[meta-freescale] [meta-fsl-arm] X11 on i.MX6 with 3.10 kernel

[Otavio Salvador]

Hello Gary,

On Thu, Feb 6, 2014 at 10:29 AM, Gary Thomas <gary at mlbassoc.com> wrote:
> I've noticed quite a lot of activity with the new kernel (3.10.17)
> recently so I thought I'd give it a go.  I built my normal X11 based
> system for my SabreLite, overriding the kernel to be 3.10+
>
> For the record, I built using these layers (plus my own local distro layer)
> meta              = "master:4e9eb77108c7e628ebd00ec848b8bc034802e197"
> meta-fsl-arm      = "master:c43d781a35f148fe5267261d7f634d51a8ad647c"
> meta-fsl-arm-extra = "master:745e6b99edb94672edf0c1377a69b5fc03ab1a35"
>
> I was happily surprised when it came right up, found my camera (so
> far not tested).  Sadly, X11 didn't start with the attached log messages.
>
> Is this the kernel vs GPU firmware mismatch I read about last week?
> What needs to be done to get this going?

In fact you must to use master-next branches as those includes the new
GPU drivers. From your log, this seems to be the missing part.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750