1d, 0x5);
++ val = phy_read(phydev, 0x1e);
++ val |= 0x0100;
++ phy_write(phydev, 0x1e, val);
++ /*check phy power*/
++ val = phy_read(phydev, 0x0);
++
++ if (val & BMCR_PDOWN)
++ phy_write(phydev, 0x0, (val & ~BMCR_PDOWN));
++
++ return 0;
++}
++static int mx6q_c1_fec_ar8030_phy_init(struct phy_device *phydev)
++{
++ unsigned short val;
++ /* Ar803x phy SmartEEE feature cause link status generates glitch,
++ * which cause ethernet link down/up issue, so disable SmartEEE
++ */
++ gpio_set_value(USOM_ENET_RST, 1);
++ mdelay(10);
++ phy_write(phydev, 0xd, 0x3);
++ phy_write(phydev, 0xe, 0x805d);
++ phy_write(phydev, 0xd, 0x4003);
++ val = phy_read(phydev, 0xe);
++ val &= ~(0x1 << 8);
++ phy_write(phydev, 0xe, val);
++ if (val & BMCR_PDOWN)
++ phy_write(phydev, 0x0, (val & ~BMCR_PDOWN));
++
++ return 0;
++}
++
++static struct fec_platform_data fec_data_rgmii __initdata = {
++ .init = mx6q_c1_fec_ar8035_phy_init,
++ .phy = PHY_INTERFACE_MODE_RGMII,
++#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO
++ .gpio_irq = MX6_ENET_IRQ,
++#endif
++};
++static struct fec_platform_data fec_data_rmii __initdata = {
++ .init = mx6q_c1_fec_ar8030_phy_init,
++ .phy = PHY_INTERFACE_MODE_RMII,
++#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO
++ .gpio_irq = MX6_ENET_IRQ,
++#endif
++};
++
++static struct imxi2c_platform_data mx6q_c1_i2c_data = {
++ .bitrate = 100000,
++};
++
++/* I2C1 */
++static struct i2c_board_info mxc_i2c0_board_info[] __initdata = {
++ {
++ I2C_BOARD_INFO("pcf8523", 0x68),
++ },
++};
++
++/* I2C2 / HDMI DDC */
++static struct i2c_board_info mxc_i2c1_board_info[] __initdata = {
++ {
++ I2C_BOARD_INFO("mxc_hdmi_i2c", 0x50),
++ },
++};
++
++/* I2C3 */
++static struct i2c_board_info mxc_i2c2_board_info[] __initdata = {
++};
++
++static void imx6q_c1_usbotg_vbus(bool on)
++{
++ if (on)
++ gpio_set_value(USOM_USB_OTG_PWR, 1);
++ else
++ gpio_set_value(USOM_USB_OTG_PWR, 0);
++}
++
++static void imx6q_c1_host1_vbus(bool on)
++{
++ if (on)
++ gpio_set_value(USOM_USB_H1_PWR, 1);
++ else
++ gpio_set_value(USOM_USB_H1_PWR, 0);
++}
++
++static void __init imx6q_c1_init_usb(void)
++{
++ int ret = 0;
++ imx_otg_base = MX6_IO_ADDRESS(MX6Q_USB_OTG_BASE_ADDR);
++ /* disable external charger detect,
++ * or it will affect signal quality at dp .
++ */
++ ret = gpio_request(USOM_USB_OTG_PWR, "usb-pwr");
++ if (ret) {
++ pr_err("failed to get GPIO USOM_USB_OTG_PWR: %d\n",
++ ret);
++ return;
++ }
++ gpio_direction_output(USOM_USB_OTG_PWR, 0);
++ /* keep USB host1 VBUS always on */
++ ret = gpio_request(USOM_USB_H1_PWR, "usb-h1-pwr");
++ if (ret) {
++ pr_err("failed to get GPIO USOM_USB_H1_PWR: %d\n",
++ ret);
++ return;
++ }
++ gpio_direction_output(USOM_USB_H1_PWR, 0);
++ /*
++ * ID pin is sampled from GPIO_1. Notice that this pad is configured
++ * to be pulled-down 100kOhm by default.
++ */
++ mxc_iomux_set_gpr_register(1, 13, 1, 1);
++
++ mx6_set_otghost_vbus_func(imx6q_c1_usbotg_vbus);
++ mx6_set_host1_vbus_func(imx6q_c1_host1_vbus);
++}
++
++/* HW Initialization, if return 0, initialization is successful. */
++static int mx6q_c1_sata_init(struct device *dev, void __iomem *addr)
++{
++ u32 tmpdata;
++ int ret = 0;
++ struct clk *clk;
++
++ sata_clk = clk_get(dev, "imx_sata_clk");
++ if (IS_ERR(sata_clk)) {
++ dev_err(dev, "no sata clock.\n");
++ return PTR_ERR(sata_clk);
++ }
++ ret = clk_enable(sata_clk);
++ if (ret) {
++ dev_err(dev, "can't enable sata clock.\n");
++ goto put_sata_clk;
++ }
++
++ /* Set PHY Paremeters, two steps to configure the GPR13,
++ * one write for rest of parameters, mask of first write is 0x07FFFFFD,
++ * and the other one write for setting the mpll_clk_off_b
++ *.rx_eq_val_0(iomuxc_gpr13[26:24]),
++ *.los_lvl(iomuxc_gpr13[23:19]),
++ *.rx_dpll_mode_0(iomuxc_gpr13[18:16]),
++ *.sata_speed(iomuxc_gpr13[15]),
++ *.mpll_ss_en(iomuxc_gpr13[14]),
++ *.tx_atten_0(iomuxc_gpr13[13:11]),
++ *.tx_boost_0(iomuxc_gpr13[10:7]),
++ *.tx_lvl(iomuxc_gpr13[6:2]),
++ *.mpll_ck_off(iomuxc_gpr13[1]),
++ *.tx_edgerate_0(iomuxc_gpr13[0]),
++ */
++ tmpdata = readl(IOMUXC_GPR13);
++ writel(((tmpdata & ~0x07FFFFFD) | 0x0593A044), IOMUXC_GPR13);
++
++ /* enable SATA_PHY PLL */
++ tmpdata = readl(IOMUXC_GPR13);
++ writel(((tmpdata & ~0x2) | 0x2), IOMUXC_GPR13);
++
++ /* Get the AHB clock rate, and configure the TIMER1MS reg later */
++ clk = clk_get(NULL, "ahb");
++ if (IS_ERR(clk)) {
++ dev_err(dev, "no ahb clock.\n");
++ ret = PTR_ERR(clk);
++ goto release_sata_clk;
++ }
++ tmpdata = clk_get_rate(clk) / 1000;
++ clk_put(clk);
++
++#ifdef CONFIG_SATA_AHCI_PLATFORM
++ ret = sata_init(addr, tmpdata);
++ if (ret == 0)
++ return ret;
++#else
++ usleep_range(1000, 2000);
++ /* AHCI PHY enter into PDDQ mode if the AHCI module is not enabled */
++ tmpdata = readl(addr + PORT_PHY_CTL);
++ writel(tmpdata | PORT_PHY_CTL_PDDQ_LOC, addr + PORT_PHY_CTL);
++ pr_info("No AHCI save PWR: PDDQ %s\n", ((readl(addr + PORT_PHY_CTL)
++ >> 20) & 1) ? "enabled" : "disabled");
++#endif
++
++release_sata_clk:
++ /* disable SATA_PHY PLL */
++ writel((readl(IOMUXC_GPR13) & ~0x2), IOMUXC_GPR13);
++ clk_disable(sata_clk);
++put_sata_clk:
++ clk_put(sata_clk);
++
++ return ret;
++}
++
++#ifdef CONFIG_SATA_AHCI_PLATFORM
++static void mx6q_c1_sata_exit(struct device *dev)
++{
++ clk_disable(sata_clk);
++ clk_put(sata_clk);
++}
++
++static struct ahci_platform_data mx6q_c1_sata_data = {
++ .init = mx6q_c1_sata_init,
++ .exit = mx6q_c1_sata_exit,
++};
++#endif
++
++static struct viv_gpu_platform_data imx6q_gpu_pdata __initdata = {
++ .reserved_mem_size = SZ_128M,
++};
++
++static struct imx_asrc_platform_data imx_asrc_data = {
++ .channel_bits = 4,
++ .clk_map_ver = 2,
++};
++
++static struct ipuv3_fb_platform_data c1_fb_data[] = {
++ { /*fb0*/
++ .disp_dev = "ldb",
++ .interface_pix_fmt = IPU_PIX_FMT_RGB666,
++ .mode_str = "LDB-XGA",
++ .default_bpp = 16,
++ .int_clk = false,
++ .late_init = false,
++ }, {
++ .disp_dev = "ldb",
++ .interface_pix_fmt = IPU_PIX_FMT_RGB666,
++ .mode_str = "LDB-XGA",
++ .default_bpp = 16,
++ .int_clk = false,
++ }, {
++ .disp_dev = "lcd",
++ .interface_pix_fmt = IPU_PIX_FMT_RGB565,
++ .mode_str = "CLAA-WVGA",
++ .default_bpp = 16,
++ .int_clk = false,
++ .late_init = false,
++ }, {
++ .disp_dev = "ldb",
++ .interface_pix_fmt = IPU_PIX_FMT_RGB666,
++ .mode_str = "LDB-VGA",
++ .default_bpp = 16,
++ .int_clk = false,
++ .late_init = false,
++ },
++};
++
++static void hdmi_init(int ipu_id, int disp_id)
++{
++ int hdmi_mux_setting;
++
++ if ((ipu_id > 1) || (ipu_id < 0)) {
++ pr_err("Invalid IPU select for HDMI: %d. Set to 0\n", ipu_id);
++ ipu_id = 0;
++ }
++
++ if ((disp_id > 1) || (disp_id < 0)) {
++ pr_err("Invalid DI select for HDMI: %d. Set to 0\n", disp_id);
++ disp_id = 0;
++ }
++
++ /* Configure the connection between IPU1/2 and HDMI */
++ hdmi_mux_setting = 2*ipu_id + disp_id;
++
++ /* GPR3, bits 2-3 = HDMI_MUX_CTL */
++ mxc_iomux_set_gpr_register(3, 2, 2, hdmi_mux_setting);
++
++ /* Set HDMI event as SDMA event2 while Chip version later than TO1.2 */
++ if (hdmi_SDMA_check())
++ mxc_iomux_set_gpr_register(0, 0, 1, 1);
++}
++
++/* On mx6x c1 board i2c2 iomux with hdmi ddc,
++ * the pins default work at i2c2 function,
++ when hdcp enable, the pins should work at ddc function */
++
++static void hdmi_enable_ddc_pin(void)
++{
++ if (cpu_is_mx6dl())
++ mxc_iomux_v3_setup_multiple_pads(mx6dl_c1_hdmi_ddc_pads,
++ ARRAY_SIZE(mx6dl_c1_hdmi_ddc_pads));
++ else
++ mxc_iomux_v3_setup_multiple_pads(mx6q_c1_hdmi_ddc_pads,
++ ARRAY_SIZE(mx6q_c1_hdmi_ddc_pads));
++}
++
++static void hdmi_disable_ddc_pin(void)
++{
++ if (cpu_is_mx6dl())
++ mxc_iomux_v3_setup_multiple_pads(mx6dl_c1_i2c2_pads,
++ ARRAY_SIZE(mx6dl_c1_i2c2_pads));
++ else
++ mxc_iomux_v3_setup_multiple_pads(mx6q_c1_i2c2_pads,
++ ARRAY_SIZE(mx6q_c1_i2c2_pads));
++}
++
++static struct fsl_mxc_hdmi_platform_data hdmi_data = {
++ .init = hdmi_init,
++ .enable_pins = hdmi_enable_ddc_pin,
++ .disable_pins = hdmi_disable_ddc_pin,
++};
++
++static struct fsl_mxc_hdmi_core_platform_data hdmi_core_data = {
++ .ipu_id = 0,
++ .disp_id = 0,
++};
++
++static struct fsl_mxc_ldb_platform_data ldb_data = {
++ .ipu_id = 1,
++ .disp_id = 1,
++ .ext_ref = 1,
++ .mode = LDB_SEP0,
++ .sec_ipu_id = 1,
++ .sec_disp_id = 0,
++};
++
++static struct imx_ipuv3_platform_data ipu_data[] = {
++ {
++ .rev = 4,
++ .csi_clk[0] = "clko_clk",
++ .bypass_reset = false,
++ }, {
++ .rev = 4,
++ .csi_clk[0] = "clko_clk",
++ .bypass_reset = false,
++ },
++};
++
++static int spdif_clk_set_rate(struct clk *clk, unsigned long rate)
++{
++ unsigned long rate_actual;
++ rate_actual = clk_round_rate(clk, rate);
++ printk ("Called to set rate %s, rate = %ld, actual = %ld\n",__FUNCTION__,rate,rate_actual);
++ clk_set_rate(clk, rate_actual);
++ return 0;
++}
++
++static struct mxc_spdif_platform_data mxc_spdif_data = {
++ .spdif_tx = 1, /* enable tx */
++ .spdif_rx = 0, /* enable rx */
++ /*
++ * spdif0_clk will be 454.7MHz divided by ccm dividers.
++ *
++ * 44.1KHz: 454.7MHz / 7 (ccm) / 23 (spdif) = 44,128 Hz ~ 0.06% error
++ * 48KHz: 454.7MHz / 4 (ccm) / 37 (spdif) = 48,004 Hz ~ 0.01% error
++ * 32KHz: 454.7MHz / 6 (ccm) / 37 (spdif) = 32,003 Hz ~ 0.01% error
++ */
++ .spdif_clk_44100 = 1, /* tx clk from spdif0_clk_root */
++ .spdif_clk_48000 = 1, /* tx clk from spdif0_clk_root */
++ .spdif_div_44100 = 23,
++ .spdif_div_48000 = 37,
++ .spdif_div_32000 = 37,
++ .spdif_clk_set_rate = spdif_clk_set_rate,
++ .spdif_clk = NULL, /* spdif bus clk */
++};
++
++static struct fsl_mxc_capture_platform_data capture_data[] = {
++ {
++ .csi = 0,
++ .ipu = 0,
++ .mclk_source = 0,
++ .is_mipi = 0,
++ }, {
++ .csi = 1,
++ .ipu = 0,
++ .mclk_source = 0,
++ .is_mipi = 1,
++ },
++};
++
++static struct imx_esai_platform_data sab_esai_pdata = {
++ .flags = IMX_ESAI_NET,
++};
++static int __init imx6q_init_audio(void)
++{
++ struct clk *pll3_pfd, *esai_clk;
++ imx6q_add_imx_esai(0, &sab_esai_pdata);
++
++ esai_clk = clk_get(NULL, "esai_clk");
++ if (IS_ERR(esai_clk))
++ return PTR_ERR(esai_clk);
++
++ pll3_pfd = clk_get(NULL, "pll3_pfd_508M");
++ if (IS_ERR(pll3_pfd))
++ return PTR_ERR(pll3_pfd);
++
++ clk_set_parent(esai_clk, pll3_pfd);
++ clk_set_rate(esai_clk, 101647058);
++
++ return 0;
++}
++
++#ifdef CONFIG_IR_GPIO_CIR
++static struct gpio_ir_recv_platform_data c1_ir_data = {
++ .gpio_nr = GPIO_IR_IN,
++ .active_low = 1,
++};
++
++static struct platform_device c1_ir = {
++ .name = "gpio-rc-recv",
++ .id = -1,
++ .dev = {
++ .platform_data = &c1_ir_data,
++ }
++};
++#endif
++
++#if 0
++/* Following will activate the analog audio out for testing */
++static struct platform_pwm_backlight_data mx6_c1_pwm_dummy1_backlight_data = {
++ .pwm_id = 0,
++ .max_brightness = 200,
++ .dft_brightness = 128,
++ .pwm_period_ns = 5000000,
++};
++
++static struct platform_pwm_backlight_data mx6_c1_pwm_dummy2_backlight_data = {
++ .pwm_id = 1,
++ .max_brightness = 201,
++ .dft_brightness = 128,
++ .pwm_period_ns = 1000000,
++};
++#endif
++
++static struct platform_pwm_backlight_data mx6_c1_pwm_lvds_backlight_data = {
++ .pwm_id = 2,
++ .max_brightness = 248,
++ .dft_brightness = 128,
++ .pwm_period_ns = 50000,
++};
++
++static struct platform_pwm_backlight_data mx6_c1_pwm_dsi_backlight_data = {
++ .pwm_id = 3,
++ .max_brightness = 203,
++ .dft_brightness = 128,
++ .pwm_period_ns = 50000,
++};
++
++static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
++ char **cmdline, struct meminfo *mi)
++{
++}
++
++static int __init caam_setup(char *__unused)
++{
++ caam_enabled = 1;
++ return 1;
++}
++early_param("caam", caam_setup);
++
++#define SNVS_LPCR 0x38
++static void mx6_snvs_poweroff(void)
++{
++
++ void __iomem *mx6_snvs_base = MX6_IO_ADDRESS(MX6Q_SNVS_BASE_ADDR);
++ u32 value;
++ value = readl(mx6_snvs_base + SNVS_LPCR);
++ /*set TOP and DP_EN bit*/
++ writel(value | 0x60, mx6_snvs_base + SNVS_LPCR);
++}
++
++static const struct imx_pcie_platform_data mx6_c1_pcie_data __initconst = {
++ .pcie_pwr_en = -EINVAL,
++ .pcie_rst = -EINVAL,
++ .pcie_wake_up = -EINVAL,
++ .pcie_dis = -EINVAL,
++};
++
++static const struct imxuart_platform_data usom_bt_uart_data = {
++ .flags = IMXUART_HAVE_RTSCTS | IMXUART_SDMA,
++ .dma_req_tx = MX6Q_DMA_REQ_UART4_TX,
++ .dma_req_rx = MX6Q_DMA_REQ_UART4_RX,
++};
++
++/*
++ * Board specific initialization.
++ */
++static void __init mx6_c1_board_init(void)
++{
++ int i;
++ struct clk *clko, *clko2, *enet;
++ struct clk *new_parent;
++ int rate;
++
++ if (cpu_is_mx6q())
++ mxc_iomux_v3_setup_multiple_pads(mx6q_c1_pads,
++ ARRAY_SIZE(mx6q_c1_pads));
++ else if (cpu_is_mx6dl()) {
++ mxc_iomux_v3_setup_multiple_pads(mx6dl_c1_pads,
++ ARRAY_SIZE(mx6dl_c1_pads));
++ }
++
++ imx6q_add_imx_uart(0, NULL);
++
++ /*
++ * MX6DL/Solo only supports single IPU
++ * The following codes are used to change ipu id
++ * and display id information for MX6DL/Solo. Then
++ * register 1 IPU device and up to 2 displays for
++ * MX6DL/Solo
++ */
++ if (cpu_is_mx6dl()) {
++ ldb_data.ipu_id = 0;
++ ldb_data.sec_ipu_id = 0;
++ }
++ imx6q_add_mxc_hdmi_core(&hdmi_core_data);
++
++ imx6q_add_ipuv3(0, &ipu_data[0]);
++ if (cpu_is_mx6q()) {
++ imx6q_add_ipuv3(1, &ipu_data[1]);
++ for (i = 0; i < 4 && i < ARRAY_SIZE(c1_fb_data); i++)
++ imx6q_add_ipuv3fb(i, &c1_fb_data[i]);
++ } else
++ for (i = 0; i < 2 && i < ARRAY_SIZE(c1_fb_data); i++)
++ imx6q_add_ipuv3fb(i, &c1_fb_data[i]);
++
++ imx6q_add_vdoa();
++ imx6q_add_ldb(&ldb_data);
++ imx6q_add_v4l2_output(0);
++ imx6q_add_v4l2_capture(0, &capture_data[0]);
++ imx6q_add_v4l2_capture(1, &capture_data[1]);
++ imx6q_add_imx_snvs_rtc();
++
++ if (1 == caam_enabled)
++ imx6q_add_imx_caam();
++
++ imx6q_add_imx_i2c(0, &mx6q_c1_i2c_data);
++ imx6q_add_imx_i2c(1, &mx6q_c1_i2c_data);
++ imx6q_add_imx_i2c(2, &mx6q_c1_i2c_data);
++ i2c_register_board_info(0, mxc_i2c0_board_info, /* I2C1 */
++ ARRAY_SIZE(mxc_i2c0_board_info));
++ i2c_register_board_info(1, mxc_i2c1_board_info, /* I2C2 / HDMI DDC */
++ ARRAY_SIZE(mxc_i2c1_board_info));
++ i2c_register_board_info(2, mxc_i2c2_board_info, /* I2C3 */
++ ARRAY_SIZE(mxc_i2c2_board_info));
++ imx6q_add_mxc_hdmi(&hdmi_data);
++
++ imx6q_add_anatop_thermal_imx(1, &mx6q_c1_anatop_thermal_data);
++ /* Set GPR1, bit 21 to 1 */
++ mxc_iomux_set_gpr_register(1, 21, 1, 1);
++ /* Set enet clock to 50MHz RMII */
++ enet = clk_get_sys("enet.0", NULL);
++ if (IS_ERR(enet))
++ pr_err("Unable to get enet.0 clock\n");
++ else {
++ clk_prepare(enet);
++ clk_set_rate(enet, 50000000);
++ clk_enable(enet);
++ }
++#if 1
++ mxc_iomux_v3_setup_multiple_pads(mx6dl_ar8035_phy, ARRAY_SIZE(mx6dl_ar8035_phy));
++#else
++ mxc_iomux_v3_setup_multiple_pads(mx6dl_ar8030_phy, ARRAY_SIZE(mx6dl_ar8030_phy));
++#endif
++ gpio_request(USOM_ENET_RST, "eth-phy-rst");
++ udelay(1000); // Maybe not needed since 0 value is already asserted (pull down)
++ gpio_direction_output(USOM_ENET_RST, 0);
++ udelay(2000); // Maybe not needed since 0 value is already asserted (pull down)
++ gpio_set_value(USOM_ENET_RST, 1);
++ mdelay(10);
++#if 1
++ imx6_init_fec(fec_data_rgmii);
++#else
++ imx6_init_fec(fec_data_rmii);
++#endif
++#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO
++ /* Make sure the IOMUX_OBSRV_MUX1 is set to ENET_IRQ. */
++ mxc_iomux_set_specialbits_register(IOMUX_OBSRV_MUX1_OFFSET,
++ OBSRV_MUX1_ENET_IRQ, OBSRV_MUX1_MASK);
++#endif
++ imx6q_add_sdhci_usdhc_imx(1, &mx6q_c1_sd2_data);
++ imx_add_viv_gpu(&imx6_gpu_data, &imx6q_gpu_pdata);
++ imx6q_c1_init_usb();
++ /* SATA is not supported by MX6DL/Solo */
++ if (cpu_is_mx6q()) {
++#ifdef CONFIG_SATA_AHCI_PLATFORM
++ imx6q_add_ahci(0, &mx6q_c1_sata_data);
++#else
++ mx6q_c1_sata_init(NULL,
++ (void __iomem *)ioremap(MX6Q_SATA_BASE_ADDR, SZ_4K));
++#endif
++ }
++ imx6q_add_vpu();
++ imx6q_init_audio();
++ imx_asrc_data.asrc_core_clk = clk_get(NULL, "asrc_clk");
++ imx_asrc_data.asrc_audio_clk = clk_get(NULL, "asrc_serial_clk");
++ imx6q_add_asrc(&imx_asrc_data);
++
++ imx6q_add_mxc_pwm(0);
++ imx6q_add_mxc_pwm(1);
++ imx6q_add_mxc_pwm(2);
++ imx6q_add_mxc_pwm(3);
++ imx6q_add_mxc_pwm_backlight(0, &mx6_c1_pwm_lvds_backlight_data);
++ imx6q_add_mxc_pwm_backlight(1, &mx6_c1_pwm_dsi_backlight_data);
++#if 0
++ imx6q_add_mxc_pwm_backlight(2, &mx6_c1_pwm_dummy1_backlight_data);
++ imx6q_add_mxc_pwm_backlight(3, &mx6_c1_pwm_dummy2_backlight_data);
++#endif
++ mxc_spdif_data.spdif_core_clk = clk_get_sys("mxc_spdif.0", NULL);
++ clk_put(mxc_spdif_data.spdif_core_clk);
++ imx6q_add_spdif(&mxc_spdif_data);
++ imx6q_add_spdif_dai();
++ imx6q_add_spdif_audio_device();
++
++ imx6q_add_otp();
++ imx6q_add_viim();
++ imx6q_add_imx2_wdt(0, NULL);
++ imx6q_add_dma();
++
++ imx6q_add_hdmi_soc();
++ imx6q_add_hdmi_soc_dai();
++
++ if (cpu_is_mx6dl()) {
++ imx6dl_add_imx_pxp();
++ imx6dl_add_imx_pxp_client();
++ }
++
++ clko2 = clk_get(NULL, "clko2_clk");
++ if (IS_ERR(clko2))
++ pr_err("can't get CLKO2 clock.\n");
++
++ new_parent = clk_get(NULL, "osc_clk");
++ if (!IS_ERR(new_parent)) {
++ clk_set_parent(clko2, new_parent);
++ clk_put(new_parent);
++ }
++ rate = clk_round_rate(clko2, 24000000);
++ clk_set_rate(clko2, rate);
++ clk_enable(clko2);
++
++ /* Camera and audio use osc clock */
++ clko = clk_get(NULL, "clko_clk");
++ if (!IS_ERR(clko))
++ clk_set_parent(clko, clko2);
++
++ pm_power_off = mx6_snvs_poweroff;
++ imx6q_add_busfreq();
++
++ /* Add PCIe RC interface support */
++ imx6q_add_pcie(&mx6_c1_pcie_data);
++ imx6_add_armpmu();
++ imx6q_add_perfmon(0);
++ imx6q_add_perfmon(1);
++ imx6q_add_perfmon(2);
++#ifdef CONFIG_IR_GPIO_CIR
++ /* Register the infra red receiver as a GPIO device */
++ platform_device_register(&c1_ir);
++#endif
++
++ /* WLan and BT stuff */
++ /* init and put in reset */
++ gpio_request(USOM_WL_RST, "wl-rst");
++ gpio_direction_output(USOM_WL_RST, 0);
++ gpio_request(USOM_BT_RST, "bt-rst");
++ gpio_direction_output(USOM_BT_RST, 0);
++ gpio_request(USOM_REG_ON, "wl-bt-reg-on");
++ gpio_direction_output(USOM_REG_ON, 0);
++ gpio_request(USOM_XTAL_ON, "wl-bt-xtal-on");
++ gpio_direction_output(USOM_XTAL_ON, 0);
++ msleep(100);
++ gpio_set_value(USOM_REG_ON, 1);
++ gpio_set_value(USOM_XTAL_ON, 1);
++
++
++ /* Now release from reset */
++ msleep (200); /* 20 mSec sounds too big */
++ gpio_set_value(USOM_WL_RST, 1);
++ gpio_set_value(USOM_BT_RST, 1);
++ msleep (200); /* 20 mSec sounds too big */
++
++ /* Register SDIO as brfmac */
++ imx6q_add_imx_uart(3, &usom_bt_uart_data);
++ imx6q_add_sdhci_usdhc_imx(0, &mx6q_c1_sd1_data);
++}
++
++extern void __iomem *twd_base;
++static void __init mx6_c1_timer_init(void)
++{
++ struct clk *uart_clk;
++#ifdef CONFIG_LOCAL_TIMERS
++ twd_base = ioremap(LOCAL_TWD_ADDR, SZ_256);
++ BUG_ON(!twd_base);
++#endif
++ mx6_clocks_init(32768, 24000000, 0, 0);
++
++ uart_clk = clk_get_sys("imx-uart.0", NULL);
++ early_console_setup(UART1_BASE_ADDR, uart_clk);
++}
++
++static struct sys_timer mx6_c1_timer = {
++ .init = mx6_c1_timer_init,
++};
++
++static void __init mx6q_c1_reserve(void)
++{
++#if defined(CONFIG_MXC_GPU_VIV) || defined(CONFIG_MXC_GPU_VIV_MODULE)
++ phys_addr_t phys;
++
++ if (imx6q_gpu_pdata.reserved_mem_size) {
++ phys = memblock_alloc_base(imx6q_gpu_pdata.reserved_mem_size,
++ SZ_4K, SZ_1G);
++ memblock_remove(phys, imx6q_gpu_pdata.reserved_mem_size);
++ imx6q_gpu_pdata.reserved_mem_base = phys;
++ }
++#endif
++}
++
++/*
++ * initialize __mach_desc_MX6Q_C1 data structure.
++ */
++MACHINE_START(C1, "SolidRun i.MX 6Quad/Dual/DualLite/Solo Carrier One Board")
++ /* Maintainer: Freescale Semiconductor, Inc. */
++ .boot_params = MX6_PHYS_OFFSET + 0x100,
++ .fixup = fixup_mxc_board,
++ .map_io = mx6_map_io,
++ .init_irq = mx6_init_irq,
++ .init_machine = mx6_c1_board_init,
++ .timer = &mx6_c1_timer,
++ .reserve = mx6q_c1_reserve,
++MACHINE_END
+diff --git a/arch/arm/mach-mx6/board-mx6q_c1.h b/arch/arm/mach-mx6/board-mx6q_c1.h
+new file mode 100644
+index 0000000..82906a9
+--- /dev/null
++++ b/arch/arm/mach-mx6/board-mx6q_c1.h
+@@ -0,0 +1,170 @@
++/*
++ * Copyright (C) 2013 SolidRun ltd.
++ * Based on sabresd board from Freescale Semiconductor, Inc. All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#ifndef _BOARD_MX6Q_SABRESD_H
++#define _BOARD_MX6Q_SABRESD_H
++#include <mach/iomux-mx6q.h>
++
++static iomux_v3_cfg_t mx6q_c1_pads[] = {
++ /* WiFi 11n and BlueTooth */
++ MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT,
++ MX6Q_PAD_DISP0_DAT23__GPIO_5_17, /* WL_RST_IN */
++ MX6Q_PAD_DISP0_DAT10__GPIO_4_31, /* WL_GPIO_0 */
++ MX6Q_PAD_DISP0_DAT18__GPIO_5_12, /* WL_GPIO_1 */
++ MX6Q_PAD_EIM_D19__GPIO_3_19, /* WL_BT_REG_ON */
++ MX6Q_PAD_DISP0_DAT19__GPIO_5_13, /* XTAL power up */
++ MX6Q_PAD_NANDF_CS3__GPIO_6_16, /* BT_RST_N */
++ MX6Q_PAD_NANDF_ALE__GPIO_6_8, /* BT_GPIO_0 */
++ MX6Q_PAD_NANDF_CLE__GPIO_6_7, /* BT_GPIO_1 */
++
++ /* AUD5 for BRCM WiFi/BT/FM */
++ MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
++ MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
++ MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
++ MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
++
++ /* USDHC1 - Connected to BRCM Wifi/BT/FM */
++ MX6Q_PAD_SD1_CLK__USDHC1_CLK_50MHZ_40OHM,
++ MX6Q_PAD_SD1_CMD__USDHC1_CMD_50MHZ_40OHM,
++ MX6Q_PAD_SD1_DAT0__USDHC1_DAT0_50MHZ_40OHM,
++ MX6Q_PAD_SD1_DAT1__USDHC1_DAT1_50MHZ_40OHM,
++ MX6Q_PAD_SD1_DAT2__USDHC1_DAT2_50MHZ_40OHM,
++ MX6Q_PAD_SD1_DAT3__USDHC1_DAT3_50MHZ_40OHM,
++
++ /* UART4 for BRCM WiFi/BT/FM */
++ MX6Q_PAD_CSI0_DAT12__UART4_TXD,
++ MX6Q_PAD_CSI0_DAT13__UART4_RXD,
++ MX6Q_PAD_CSI0_DAT17__UART4_CTS,
++ MX6Q_PAD_CSI0_DAT16__UART4_RTS,
++
++ /* SPDIF out */
++ MX6Q_PAD_GPIO_17__SPDIF_OUT1,
++ /* CAN1 */
++ MX6Q_PAD_KEY_ROW2__CAN1_RXCAN,
++ MX6Q_PAD_GPIO_7__CAN1_TXCAN,
++
++ /* CCM */
++ MX6Q_PAD_GPIO_5__CCM_CLKO, /* SGTL500 sys_mclk */
++ MX6Q_PAD_NANDF_CS2__CCM_CLKO2, /* MIPI CSI clock */
++
++ /* ECSPI2 */
++ MX6Q_PAD_EIM_CS0__ECSPI2_SCLK,
++ MX6Q_PAD_EIM_CS1__ECSPI2_MOSI,
++ MX6Q_PAD_EIM_OE__ECSPI2_MISO,
++ MX6Q_PAD_EIM_RW__ECSPI2_SS0,
++ MX6Q_PAD_EIM_LBA__ECSPI2_SS1,
++
++ /* I2C1 */
++ MX6Q_PAD_EIM_D21__I2C1_SCL,
++ MX6Q_PAD_EIM_D28__I2C1_SDA,
++
++ /* I2C2 */
++ MX6Q_PAD_KEY_COL3__I2C2_SCL,
++ MX6Q_PAD_KEY_ROW3__I2C2_SDA,
++
++ /* I2C3 */
++ MX6Q_PAD_EIM_D17__I2C3_SCL,
++ MX6Q_PAD_EIM_D18__I2C3_SDA,
++
++ /* PWM */
++ MX6Q_PAD_DISP0_DAT8__PWM1_PWMO,
++ MX6Q_PAD_DISP0_DAT9__PWM2_PWMO,
++ MX6Q_PAD_SD4_DAT1__PWM3_PWMO,
++ MX6Q_PAD_SD4_DAT2__PWM4_PWMO,
++
++ /* UART1 for debug */
++ MX6Q_PAD_CSI0_DAT10__UART1_TXD,
++ MX6Q_PAD_CSI0_DAT11__UART1_RXD,
++
++ /* UART2 RX, TX, CTS and RTS */
++ MX6Q_PAD_SD4_DAT4__UART2_RXD,
++ MX6Q_PAD_SD4_DAT5__UART2_RTS,
++ MX6Q_PAD_SD4_DAT6__UART2_CTS,
++ MX6Q_PAD_SD4_DAT7__UART2_TXD,
++
++ /* USBOTG ID pin */
++ IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, (PAD_CTL_PKE | PAD_CTL_PUE | \
++ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_LOW | \
++ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)),
++ /*
++ * Originally MX6Q_PAD_GPIO_1__USBOTG_ID, but we want it to be
++ * pulled down ID pin for fixed host connection.
++ */
++
++ /* USB power enable pins */
++ MX6Q_PAD_EIM_D22__GPIO_3_22,
++ MX6Q_PAD_GPIO_0__GPIO_1_0,
++
++ /* USB OC pin */
++ MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC,
++ MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC,
++
++ /* USDHC2 */
++ MX6Q_PAD_SD2_CLK__USDHC2_CLK,
++ MX6Q_PAD_SD2_CMD__USDHC2_CMD,
++ MX6Q_PAD_SD2_DAT0__USDHC2_DAT0,
++ MX6Q_PAD_SD2_DAT1__USDHC2_DAT1,
++ MX6Q_PAD_SD2_DAT2__USDHC2_DAT2,
++ MX6Q_PAD_SD2_DAT3__USDHC2_DAT3,
++ MX6Q_PAD_GPIO_4__USDHC2_CD, /* SD2_CD */
++ MX6Q_PAD_GPIO_2__USDHC2_WP, /* SD2_WP */
++
++ /* USDHC3 */
++ MX6Q_PAD_SD3_CLK__USDHC3_CLK_50MHZ,
++ MX6Q_PAD_SD3_CMD__USDHC3_CMD_50MHZ,
++ MX6Q_PAD_SD3_DAT0__USDHC3_DAT0_50MHZ,
++ MX6Q_PAD_SD3_DAT1__USDHC3_DAT1_50MHZ,
++ MX6Q_PAD_SD3_DAT2__USDHC3_DAT2_50MHZ,
++ MX6Q_PAD_SD3_DAT3__USDHC3_DAT3_50MHZ,
++ MX6Q_PAD_SD3_DAT4__USDHC3_DAT4_50MHZ,
++ MX6Q_PAD_SD3_DAT5__USDHC3_DAT5_50MHZ,
++ MX6Q_PAD_SD3_DAT6__USDHC3_DAT6_50MHZ,
++ MX6Q_PAD_SD3_DAT7__USDHC3_DAT7_50MHZ,
++// TODO - FIXME? MX6Q_PAD_NANDF_D0__GPIO_2_0, /* SD3_CD */
++// MX6Q_PAD_NANDF_D1__GPIO_2_1, /* SD3_WP */
++ MX6Q_PAD_SD3_RST__USDHC3_RST, /* SD3_RST */
++ MX6Q_PAD_GPIO_18__USDHC3_VSELECT, /* SD3_VSELECT */
++
++ /* USDHC4 */
++ MX6Q_PAD_SD4_CLK__USDHC4_CLK_50MHZ,
++ MX6Q_PAD_SD4_CMD__USDHC4_CMD_50MHZ,
++ MX6Q_PAD_SD4_DAT0__USDHC4_DAT0_50MHZ,
++ MX6Q_PAD_SD4_DAT1__USDHC4_DAT1_50MHZ,
++ MX6Q_PAD_SD4_DAT2__USDHC4_DAT2_50MHZ,
++ MX6Q_PAD_SD4_DAT3__USDHC4_DAT3_50MHZ,
++ MX6Q_PAD_SD4_DAT4__USDHC4_DAT4_50MHZ,
++ MX6Q_PAD_SD4_DAT5__USDHC4_DAT5_50MHZ,
++ MX6Q_PAD_SD4_DAT6__USDHC4_DAT6_50MHZ,
++ MX6Q_PAD_SD4_DAT7__USDHC4_DAT7_50MHZ,
++
++ /* IR in */
++ MX6Q_PAD_GPIO_2__GPIO_1_2,
++ /* MX6Q_PAD_EIM_DA9__GPIO_3_9 on CuBox-i */
++};
++
++static iomux_v3_cfg_t mx6q_c1_hdmi_ddc_pads[] = {
++ MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL, /* HDMI DDC SCL */
++ MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA, /* HDMI DDC SDA */
++};
++
++static iomux_v3_cfg_t mx6q_c1_i2c2_pads[] = {
++ MX6Q_PAD_KEY_COL3__I2C2_SCL, /* I2C2 SCL */
++ MX6Q_PAD_KEY_ROW3__I2C2_SDA, /* I2C2 SDA */
++};
++#endif
+--
+1.7.9.5
+
diff --git a/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0003-LVDS-on-LDB_SEP1.patch b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0003-LVDS-on-LDB_SEP1.patch
new file mode 100644
index 0000000..53c89ca
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0003-LVDS-on-LDB_SEP1.patch
@@ -0,0 +1,28 @@
+From 9417de1558e32e616546b2a896e3c0d91a23e3fe Mon Sep 17 00:00:00 2001
+From: Rabeeh Khoury <rabeeh at solid-run.com>
+Date: Thu, 26 Sep 2013 11:57:21 +0200
+Subject: [PATCH 3/4] LVDS on LDB_SEP1
+
+Otherwise HDMI won't come up
+
+Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
+---
+ arch/arm/mach-mx6/board-mx6q_c1.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-mx6/board-mx6q_c1.c b/arch/arm/mach-mx6/board-mx6q_c1.c
+index ebbf8b8..6fd363e 100644
+--- a/arch/arm/mach-mx6/board-mx6q_c1.c
++++ b/arch/arm/mach-mx6/board-mx6q_c1.c
+@@ -456,7 +456,7 @@ static struct fsl_mxc_ldb_platform_data ldb_data = {
+ .ipu_id = 1,
+ .disp_id = 1,
+ .ext_ref = 1,
+- .mode = LDB_SEP0,
++ .mode = LDB_SEP1,
+ .sec_ipu_id = 1,
+ .sec_disp_id = 0,
+ };
+--
+1.7.9.5
+
diff --git a/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0004-Added-Carrier-One-C1-to-imx6_defconfig.patch b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0004-Added-Carrier-One-C1-to-imx6_defconfig.patch
new file mode 100644
index 0000000..5de4eff
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/0004-Added-Carrier-One-C1-to-imx6_defconfig.patch
@@ -0,0 +1,25 @@
+From e69cc3a53bd1f9113114eacb5b070f53baec9bfb Mon Sep 17 00:00:00 2001
+From: Rabeeh Khoury <rabeeh at solid-run.com>
+Date: Thu, 26 Sep 2013 11:58:07 +0200
+Subject: [PATCH 4/4] Added Carrier-One (C1) to imx6_defconfig
+
+Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
+---
+ arch/arm/configs/imx6_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/configs/imx6_defconfig b/arch/arm/configs/imx6_defconfig
+index b02b875..af05e9f 100644
+--- a/arch/arm/configs/imx6_defconfig
++++ b/arch/arm/configs/imx6_defconfig
+@@ -311,6 +311,7 @@ CONFIG_MACH_MX6Q_SABRELITE=y
+ CONFIG_MACH_MX6Q_SABRESD=y
+ CONFIG_MACH_MX6Q_SABREAUTO=y
+ CONFIG_MACH_MX6Q_HDMIDONGLE=y
++CONFIG_MACH_C1=y
+
+ #
+ # MX6 Options:
+--
+1.7.9.5
+
diff --git a/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/defconfig b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/defconfig
new file mode 100644
index 0000000..a168850
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/defconfig
@@ -0,0 +1,2733 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 3.0.35 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_FIQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_BOOST is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+CONFIG_IMX_HAVE_PLATFORM_DMA=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_MLB=y
+CONFIG_IMX_HAVE_PLATFORM_FEC=y
+CONFIG_IMX_HAVE_PLATFORM_FLEXCAN=y
+CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y
+CONFIG_IMX_HAVE_PLATFORM_GPMI_NFC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_SNVS_RTC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_CAAM=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_ESAI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_PWM=y
+CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y
+CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_IPUV3=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_VPU=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_DVFS=y
+CONFIG_IMX_HAVE_PLATFORM_AHCI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_OCOTP=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_VIIM=y
+CONFIG_IMX_HAVE_PLATFORM_PERFMON=y
+CONFIG_IMX_HAVE_PLATFORM_LDB=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_PXP=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_ELCDIF=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_EPDC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_SPDIF=y
+CONFIG_IMX_HAVE_PLATFORM_VIV_GPU=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_HDMI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_ANATOP_THERMAL=y
+CONFIG_IMX_HAVE_PLATFORM_FSL_OTG=y
+CONFIG_IMX_HAVE_PLATFORM_FSL_USB_WAKEUP=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_PM=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_ASRC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_MIPI_DSI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_MIPI_CSI2=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_VDOA=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_PCIE=y
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MX503 is not set
+# CONFIG_ARCH_MX51 is not set
+CONFIG_ARCH_MX6=y
+CONFIG_ARCH_MX6Q=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_SOC_IMX6Q=y
+CONFIG_MACH_MX6Q_ARM2=y
+# CONFIG_MACH_MX6SL_ARM2 is not set
+# CONFIG_MACH_MX6SL_EVK is not set
+CONFIG_MACH_MX6Q_SABRELITE=y
+CONFIG_MACH_MX6Q_SABRESD=y
+CONFIG_MACH_MX6Q_SABREAUTO=y
+CONFIG_MACH_MX6Q_HDMIDONGLE=y
+CONFIG_MACH_C1=y
+
+#
+# MX6 Options:
+#
+# CONFIG_IMX_PCIE is not set
+CONFIG_USB_EHCI_ARC_H1=y
+CONFIG_USB_FSL_ARC_OTG=y
+# CONFIG_MX6_INTER_LDO_BYPASS is not set
+# CONFIG_MX6_CLK_FOR_BOOTUI_TRANS is not set
+CONFIG_ISP1504_MXC=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+# CONFIG_MXC_DEBUG_BOARD is not set
+CONFIG_MXC_REBOOT_MFGMODE=y
+# CONFIG_MXC_REBOOT_ANDROID_CMD is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+CONFIG_ARCH_MXC_AUDMUX_V2=y
+CONFIG_IRAM_ALLOC=y
+CONFIG_CLK_DEBUG=y
+CONFIG_DMA_ZONE_SIZE=184
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_ARM_ERRATA_742230 is not set
+# CONFIG_ARM_ERRATA_742231 is not set
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_ARM_ERRATA_720789 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+# CONFIG_ARM_ERRATA_753970 is not set
+CONFIG_ARM_ERRATA_754322=y
+# CONFIG_ARM_ERRATA_754327 is not set
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_PL310_ERRATA_769419=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_CLEANCACHE is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+# CONFIG_USE_OF is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw rootfstype=jffs2 ip=off"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_IMX=y
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_DEVICE_TIME_DEBUG=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME_CLK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=y
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_MCP251X is not set
+CONFIG_HAVE_CAN_FLEXCAN=y
+CONFIG_CAN_FLEXCAN=y
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=y
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+CONFIG_BT_HCIUART_ATH3K=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIVHCI=y
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=y
+CONFIG_LIB80211_CRYPT_CCMP=y
+CONFIG_LIB80211_CRYPT_TKIP=y
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RFKILL_GPIO is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_DEVTMPFS_MOUNT is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_GPMI_NAND=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+CONFIG_MXS_PERFMON=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_SATA_MV is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ARASAN_CF is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_PLATFORM is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+CONFIG_FEC_NAPI=y
+# CONFIG_FEC_1588 is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+CONFIG_HOSTAP=y
+# CONFIG_HOSTAP_FIRMWARE is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_MWIFIEX is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_IMX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_ELAN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+CONFIG_TOUCHSCREEN_MAX11801=y
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_P1003 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_ISL29023=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+CONFIG_FSL_OTP=y
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_MXS_VIIM=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_IMX_VER_2_3=y
+CONFIG_SPI_IMX=y
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X_IRQ is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_WM8994 is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+CONFIG_SABRESD_MAX8903=y
+# CONFIG_CHARGER_GPIO is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+CONFIG_SENSORS_MAX17135=y
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_MAG3110=y
+# CONFIG_MXC_MMA8450 is not set
+CONFIG_MXC_MMA8451=y
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_MPCORE_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_IMX2_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+CONFIG_MFD_SUPPORT=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+CONFIG_MFD_WM8994=y
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_PMIC_DIALOG is not set
+# CONFIG_MFD_MC_PMIC is not set
+# CONFIG_MFD_MC34708 is not set
+CONFIG_MFD_PFUZE=y
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_TPS65910 is not set
+CONFIG_MFD_MAX17135=y
+CONFIG_MFD_MXC_HDMI=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_WM8994 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_MC34708 is not set
+CONFIG_REGULATOR_PFUZE100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_REGULATOR_ANATOP=y
+# CONFIG_REGULATOR_TPS6524X is not set
+CONFIG_REGULATOR_MAX17135=y
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA827X=y
+CONFIG_MEDIA_TUNER_TDA18271=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Miscelaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_MXC_CAMERA=m
+
+#
+# MXC Camera/V4L2 PRP Features support
+#
+CONFIG_VIDEO_MXC_IPU_CAMERA=y
+# CONFIG_VIDEO_MXC_CSI_CAMERA is not set
+# CONFIG_MXC_CAMERA_MICRON111 is not set
+# CONFIG_MXC_CAMERA_OV2640 is not set
+CONFIG_MXC_CAMERA_OV3640=m
+CONFIG_MXC_CAMERA_OV5640=m
+CONFIG_MXC_CAMERA_OV8820_MIPI=m
+CONFIG_MXC_CAMERA_OV5642=m
+CONFIG_MXC_TVIN_ADV7180=m
+CONFIG_MXC_CAMERA_OV5640_MIPI=m
+# CONFIG_MXC_MIPI_CSI2_TVIN_ADV7280 is not set
+CONFIG_MXC_CAMERA_SENSOR_CLK=m
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
+CONFIG_MXC_IPU_PRP_ENC=m
+CONFIG_MXC_IPU_CSI_ENC=m
+CONFIG_VIDEO_MXC_OUTPUT=y
+CONFIG_VIDEO_MXC_IPU_OUTPUT=y
+# CONFIG_VIDEO_MXC_IPUV1_WVGA_OUTPUT is not set
+# CONFIG_VIDEO_MXC_OPL is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_DRM=m
+CONFIG_DRM_VIVANTE=m
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_FB_MXC=y
+CONFIG_FB_MXC_EDID=y
+CONFIG_FB_MXC_SYNC_PANEL=y
+# CONFIG_FB_MXC_EPSON_VGA_SYNC_PANEL is not set
+CONFIG_FB_MXC_LDB=y
+CONFIG_FB_MXC_MIPI_DSI=y
+CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
+# CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL is not set
+# CONFIG_FB_MXC_SEIKO_WVGA_SYNC_PANEL is not set
+# CONFIG_FB_MXC_SII902X is not set
+# CONFIG_FB_MXC_CH7026 is not set
+# CONFIG_FB_MXC_TVOUT_CH7024 is not set
+# CONFIG_FB_MXC_ASYNC_PANEL is not set
+CONFIG_FB_MXC_EINK_PANEL=y
+# CONFIG_FB_MXC_EINK_AUTO_UPDATE_MODE is not set
+# CONFIG_FB_MXC_SIPIX_PANEL is not set
+# CONFIG_FB_MXC_ELCDIF_FB is not set
+CONFIG_FB_MXC_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+# CONFIG_SND_ARMAACI is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_MX2=y
+CONFIG_SND_MXC_SOC_SPDIF_DAI=y
+CONFIG_SND_SOC_IMX_SGTL5000=y
+# CONFIG_SND_SOC_IMX_WM8958 is not set
+CONFIG_SND_SOC_IMX_WM8962=y
+CONFIG_SND_SOC_IMX_CS42888=y
+# CONFIG_SND_SOC_IMX_SI4763 is not set
+CONFIG_SND_SOC_IMX_SPDIF=y
+CONFIG_SND_SOC_IMX_HDMI=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_MXC_HDMI=y
+CONFIG_SND_SOC_MXC_SPDIF=y
+CONFIG_SND_SOC_SGTL5000=y
+CONFIG_SND_SOC_CS42888=y
+CONFIG_SND_SOC_WM8962=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=m
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ARC=y
+CONFIG_USB_EHCI_ARC_OTG=y
+# CONFIG_USB_EHCI_ARC_HSIC is not set
+# CONFIG_USB_STATIC_IRAM is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHCI_MXC is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ARC=y
+# CONFIG_IMX_USB_CHARGER is not set
+CONFIG_USB_ARC=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_FSL_UTP is not set
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MXC_OTG=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+
+#
+# LED Triggers
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_MXC_V2 is not set
+CONFIG_RTC_DRV_SNVS=y
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_DW_DMAC is not set
+CONFIG_MXC_PXP_V2=y
+CONFIG_MXC_PXP_CLIENT_DEVICE=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+
+#
+# MXC support drivers
+#
+CONFIG_MXC_IPU=y
+CONFIG_MXC_IPU_V3=y
+CONFIG_MXC_IPU_V3H=y
+
+#
+# MXC SSI support
+#
+# CONFIG_MXC_SSI is not set
+
+#
+# MXC Digital Audio Multiplexer support
+#
+# CONFIG_MXC_DAM is not set
+
+#
+# MXC PMIC support
+#
+# CONFIG_MXC_PMIC_MC13783 is not set
+# CONFIG_MXC_PMIC_MC13892 is not set
+# CONFIG_MXC_PMIC_MC34704 is not set
+# CONFIG_MXC_PMIC_MC9SDZ60 is not set
+# CONFIG_MXC_PMIC_MC9S08DZ60 is not set
+
+#
+# MXC Security Drivers
+#
+# CONFIG_MXC_SECURITY_SCC is not set
+# CONFIG_MXC_SECURITY_RNG is not set
+
+#
+# MXC MPEG4 Encoder Kernel module support
+#
+# CONFIG_MXC_HMP4E is not set
+
+#
+# MXC HARDWARE EVENT
+#
+# CONFIG_MXC_HWEVENT is not set
+
+#
+# MXC VPU(Video Processing Unit) support
+#
+CONFIG_MXC_VPU=y
+# CONFIG_MXC_VPU_DEBUG is not set
+# CONFIG_MX6_VPU_352M is not set
+
+#
+# MXC Asynchronous Sample Rate Converter support
+#
+CONFIG_MXC_ASRC=y
+
+#
+# MXC Bluetooth support
+#
+
+#
+# Broadcom GPS ioctrl support
+#
+
+#
+# MXC Media Local Bus Driver
+#
+CONFIG_MXC_MLB=y
+CONFIG_MXC_MLB150=m
+
+#
+# i.MX ADC support
+#
+# CONFIG_IMX_ADC is not set
+
+#
+# MXC Vivante GPU support
+#
+CONFIG_MXC_GPU_VIV=y
+
+#
+# ANATOP_THERMAL
+#
+CONFIG_ANATOP_THERMAL=y
+
+#
+# MXC MIPI Support
+#
+CONFIG_MXC_MIPI_CSI2=y
+
+#
+# MXC HDMI CEC (Consumer Electronics Control) support
+#
+# CONFIG_MXC_HDMI_CEC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_RCU_CPU_STALL_VERBOSE=y
+# CONFIG_LKDTM is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_OC_ETM=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_CRYPTODEV is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=255
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=2048
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
+# CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_TEST is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE=7
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+# CONFIG_AVERAGE is not set
diff --git a/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/mxc_hdmi-dont-require-cea-mode.patch b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/mxc_hdmi-dont-require-cea-mode.patch
new file mode 100644
index 0000000..817c1e0
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx-3.0.35/hummingboard/mxc_hdmi-dont-require-cea-mode.patch
@@ -0,0 +1,18 @@
+diff --git a/drivers/video/mxc_hdmi.c b/drivers/video/mxc_hdmi.c
+index 544f352..fa67128 100644
+--- a/drivers/video/mxc_hdmi.c
++++ b/drivers/video/mxc_hdmi.c
+@@ -1804,10 +1804,10 @@ static void mxc_hdmi_edid_rebuild_modelist(struct mxc_hdmi *hdmi)
+ */
+ mode = &hdmi->fbi->monspecs.modedb[i];
+
+- if (!(mode->vmode & FB_VMODE_INTERLACED) &&
+- (mxc_edid_mode_to_vic(mode) != 0)) {
++ if (!(mode->vmode & FB_VMODE_INTERLACED)) {
++ int vic = mxc_edid_mode_to_vic(mode);
+
+- dev_dbg(&hdmi->pdev->dev, "Added mode %d:", i);
++ dev_info(&hdmi->pdev->dev, "%s: Added mode %d(VIC %u):", __func__, i, vic);
+ dev_dbg(&hdmi->pdev->dev,
+ "xres = %d, yres = %d, freq = %d, vmode = %d, flag = %d\n",
+ hdmi->fbi->monspecs.modedb[i].xres,
diff --git a/recipes-kernel/linux/linux-imx_3.0.35.bbappend b/recipes-kernel/linux/linux-imx_3.0.35.bbappend
index dca3b92..c0b4181 100644
--- a/recipes-kernel/linux/linux-imx_3.0.35.bbappend
+++ b/recipes-kernel/linux/linux-imx_3.0.35.bbappend
@@ -1,6 +1,6 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
-PRINC := "${@int(PRINC) + 5}"
+PRINC := "${@int(PRINC) + 6}"
# FIXME: Congatec qmx6 support is based on 3.0.35-4.0.0
SRCREV_cgtqmx6 = "535af2fbee4d90ef1e5e75ffb25d8229d7480b32"
@@ -14,3 +14,24 @@ SRC_URI_cgtqmx6 = "git://git.freescale.com/imx/linux-2.6-imx.git \
file://0006-ENGR00265130-gpu-Correct-section-mismatch-in-gpu-ker.patch \
file://drm-vivante-Add-00-sufix-in-returned-bus-Id.patch \
file://cgtqmx6/0001-Add-linux-support-for-congatec-evaluation-board-qmx6q.patch"
+
+# Support for the SolidRun HummingBoard (also known as the Carrier One or C1)
+FILESEXTRAPATHS_prepend_hummingboard := "${THISDIR}/${PN}-${PV}/hummingboard:"
+SRCREV_hummingboard = "bdde708ebfde4a8c1d3829578d3f6481a343533a"
+SRC_URI_hummingboard = "git://git.freescale.com/imx/linux-2.6-imx.git;branch=imx_3.0.35_4.1.0 \
+ file://drm-vivante-Add-00-sufix-in-returned-bus-Id.patch \
+ file://epdc-Rename-mxcfb_epdc_kernel.h-to-mxc_epdc.h.patch \
+ file://0001-perf-tools-Fix-getrusage-related-build-failure-on-gl.patch \
+ file://0002-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch \
+ file://0003-ARM-7670-1-fix-the-memset-fix.patch \
+ file://0004-ENGR00271136-Fix-build-break-when-CONFIG_CLK_DEBUG-i.patch \
+ file://0005-ENGR00271359-Add-Multi-touch-support.patch \
+ file://0006-Add-support-for-DVI-monitors.patch \
+ file://0007-ARM-mach-mx6-board-mx6q_sabresd-Register-SDHC3-first.patch \
+ file://0001-SolidRun-i.MX6-based-carrier-one-base.patch \
+ file://0002-SolidRun-Carrier-One-board-support.patch \
+ file://0003-LVDS-on-LDB_SEP1.patch \
+ file://0004-Added-Carrier-One-C1-to-imx6_defconfig.patch \
+ file://mxc_hdmi-dont-require-cea-mode.patch \
+ file://defconfig"
+
--
1.8.5.2
More information about the meta-freescale
mailing list