[meta-freescale] [meta-fsl-arm-extra][PATCH] linux-boundary (3.10.17): Bump SRCREV to 4e13da7

[Otavio Salvador]

Hello Ian,

On Fri, Dec 12, 2014 at 5:53 PM, Ian Coolidge <ian at boundarydevices.com> wrote:
> Highlights include:
>    Add kernel configuration for Qt For Device creation
>       See http://www.qt.io/qt-for-device-creation/
>    Add support for new Nitrogen6_VM board, a low-cost SBC designed
>       for use in player tracking applications
>    Add -nolcd variants of Nitrogen6X, SABRE Lite, Nitrogen6_Max
>       See http://boundarydevices.com/mx6-device-tree-customization/
>    Fixed HDMI video support for TO 1.0 (Gary Bisson)
>    Fix Step focus on OV5640 MIPI cameras
>    Add support for KOE (nee Hitachi) HVGA display
>    Add support for headphone mute on sgtl5000
>    Add support for LSA40AT9001 panel
>    Add support for reading/writing OV5640 MIPI register
>    Removed support for TC358743 HDMI->mipi, ADV7391 in stock DTBs
>    Added support for custom boards vp and insp.
>    Add calibration support for the AR1020-i2c touch controller
>
> Detailed change list:
>    4ed13da Add nitrogen6x_qt5_defconfig for to match Qt for Device Creation
>    b927fa4 ARM: DTS: nitrogen6_vm: disable pull-up on 4/5-wire detect pin
>    f169275 ARM: DTS: nitrogen6_vm: add support for old (FM24C512) FRAM part
>    1c57761 ARM: DTS: nitrogen6_vm: move HDMI to IPU0/DI1 to allow use with LCD
>    d29d96f imx6qdl-nitrogen6_vm.dtsi: GP_VM_GPIO_n are bidirectional
>    f6988c9 imx6qdl-nitrogen6_vm.dtsi: GPIO_2 is irq for ar1020,
>    474eec3 AR1020-i2c: Add calibration parameter
>    da9512d ARM: DTS: nitrogen6_vm: fix AR1020 touch screen, remove others
>    088d96f ARM: DTS: nitrogen6_vm: add AR1020 touch screen
>    9394beb ARM: dts: mx6qdl-boundary-nolcd: Add GPIO5:9 on DISP0_DAT15
>    cf66771 mxc_lcdif: add panel hitachi_hvga
>    393dfd6 imx6qdl-nitrogen6_vm.dtsi: initial addition
>    7cddbd3 imx6qdl-nit6xlite.dtsi: rearrange nodes
>    885b4cd nitrogen6_vm_defconfig: initial addition
>    fe60212 vp_defconfig: use RV4162 for rtc
>    540a956 usb: phy: mxs: change test clock gating on connection/disconnection
>    052e8cc imx6qdl-vp.dtsi: add reg_usbh1_vbus
>    2e4da72 imx6qdl-per.dtsi: add reference to pinctrl_usbh1
>    fa2d686 imx6qdl-insp.dtsi: add reg_usbh1_vbus
>    861c15f imx6qdl-bt.dtsi: add reference to pinctrl_usbh1
>    e3dad35 imx6qdl-vp.dtsi: fix hdmi ipu for both lcd and hdmi together
>    03d70b5 adv7180: don't change mode without lock
>    7cd8838 insp_defconfig: initial addition
>    4472f69 imx-sgtl5000: add mute_gpio for headphone
>    3828c8a i2c-mux-gpio: use subsys_initcall
>    ca0f353 imx6q-insp.dts: initial addition
>    3d0895d mxc_lcdif: add LSA40AT9001 panel
>    5f3c68c ov5640_mipi: use registers 0x3602-3603 for step focus
>    97d433b ov5640_mipi: add support for reading/writing I2C registers
>    3a652fd ARM: clk-imx6q: fix video divider for revision 1.0 of i.MX6q
>    185034b ARM: dt: nitrogen6_max: Add -nolcd variant to expose extra I/O
>    85a3fe1 ARM: dt: nitrogen6x: Add -nolcd variant to expose extra I/O
>    d620a3c ARM: dt: nitrogen6_max: add aliases for lcd, backlight and TSC2004
>    0970ed8 ARM: dt: nitrogen6x: add aliases for lcd and backlight
>    138276df imx6qdl-sabrelite-nolcd: move the -nolcd updates into an include
>    ea2ae98 imx6qdl-sabrelite-nolcd: re-work to override the DTB with LCD
>    f9a00cb imx6qdl-sabrelite: add aliases for lcd, backlight_lcd, and tsc2004
>    be49e13 imx6qdl-sabrelite-nolcd: sync with standard imx6qdl-sabrelite
>    4179f23 nitrogen6_max: remove extraneous '#if 0' in LCD driver
>    9dfd90c nitrogen6x: remove extraneous '#if 0' in LCD driver
>    ae0a475 sabrelite: remove extraneous '#if 0' in LCD driver
>    945d7bd imx6qdl-nitrogen6x: Don't support TC358743_mipi in stock Nitrogen6x
>    f86ff4a imx6q-sabrelite: Don't support TC358743_mipi in stock SABRE Lite DTB
>    b5fb9b0 imx6qdl-nitrogen6x: Don't support MIPI DSI in stock Nitrogen6x DTB
>    c4fab9c imx6q-sabrelite: Don't support MIPI DSI in stock SABRE Lite DTB
>    0029d96 imx6qdl-nitrogen6x: Don't support ADV7391 in stock Nitrogen6x DTB
>    f163fc4 imx6q-sabrelite: Don't support ADV7391 in stock SABRE Lite DTB
>    ed21956 nitrogen6x: Don't support ADV7180 in standard Nitrogen6X DTB
>    881a82d imx6q-sabrelite: Don't support ADV7180 on SABRE Lite
>    8f069e6 nit6xlite_defconfig: clean up unsupported options
>
> Signed-off-by: Ian Coolidge <ian at boundarydevices.com>

Thanks for the patch and the detailed commit log. The only remark for
your next patch is the subject prefix.

This patch is not intended for master but Dizzy so please use the
proper subject prefix next time as it easy the work for us :)

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750