[meta-freescale] Updates of meta-fsl-ppc master branch in 2014-09-26

[zhenhua.luo at freescale.com]

Resend another email with correct date, sorry for the noise.


Best Regards,

Zhenhua

From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-bounces at yoctoproject.org] On Behalf Of zhenhua.luo at freescale.com
Sent: Friday, December 05, 2014 9:59 AM
To: meta-freescale at yoctoproject.org
Subject: [meta-freescale] Updates of meta-fsl-ppc master branch in 2014-09-26


Hello all,



The following updates are merged in master branch of meta-fsl-ppc, thanks.

commit 486a72425f2f6e25efd9bfdbb9638fb58e90a85f
Author: Bob Cochran <yocto at mindchasers.com<mailto:yocto at mindchasers.com>>
Date:   Thu Nov 13 23:05:20 2014 -0500

    linux-qoriq: change defconfig for T1040 to match number of cpus

    Having a number higher than necessary for NR_CPUS wastes memory by
    instantiating unnecessary structures in RAM.  An example is in the DPAA
    where DPAA_ETH_TX_QUEUES is defined based on NR_CPUS and used to create
    dozens of extra qman_fq structures.  Using the prior value of 24, which
    was left over from the T4240 created an additonal 60 frame queue
    structures alone.

    This has been tested on t1040rdb-64b.

    Signed-off-by: Bob Cochran <yocto at mindchasers.com<mailto:yocto at mindchasers.com>>

commit aeb28ed76b764b3fd18a43aeb3ae93e76d51bf43
Author: Bob Cochran <yocto at mindchasers.com<mailto:yocto at mindchasers.com>>
Date:   Thu Nov 13 22:56:20 2014 -0500

    linux-qoriq: Configure T1040 for FMAN V3

    Although the flag existed in Kconfig for FMAN_V3L, it was not set by
    default.  Also, the T1040 and FMAN V3L only support four O/H ports, so
    remove the last two from the DTS files.  Otherwise, MAJOR FM Errors
    will be reported during FMAN probing / init.

    This was tested on t1040rdb-64b

    Signed-off-by: Bob Cochran <yocto at mindchasers.com<mailto:yocto at mindchasers.com>>

commit a3c2f73d889150456e5611bf76122c8444b2d437
Author: Bob Cochran <yocto at mindchasers.com<mailto:yocto at mindchasers.com>>
Date:   Thu Nov 13 22:55:23 2014 -0500

    linux-qoriq: Remove Altivec from T1040 64-bit defconfig

    T1040 uses an E5500 processor, and E5500 doesn't have an Altivec unit

    This was tested on a t1040rdb

    Signed-off-by: Bob Cochran <yocto at mindchasers.com<mailto:yocto at mindchasers.com>>


Best Regards,

Zhenhua
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20141205/ae2b54a0/attachment.html>