[meta-freescale] [meta-fsl-arm][PATCH 3/4] pcl052: Add machine definition

Fri Feb 28 04:07:39 PST 2014

> -----Original Message-----
> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> bounces at yoctoproject.org] On Behalf Of Otavio Salvador
> Sent: Thursday, February 27, 2014 5:37 PM
> To: Anthony Felice
> Cc: meta-freescale at yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH 3/4] pcl052: Add machine
> definition
> 
> On Thu, Feb 27, 2014 at 3:47 PM, Anthony Felice <tony.felice at timesys.com>
> wrote:
> > Add machine definition for the Phytec Cosmic Vybrid board.
> >
> > Signed-off-by: Anthony Felice <tony.felice at timesys.com>
> 
> This is not a Freescale reference board so ought to be in -extra.
> 
> Please also check our Documentation project and add the corresponding
> Documentation updates.

Ops, Thanks a lot, Otavio! I completely forgot about #RN!

Anthony, please take a look in this email [1] in order to guide yourself on how to change docs

[1] http://article.gmane.org/gmane.linux.embedded.yocto.meta-freescale/6816

Regards,
Daiane

> 
> > ---
> >  conf/machine/pcl052.conf                           |  22 +++
> >  .../linux/linux-timesys-3.0.15/pcl052/defconfig    | 168
> +++++++++++++++++++++
> >  recipes-kernel/linux/linux-timesys_3.0.15.bb       |   2 +
> >  3 files changed, 192 insertions(+)
> >  create mode 100644 conf/machine/pcl052.conf  create mode 100644
> > recipes-kernel/linux/linux-timesys-3.0.15/pcl052/defconfig
> >
> > diff --git a/conf/machine/pcl052.conf b/conf/machine/pcl052.conf new
> > file mode 100644 index 0000000..611e93d
> > --- /dev/null
> > +++ b/conf/machine/pcl052.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: Phytec Cosmic Vybrid Development Kit
> > +#@SOC: vf60
> > +#@DESCRIPTION: Machine configuration for Phytec Cosmic Vybrid
> > +Development Kit
> > +#@MAINTAINER: Anthony Felice <tony.felice at timesys.com>
> > +
> > +include conf/machine/include/imx-base.inc include
> > +conf/machine/include/tune-cortexa5.inc
> > +
> > +SOC_FAMILY = "vf60"
> > +
> > +PREFERRED_PROVIDER_virtual/kernel = "linux-timesys"
> > +PREFERRED_PROVIDER_u-boot = "u-boot-timesys"
> > +
> > +UBOOT_MACHINE = "pcl052_config"
> > +
> > +SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
> > +IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard"
> > +
> > +SERIAL_CONSOLE = "115200 ttymxc1"
> > +
> > +MACHINE_FEATURES = "apm usbgadget usbhost vfat alsa"
> > diff --git
> > a/recipes-kernel/linux/linux-timesys-3.0.15/pcl052/defconfig
> > b/recipes-kernel/linux/linux-timesys-3.0.15/pcl052/defconfig
> > new file mode 100644
> > index 0000000..3b6f1a6
> > --- /dev/null
> > +++ b/recipes-kernel/linux/linux-timesys-3.0.15/pcl052/defconfig
> 
> This ought to be another commit (before machine addition).
> 
> > @@ -0,0 +1,168 @@
> > +CONFIG_EXPERIMENTAL=y
> > +CONFIG_LOCALVERSION="-3.0-mvf+yocto"
> > +CONFIG_SYSVIPC=y
> > +CONFIG_IKCONFIG=y
> > +CONFIG_IKCONFIG_PROC=y
> > +CONFIG_LOG_BUF_SHIFT=14
> > +CONFIG_EMBEDDED=y
> > +# CONFIG_PERF_EVENTS is not set
> > +CONFIG_PROFILING=y
> > +CONFIG_MODULES=y
> > +CONFIG_MODULE_UNLOAD=y
> > +CONFIG_MODULE_FORCE_UNLOAD=y
> > +CONFIG_MODVERSIONS=y
> > +# CONFIG_BLK_DEV_BSG is not set
> > +CONFIG_ARCH_MXC=y
> > +CONFIG_ARCH_MVF=y
> > +CONFIG_MACH_PCL052=y
> > +CONFIG_MXC_PWM=m
> > +CONFIG_MXC_USE_PIT=y
> > +CONFIG_DMA_ZONE_SIZE=16
> > +# CONFIG_CACHE_L2X0 is not set
> > +CONFIG_ARM_ERRATA_743622=y
> > +CONFIG_ARM_ERRATA_754322=y
> > +CONFIG_HIGH_RES_TIMERS=y
> > +CONFIG_VMSPLIT_2G=y
> > +CONFIG_AEABI=y
> > +# CONFIG_OABI_COMPAT is not set
> > +CONFIG_COMPACTION=y
> > +CONFIG_KSM=y
> > +CONFIG_ZBOOT_ROM_TEXT=0x0
> > +CONFIG_ZBOOT_ROM_BSS=0x0
> > +CONFIG_CMDLINE="root=/dev/nfs rw
> nfsroot=10.193.20.106:/tftpboot/10.193.20.115
> ip=10.193.20.115:10.193.20.106:10.193.20.254:255.255.255.0::eth0:off
> console=ttymxc1,115200 mem=128M"
> > +CONFIG_VFP=y
> > +CONFIG_NEON=y
> > +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is
> > +not set CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y
> > +CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y
> > +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not
> > +set # CONFIG_IPV6 is not set
> > +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> > +CONFIG_DEVTMPFS=y
> > +CONFIG_DEVTMPFS_MOUNT=y
> > +CONFIG_MTD=y
> > +CONFIG_MTD_CMDLINE_PARTS=y
> > +CONFIG_MTD_CHAR=y
> > +CONFIG_MTD_BLOCK=y
> > +CONFIG_MTD_NAND=y
> > +CONFIG_MTD_NAND_FSL_NFC=y
> > +CONFIG_MTD_NAND_FSL_NFC_SWECC=y
> > +CONFIG_BLK_DEV_RAM=y
> > +CONFIG_MISC_DEVICES=y
> > +CONFIG_MVF_ADC=y
> > +CONFIG_EEPROM_AT24=y
> > +CONFIG_SCSI=y
> > +CONFIG_BLK_DEV_SD=y
> > +CONFIG_SCSI_MULTI_LUN=y
> > +# CONFIG_SCSI_LOWLEVEL is not set
> > +CONFIG_NETDEVICES=y
> > +CONFIG_MICREL_PHY=y
> > +CONFIG_NET_ETHERNET=y
> > +CONFIG_FEC1=y
> > +# CONFIG_NETDEV_1000 is not set
> > +# CONFIG_NETDEV_10000 is not set
> > +CONFIG_INPUT_POLLDEV=y
> > +CONFIG_INPUT_EVDEV=y
> > +CONFIG_KEYBOARD_GPIO=y
> > +# CONFIG_INPUT_MOUSE is not set
> > +CONFIG_INPUT_TOUCHSCREEN=y
> > +CONFIG_INPUT_MISC=y
> > +CONFIG_INPUT_UINPUT=y
> > +# CONFIG_CONSOLE_TRANSLATIONS is not set # CONFIG_LEGACY_PTYS is not
> > +set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y
> > +CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y
> > +CONFIG_SPI=y CONFIG_SPI_MVF_QSPI=m CONFIG_SPI_MVF=m
> > +CONFIG_SPI_SPIDEV=m CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set
> > +CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y # CONFIG_MFD_MXC_HDMI is not set
> > +CONFIG_FB=y CONFIG_FB_MVF_DCU=y CONFIG_MVF_TDA_998X=y
> > +CONFIG_FRAMEBUFFER_CONSOLE=y
> > +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> > +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> > +CONFIG_FONTS=y
> > +CONFIG_FONT_8x8=y
> > +CONFIG_FONT_8x16=y
> > +CONFIG_LOGO=y
> > +CONFIG_SOUND=y
> > +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=y
> > +CONFIG_SND_PCM_OSS=y CONFIG_SND_SOC=y #
> > +CONFIG_SND_SOC_PCM052_SGTL5000 is not set # CONFIG_HID_SUPPORT is not
> > +set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ARC=y
> > +CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y
> > +CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y
> > +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y
> > +CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y
> > +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y
> > +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y
> > +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> > +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y #
> > +CONFIG_MXC_HMP4E is not set # CONFIG_MXC_HWEVENT is not set
> > +CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED
> > +is not set CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y
> > +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y
> > +CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y
> > +CONFIG_PARTITION_ADVANCED=y CONFIG_EFI_PARTITION=y
> > +CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=y
> > +CONFIG_NLS_UTF8=m CONFIG_FTRACE=y CONFIG_ENABLE_DEFAULT_TRACERS=y
> > +CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_ECB=y
> > +CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ARC4=y
> > +CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y #
> > +CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=m
> > diff --git a/recipes-kernel/linux/linux-timesys_3.0.15.bb
> > b/recipes-kernel/linux/linux-timesys_3.0.15.bb
> > index 4c28f11..bc8b077 100644
> > --- a/recipes-kernel/linux/linux-timesys_3.0.15.bb
> > +++ b/recipes-kernel/linux/linux-timesys_3.0.15.bb
> > @@ -13,6 +13,8 @@ SRC_URI_append_twr-vf65gs10 =
> > "file://0001-mvf_fec.c-Fix-mac-address-read-to-mat
> >
> >  SRCBRANCH_twr-vf65gs10 = "3.0.15_vybrid-twr"
> >  SRCREV_twr-vf65gs10 = "50c4c848d6b8743894cfcec166db475ef6140504"
> > +SRCBRANCH_pcl052 = "3.0-pcl052"
> > +SRCREV_pcl052 = "655f7949b5fd0b66bde03fc3c63c7a436353b1e1"
> >  LOCALVERSION = "-3.0-mvf+yocto"
> >
> >  COMPATIBLE_MACHINE = "(vf60)"
> > --
> > 1.9.0
> >
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> 
> 
> 
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
> 