[meta-freescale] [PATCH 1/2][dizzy-next] linux-imx: remove unnecessary patches for 3.10.17-1.0.2
Gary Bisson
bisson.gary at gmail.com
Wed Dec 3 09:07:26 PST 2014
Those have been removed from the recipe by Laurent Post:
438d4438: linux-imx: Upgrade to 3.10.17-1.0.2 patch release
Signed-off-by: Gary Bisson <bisson.gary at gmail.com>
---
...8-ARM-imx6sl-gpc-add-chip-revision-check-.patch | 52 -
...2-regulator-pfuze100-Fix-address-of-FABID.patch | 36 -
...3-regulator-pfuze100-add-pfuze200-support.patch | 506 --------
...fuze100-Add-terminate-entry-for-i2c-of-_d.patch | 61 -
...fuze100-Add-PFUZE200-support-to-Kconfig-a.patch | 56 -
...gulator-pfuze100-Use-of_get_child_by_name.patch | 34 -
...ze100-regulator-Fix-of_node_get-parameter.patch | 44 -
...8-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch | 752 ------------
...8-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch | 1202 --------------------
...2-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch | 133 ---
10 files changed, 2876 deletions(-)
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch
delete mode 100644 recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch b/recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch
deleted file mode 100644
index 962a804..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0001-ENGR00309838-ARM-imx6sl-gpc-add-chip-revision-check-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 5dad39098c3c8686f23db638505bf00ae2cc092f Mon Sep 17 00:00:00 2001
-From: Robby Cai <r63905 at freescale.com>
-Date: Fri, 23 May 2014 16:02:13 +0800
-Subject: [PATCH 01/10] ENGR00309838 ARM: imx6sl: gpc: add chip revision check
- for dispmix
-Organization: O.S. Systems Software LTDA.
-
-The dispmix feature works without problem since TO1.2.
-This patch adds the back-compatibility for older chip.
-
-Signed-off-by: Robby Cai <r63905 at freescale.com>
-(cherry picked from commit a187b916d55052fed10de1797009250095b598fb)
-
-Upstream-Status: Pending
----
- arch/arm/mach-imx/gpc.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
-index 9734327..25e987c 100644
---- a/arch/arm/mach-imx/gpc.c
-+++ b/arch/arm/mach-imx/gpc.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright 2011-2013 Freescale Semiconductor, Inc.
-+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
-@@ -90,7 +90,8 @@ static void imx_disp_clk(bool enable)
-
- static void imx_gpc_dispmix_on(void)
- {
-- if (cpu_is_imx6sl()) {
-+ if (cpu_is_imx6sl() &&
-+ imx_get_soc_revision() >= IMX_CHIP_REVISION_1_2) {
- imx_disp_clk(true);
-
- writel_relaxed(0x0, gpc_base + GPC_PGC_DISP_PGCR_OFFSET);
-@@ -105,7 +106,8 @@ static void imx_gpc_dispmix_on(void)
-
- static void imx_gpc_dispmix_off(void)
- {
-- if (cpu_is_imx6sl()) {
-+ if (cpu_is_imx6sl() &&
-+ imx_get_soc_revision() >= IMX_CHIP_REVISION_1_2) {
- imx_disp_clk(true);
-
- writel_relaxed(0xFFFFFFFF,
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch b/recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch
deleted file mode 100644
index ff36488..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0002-regulator-pfuze100-Fix-address-of-FABID.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From a38734076be8b4fbb1a9db757e1a69dddef61f63 Mon Sep 17 00:00:00 2001
-From: Axel Lin <axel.lin at ingics.com>
-Date: Mon, 9 Dec 2013 15:24:19 +0800
-Subject: [PATCH 02/10] regulator: pfuze100: Fix address of FABID
-Organization: O.S. Systems Software LTDA.
-
-According to the datasheet, the address of FABID is 0x4. Fix it.
-
-Signed-off-by: Axel Lin <axel.lin at ingics.com>
-Acked-by: Robin Gong <b38343 at freescale.com>
-Signed-off-by: Mark Brown <broonie at linaro.org>
-Cc: stable at vger.kernel.org
-(cherry picked from commit c07a24939f36fb6de522a9726369ea64eee5d98d)
-(cherry picked from commit cfec286ff9f375c2c289072d63cedbb0c7917a48)
-
-Upstream-Status: Pending
----
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
-index ba67b2c..565a631 100644
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -38,7 +38,7 @@
-
- #define PFUZE100_DEVICEID 0x0
- #define PFUZE100_REVID 0x3
--#define PFUZE100_FABID 0x3
-+#define PFUZE100_FABID 0x4
-
- #define PFUZE100_SW1ABVOL 0x20
- #define PFUZE100_SW1CVOL 0x2e
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch b/recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch
deleted file mode 100644
index 923da0a..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0003-regulator-pfuze100-add-pfuze200-support.patch
+++ /dev/null
@@ -1,506 +0,0 @@
-From 08284f19c7cfdf84332c8098204f6e7fad368308 Mon Sep 17 00:00:00 2001
-From: Robin Gong <b38343 at freescale.com>
-Date: Tue, 4 Mar 2014 17:40:36 +0800
-Subject: [PATCH 03/10] regulator: pfuze100: add pfuze200 support
-Organization: O.S. Systems Software LTDA.
-
-support pfuze200 chip which remove SW1C and SW4 based on pfuze100.
-
-Signed-off-by: Robin Gong <b38343 at freescale.com>
-Signed-off-by: Mark Brown <broonie at linaro.org>
-(cherry picked from commit f2518480c7b744296a5587990a54e3a284d932b8)
-
-Conflicts:
-
- drivers/regulator/pfuze100-regulator.c
-(cherry picked from commit f9e62732cfb59ff68fed303bbbb3913d2f1002bf)
-
-Upstream-Status: Pending
----
- .../devicetree/bindings/regulator/pfuze100.txt | 96 ++++++++++-
- drivers/regulator/pfuze100-regulator.c | 181 ++++++++++++++++-----
- include/linux/regulator/pfuze100.h | 14 ++
- 3 files changed, 245 insertions(+), 46 deletions(-)
-
-diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
-index fc989b2..34ef5d1 100644
---- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
-+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
-@@ -1,7 +1,7 @@
- PFUZE100 family of regulators
-
- Required properties:
--- compatible: "fsl,pfuze100"
-+- compatible: "fsl,pfuze100" or "fsl,pfuze200"
- - reg: I2C slave address
-
- Required child node:
-@@ -10,11 +10,14 @@ Required child node:
- Documentation/devicetree/bindings/regulator/regulator.txt.
-
- The valid names for regulators are:
-+ --PFUZE100
- sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
-+ --PFUZE200
-+ sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
-
- Each regulator is defined using the standard binding for regulators.
-
--Example:
-+Example 1: PFUZE100
-
- pmic: pfuze100 at 08 {
- compatible = "fsl,pfuze100";
-@@ -113,3 +116,92 @@ Example:
- };
- };
- };
-+
-+
-+Example 2: PFUZE200
-+
-+ pmic: pfuze200 at 08 {
-+ compatible = "fsl,pfuze200";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
-index 565a631..35b1de1 100644
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -56,6 +56,8 @@
- #define PFUZE100_VGEN5VOL 0x70
- #define PFUZE100_VGEN6VOL 0x71
-
-+enum chips {PFUZE100, PFUZE200, PFUZE_NUM};
-+
- struct pfuze_regulator {
- struct regulator_desc desc;
- unsigned char stby_reg;
-@@ -63,6 +65,7 @@ struct pfuze_regulator {
- };
-
- struct pfuze_chip {
-+ int chip_id;
- struct regmap *regmap;
- struct device *dev;
- struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
-@@ -77,15 +80,15 @@ static const int pfuze100_vsnvs[] = {
- 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
- };
-
--static const struct i2c_device_id pfuze_device_id[] = {
-- {.name = "pfuze100"},
-- {},
-+static const struct i2c_device_id pfuze_device_id[PFUZE_NUM] = {
-+ {.name = "pfuze100", .driver_data = PFUZE100},
-+ {.name = "pfuze200", .driver_data = PFUZE200},
- };
- MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
-
--static const struct of_device_id pfuze_dt_ids[] = {
-- { .compatible = "fsl,pfuze100" },
-- {},
-+static const struct of_device_id pfuze_dt_ids[PFUZE_NUM] = {
-+ { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
-+ { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
- };
- MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
-
-@@ -139,14 +142,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
-
- };
-
--#define PFUZE100_FIXED_REG(_name, base, voltage) \
-- [PFUZE100_ ## _name] = { \
-+#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \
-+ [_chip ## _ ## _name] = { \
- .desc = { \
- .name = #_name, \
- .n_voltages = 1, \
- .ops = &pfuze100_fixed_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
-- .id = PFUZE100_ ## _name, \
-+ .id = _chip ## _ ## _name, \
- .owner = THIS_MODULE, \
- .min_uV = (voltage), \
- .enable_reg = (base), \
-@@ -154,14 +157,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
- }, \
- }
-
--#define PFUZE100_SW_REG(_name, base, min, max, step) \
-- [PFUZE100_ ## _name] = { \
-+#define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \
-+ [_chip ## _ ## _name] = { \
- .desc = { \
- .name = #_name,\
- .n_voltages = ((max) - (min)) / (step) + 1, \
- .ops = &pfuze100_sw_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
-- .id = PFUZE100_ ## _name, \
-+ .id = _chip ## _ ## _name, \
- .owner = THIS_MODULE, \
- .min_uV = (min), \
- .uV_step = (step), \
-@@ -172,14 +175,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
- .stby_mask = 0x3f, \
- }
-
--#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
-- [PFUZE100_ ## _name] = { \
-+#define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \
-+ [_chip ## _ ## _name] = { \
- .desc = { \
- .name = #_name, \
- .n_voltages = ARRAY_SIZE(voltages), \
- .ops = &pfuze100_swb_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
-- .id = PFUZE100_ ## _name, \
-+ .id = _chip ## _ ## _name, \
- .owner = THIS_MODULE, \
- .volt_table = voltages, \
- .vsel_reg = (base), \
-@@ -187,14 +190,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
- }, \
- }
-
--#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
-- [PFUZE100_ ## _name] = { \
-+#define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \
-+ [_chip ## _ ## _name] = { \
- .desc = { \
- .name = #_name, \
- .n_voltages = ((max) - (min)) / (step) + 1, \
- .ops = &pfuze100_ldo_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
-- .id = PFUZE100_ ## _name, \
-+ .id = _chip ## _ ## _name, \
- .owner = THIS_MODULE, \
- .min_uV = (min), \
- .uV_step = (step), \
-@@ -207,25 +210,45 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
- .stby_mask = 0x20, \
- }
-
-+/* PFUZE100 */
- static struct pfuze_regulator pfuze100_regulators[] = {
-- PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
-- PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
-- PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
-- PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
-- PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
-- PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
-- PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
-- PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
-- PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
-- PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
-- PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
-- PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
-- PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
-- PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
-- PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
-+ PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
-+ PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
-+ PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
-+ PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000),
-+ PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
-+};
-+
-+static struct pfuze_regulator pfuze200_regulators[] = {
-+ PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
-+ PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
-+ PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
-+ PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000),
-+ PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
- };
-
-+static struct pfuze_regulator *pfuze_regulators;
-+
- #ifdef CONFIG_OF
-+/* PFUZE100 */
- static struct of_regulator_match pfuze100_matches[] = {
- { .name = "sw1ab", },
- { .name = "sw1c", },
-@@ -244,6 +267,26 @@ static struct of_regulator_match pfuze100_matches[] = {
- { .name = "vgen6", },
- };
-
-+/* PFUZE200 */
-+static struct of_regulator_match pfuze200_matches[] = {
-+
-+ { .name = "sw1ab", },
-+ { .name = "sw2", },
-+ { .name = "sw3a", },
-+ { .name = "sw3b", },
-+ { .name = "swbst", },
-+ { .name = "vsnvs", },
-+ { .name = "vrefddr", },
-+ { .name = "vgen1", },
-+ { .name = "vgen2", },
-+ { .name = "vgen3", },
-+ { .name = "vgen4", },
-+ { .name = "vgen5", },
-+ { .name = "vgen6", },
-+};
-+
-+static struct of_regulator_match *pfuze_matches;
-+
- static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
- {
- struct device *dev = chip->dev;
-@@ -260,8 +303,20 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
- return -EINVAL;
- }
-
-- ret = of_regulator_match(dev, parent, pfuze100_matches,
-- ARRAY_SIZE(pfuze100_matches));
-+ switch (chip->chip_id) {
-+ case PFUZE200:
-+ pfuze_matches = pfuze200_matches;
-+ ret = of_regulator_match(dev, parent, pfuze200_matches,
-+ ARRAY_SIZE(pfuze200_matches));
-+ break;
-+
-+ case PFUZE100:
-+ default:
-+ pfuze_matches = pfuze100_matches;
-+ ret = of_regulator_match(dev, parent, pfuze100_matches,
-+ ARRAY_SIZE(pfuze100_matches));
-+ break;
-+ }
-
- of_node_put(parent);
- if (ret < 0) {
-@@ -275,12 +330,12 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
-
- static inline struct regulator_init_data *match_init_data(int index)
- {
-- return pfuze100_matches[index].init_data;
-+ return pfuze_matches[index].init_data;
- }
-
- static inline struct device_node *match_of_node(int index)
- {
-- return pfuze100_matches[index].of_node;
-+ return pfuze_matches[index].of_node;
- }
- #else
- static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
-@@ -308,7 +363,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
- if (ret)
- return ret;
-
-- if (value & 0x0f) {
-+ if ((value & 0x0f) != pfuze_chip->chip_id) {
-+ /* device id NOT match with your setting */
- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
- return -ENODEV;
- }
-@@ -344,17 +400,31 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
- dev_get_platdata(&client->dev);
- struct regulator_config config = { };
- int i, ret;
-+ const struct of_device_id *match;
-+ u32 regulator_num;
-+ u32 sw_check_start, sw_check_end;
-
- pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
- GFP_KERNEL);
- if (!pfuze_chip)
- return -ENOMEM;
-
-- i2c_set_clientdata(client, pfuze_chip);
--
-- memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
-- sizeof(pfuze_chip->regulator_descs));
-+ if (client->dev.of_node) {
-+ match = of_match_device(of_match_ptr(pfuze_dt_ids),
-+ &client->dev);
-+ if (!match) {
-+ dev_err(&client->dev, "Error: No device match found\n");
-+ return -ENODEV;
-+ }
-+ pfuze_chip->chip_id = (int)(long)match->data;
-+ } else if (id) {
-+ pfuze_chip->chip_id = id->driver_data;
-+ } else {
-+ dev_err(&client->dev, "No dts match or id table match found\n");
-+ return -ENODEV;
-+ }
-
-+ i2c_set_clientdata(client, pfuze_chip);
- pfuze_chip->dev = &client->dev;
-
- pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
-@@ -371,11 +441,34 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
- return ret;
- }
-
-+ /* use the right regulators after identify the right device */
-+ switch (pfuze_chip->chip_id) {
-+ case PFUZE200:
-+ pfuze_regulators = pfuze200_regulators;
-+ regulator_num = ARRAY_SIZE(pfuze200_regulators);
-+ sw_check_start = PFUZE200_SW2;
-+ sw_check_end = PFUZE200_SW3B;
-+ break;
-+
-+ case PFUZE100:
-+ default:
-+ pfuze_regulators = pfuze100_regulators;
-+ regulator_num = ARRAY_SIZE(pfuze100_regulators);
-+ sw_check_start = PFUZE100_SW2;
-+ sw_check_end = PFUZE100_SW4;
-+ break;
-+ }
-+ dev_info(&client->dev, "pfuze%s found.\n",
-+ (pfuze_chip->chip_id == PFUZE100) ? "100" : "200");
-+
-+ memcpy(pfuze_chip->regulator_descs, pfuze_regulators,
-+ sizeof(pfuze_chip->regulator_descs));
-+
- ret = pfuze_parse_regulators_dt(pfuze_chip);
- if (ret)
- return ret;
-
-- for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
-+ for (i = 0; i < regulator_num; i++) {
- struct regulator_init_data *init_data;
- struct regulator_desc *desc;
- int val;
-@@ -388,7 +481,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
- init_data = match_init_data(i);
-
- /* SW2~SW4 high bit check and modify the voltage value table */
-- if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
-+ if (i >= sw_check_start && i <= sw_check_end) {
- regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
- if (val & 0x40) {
- desc->min_uV = 800000;
-diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
-index 65d550b..364f7a7 100644
---- a/include/linux/regulator/pfuze100.h
-+++ b/include/linux/regulator/pfuze100.h
-@@ -35,6 +35,20 @@
- #define PFUZE100_VGEN6 14
- #define PFUZE100_MAX_REGULATOR 15
-
-+#define PFUZE200_SW1AB 0
-+#define PFUZE200_SW2 1
-+#define PFUZE200_SW3A 2
-+#define PFUZE200_SW3B 3
-+#define PFUZE200_SWBST 4
-+#define PFUZE200_VSNVS 5
-+#define PFUZE200_VREFDDR 6
-+#define PFUZE200_VGEN1 7
-+#define PFUZE200_VGEN2 8
-+#define PFUZE200_VGEN3 9
-+#define PFUZE200_VGEN4 10
-+#define PFUZE200_VGEN5 11
-+#define PFUZE200_VGEN6 12
-+
- struct regulator_init_data;
-
- struct pfuze_regulator_platform_data {
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch b/recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch
deleted file mode 100644
index c7381e3..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0004-regulator-pfuze100-Add-terminate-entry-for-i2c-of-_d.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From fdbdb66994db6b896a5a6464b9c1efd7abfbfdb9 Mon Sep 17 00:00:00 2001
-From: Axel Lin <axel.lin at ingics.com>
-Date: Tue, 4 Mar 2014 18:20:14 +0800
-Subject: [PATCH 04/10] regulator: pfuze100: Add terminate entry for
- [i2c|of]_device_id tables
-Organization: O.S. Systems Software LTDA.
-
-Also remove PFUZE_NUM to avoid below build warnings:
-
- CC [M] drivers/regulator/pfuze100-regulator.o
-drivers/regulator/pfuze100-regulator.c:86:2: warning: excess elements in array initializer [enabled by default]
-drivers/regulator/pfuze100-regulator.c:86:2: warning: (near initialization for 'pfuze_device_id') [enabled by default]
-drivers/regulator/pfuze100-regulator.c:93:2: warning: excess elements in array initializer [enabled by default]
-drivers/regulator/pfuze100-regulator.c:93:2: warning: (near initialization for 'pfuze_dt_ids') [enabled by default]
-
-Signed-off-by: Axel Lin <axel.lin at ingics.com>
-Signed-off-by: Mark Brown <broonie at linaro.org>
-(cherry picked from commit e6c4c3378d82c5eeb136ed06b1a23651bcdaf739)
-(cherry picked from commit 12c7dd7c396378fd6dc907903a4ae540a75b31f5)
-
-Upstream-Status: Pending
----
- drivers/regulator/pfuze100-regulator.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
-index 35b1de1..0f4924e0 100644
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -56,7 +56,7 @@
- #define PFUZE100_VGEN5VOL 0x70
- #define PFUZE100_VGEN6VOL 0x71
-
--enum chips {PFUZE100, PFUZE200, PFUZE_NUM};
-+enum chips { PFUZE100, PFUZE200 };
-
- struct pfuze_regulator {
- struct regulator_desc desc;
-@@ -80,15 +80,17 @@ static const int pfuze100_vsnvs[] = {
- 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
- };
-
--static const struct i2c_device_id pfuze_device_id[PFUZE_NUM] = {
-+static const struct i2c_device_id pfuze_device_id[] = {
- {.name = "pfuze100", .driver_data = PFUZE100},
- {.name = "pfuze200", .driver_data = PFUZE200},
-+ { }
- };
- MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
-
--static const struct of_device_id pfuze_dt_ids[PFUZE_NUM] = {
-+static const struct of_device_id pfuze_dt_ids[] = {
- { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
- { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
-+ { }
- };
- MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
-
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch b/recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch
deleted file mode 100644
index 7fcc79d..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0005-regulator-pfuze100-Add-PFUZE200-support-to-Kconfig-a.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 2610dd3d4f0f167b77c4ce24e1756f7434a17cde Mon Sep 17 00:00:00 2001
-From: Axel Lin <axel.lin at ingics.com>
-Date: Wed, 5 Mar 2014 18:02:43 +0800
-Subject: [PATCH 05/10] regulator: pfuze100: Add PFUZE200 support to Kconfig
- and module description
-Organization: O.S. Systems Software LTDA.
-
-Signed-off-by: Axel Lin <axel.lin at ingics.com>
-Acked-by: Robin Gong <b38343 at freescale.com>
-Signed-off-by: Mark Brown <broonie at linaro.org>
-(cherry picked from commit 2cee2121db44cfeee206d0854bedd52344eea444)
-
-Signed-off-by: Robin Gong <b38343 at freescale.com>
-(cherry picked from commit 88236aaba4ed9b89a7873b30fc1ca9cdcb6b407d)
-
-Upstream-Status: Pending
----
- drivers/regulator/Kconfig | 6 +++---
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
-index 1339404..5b64f2c 100644
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -305,12 +305,12 @@ config REGULATOR_PCF50633
- on PCF50633
-
- config REGULATOR_PFUZE100
-- tristate "Support regulators on Freescale PFUZE100 PMIC"
-+ tristate "Freescale PFUZE100/PFUZE200 regulator driver"
- depends on I2C
- select REGMAP_I2C
- help
-- Say y here to support the regulators found on the Freescale PFUZE100
-- PMIC.
-+ Say y here to support the regulators found on the Freescale
-+ PFUZE100/PFUZE200 PMIC.
-
- config REGULATOR_RC5T583
- tristate "RICOH RC5T583 Power regulators"
-diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
-index 0f4924e0..21114f7 100644
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -535,6 +535,6 @@ static struct i2c_driver pfuze_driver = {
- module_i2c_driver(pfuze_driver);
-
- MODULE_AUTHOR("Robin Gong <b38343 at freescale.com>");
--MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
-+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC");
- MODULE_LICENSE("GPL v2");
- MODULE_ALIAS("i2c:pfuze100-regulator");
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch b/recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch
deleted file mode 100644
index 21b2e0c..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0006-regulator-pfuze100-Use-of_get_child_by_name.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From cef8d38fc22ed27e26c8b3d8594c152b6c542253 Mon Sep 17 00:00:00 2001
-From: Sachin Kamat <sachin.kamat at linaro.org>
-Date: Fri, 14 Feb 2014 17:20:00 +0530
-Subject: [PATCH 06/10] regulator: pfuze100: Use of_get_child_by_name
-Organization: O.S. Systems Software LTDA.
-
-of_find_node_by_name walks the allnodes list, and can thus walk
-outside of the parent node. Use of_get_child_by_name instead.
-
-Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
-Signed-off-by: Mark Brown <broonie at linaro.org>
-(cherry picked from commit 4d286178d55cc5811d50750a44eb729252adef11)
-
-Upstream-Status: Pending
----
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
-index 21114f7..15059c74 100644
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -299,7 +299,7 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
- if (!np)
- return 0;
-
-- parent = of_find_node_by_name(np, "regulators");
-+ parent = of_get_child_by_name(np, "regulators");
- if (!parent) {
- dev_err(dev, "regulators node not found\n");
- return -EINVAL;
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch b/recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch
deleted file mode 100644
index d077858..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0007-pfuze100-regulator-Fix-of_node_get-parameter.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From cc1f086131aa802abc38428a5a690eb5f35c8225 Mon Sep 17 00:00:00 2001
-From: Fabio Estevam <fabio.estevam at freescale.com>
-Date: Tue, 18 Feb 2014 23:46:14 -0300
-Subject: [PATCH 07/10] pfuze100-regulator: Fix of_node_get() parameter
-Organization: O.S. Systems Software LTDA.
-
-Since commit d7857c42 (regulator: pfuze100: Use of_get_child_by_name) we get
-the following probe failure:
-
-pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 0
-pfuze100-regulator 1-0008: FAB: 0, FIN: 0
-pfuze100-regulator 1-0008: regulators node not found
-pfuze100-regulator: probe of 1-0008 failed with error -22
-
-Now that of_get_child_by_name() is used we should adjust the device_node pointer
-'np' to not get the parent node anymore.
-
-Suggested-by: Shawn Guo <shawn.guo at linaro.org>
-Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
-Acked-by: Sachin Kamat <sachin.kamat at linaro.org>
-Signed-off-by: Mark Brown <broonie at linaro.org>
-(cherry picked from commit 0780208ff201feb45e12ebecb39ecac4740b1244)
-
-Upstream-Status: Pending
----
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
-index 15059c74..b9c1b9a 100644
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -295,7 +295,7 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
- struct device_node *np, *parent;
- int ret;
-
-- np = of_node_get(dev->parent->of_node);
-+ np = of_node_get(dev->of_node);
- if (!np)
- return 0;
-
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch b/recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch
deleted file mode 100644
index f1e88d4..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0008-ENGR00301078-1-ARM-dts-imx6dl-sabresd-add-support-fo.patch
+++ /dev/null
@@ -1,752 +0,0 @@
-From 37e501e8c4e1f1511e017aa0a7def38895a47fa6 Mon Sep 17 00:00:00 2001
-From: Robin Gong <b38343 at freescale.com>
-Date: Thu, 6 Mar 2014 18:59:30 +0800
-Subject: [PATCH 08/10] ENGR00301078-1: ARM: dts: imx6dl-sabresd: add support
- for pfuze200 on mx6dl-sabresd
-Organization: O.S. Systems Software LTDA.
-
-move pmic device node from imx6qdl-sabresd.dtsi to up-level, and add
-another layer on imx6dl-sabresd to diff pfuze100 or pfuze200. Meanwhile
-only work in ldo-enable mode if using pfuze200,since 'SW1C' switch
-regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
-to share the same switch regulator
-
-Signed-off-by: Robin Gong <b38343 at freescale.com>
-(cherry picked from commit 32e4e161b087bfdcea74bd80f0b24c341092c96b)
-
-Upstream-Status: Pending
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/imx6dl-sabresd-common.dtsi | 130 ++++++++++++++++++++
- arch/arm/boot/dts/imx6dl-sabresd-pf200.dts | 126 +++++++++++++++++++
- arch/arm/boot/dts/imx6dl-sabresd.dts | 175 ++++++++++++---------------
- arch/arm/boot/dts/imx6q-sabresd.dts | 101 ++++++++++++++++
- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 99 ---------------
- 6 files changed, 435 insertions(+), 197 deletions(-)
- create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-common.dtsi
- create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pf200.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index f43b68b..c744cda 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6dl-sabresd.dtb \
- imx6dl-sabresd-hdcp.dtb \
- imx6dl-sabresd-ldo.dtb \
-+ imx6dl-sabresd-pf200.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
- imx6q-sabreauto.dtb \
-diff --git a/arch/arm/boot/dts/imx6dl-sabresd-common.dtsi b/arch/arm/boot/dts/imx6dl-sabresd-common.dtsi
-new file mode 100644
-index 0000000..2a07534
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-sabresd-common.dtsi
-@@ -0,0 +1,130 @@
-+/*
-+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+&battery {
-+ offset-charger = <1485>;
-+ offset-discharger = <1464>;
-+ offset-usb-charger = <1285>;
-+};
-+
-+&i2c3 {
-+ max17135 at 48 {
-+ compatible = "maxim,max17135";
-+ reg = <0x48>;
-+ vneg_pwrup = <1>;
-+ gvee_pwrup = <1>;
-+ vpos_pwrup = <2>;
-+ gvdd_pwrup = <1>;
-+ gvdd_pwrdn = <1>;
-+ vpos_pwrdn = <2>;
-+ gvee_pwrdn = <1>;
-+ vneg_pwrdn = <1>;
-+ SENSOR-supply = <®_sensor>;
-+ gpio_pmic_pwrgood = <&gpio2 21 0>;
-+ gpio_pmic_vcom_ctrl = <&gpio3 17 0>;
-+ gpio_pmic_wakeup = <&gpio3 20 0>;
-+ gpio_pmic_v3p3 = <&gpio2 20 0>;
-+ gpio_pmic_intr = <&gpio2 25 0>;
-+
-+ regulators {
-+ DISPLAY_reg: DISPLAY {
-+ regulator-name = "DISPLAY";
-+ };
-+
-+ GVDD_reg: GVDD {
-+ /* 20v */
-+ regulator-name = "GVDD";
-+ };
-+
-+ GVEE_reg: GVEE {
-+ /* -22v */
-+ regulator-name = "GVEE";
-+ };
-+
-+ HVINN_reg: HVINN {
-+ /* -22v */
-+ regulator-name = "HVINN";
-+ };
-+
-+ HVINP_reg: HVINP {
-+ /* 20v */
-+ regulator-name = "HVINP";
-+ };
-+
-+ VCOM_reg: VCOM {
-+ regulator-name = "VCOM";
-+ /* 2's-compliment, -4325000 */
-+ regulator-min-microvolt = <0xffbe0178>;
-+ /* 2's-compliment, -500000 */
-+ regulator-max-microvolt = <0xfff85ee0>;
-+ };
-+
-+ VNEG_reg: VNEG {
-+ /* -15v */
-+ regulator-name = "VNEG";
-+ };
-+
-+ VPOS_reg: VPOS {
-+ /* 15v */
-+ regulator-name = "VPOS";
-+ };
-+
-+ V3P3_reg: V3P3 {
-+ regulator-name = "V3P3";
-+ };
-+ };
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog_1>, <&pinctrl_hog_2>;
-+
-+ hog {
-+ pinctrl_hog_2: hoggrp-2 {
-+ fsl,pins = <
-+ /* MAX17135 */
-+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-+ MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x80000000
-+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
-+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000
-+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000
-+ /* elan touch */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000
-+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000
-+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x170b0
-+ >;
-+ };
-+ };
-+};
-+
-+&epdc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_epdc_0>;
-+ V3P3-supply = <&V3P3_reg>;
-+ VCOM-supply = <&VCOM_reg>;
-+ DISPLAY-supply = <&DISPLAY_reg>;
-+ status = "okay";
-+};
-+
-+&ldb {
-+ ipu_id = <0>;
-+ sec_ipu_id = <0>;
-+};
-+
-+&mxcfb1 {
-+ status = "okay";
-+};
-+
-+&mxcfb2 {
-+ status = "okay";
-+};
-+
-+&pxp {
-+ status = "okay";
-+};
-diff --git a/arch/arm/boot/dts/imx6dl-sabresd-pf200.dts b/arch/arm/boot/dts/imx6dl-sabresd-pf200.dts
-new file mode 100644
-index 0000000..499f7d3
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-sabresd-pf200.dts
-@@ -0,0 +1,126 @@
-+/*
-+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-sabresd.dtsi"
-+#include "imx6dl-sabresd-common.dtsi"
-+
-+/ {
-+ model = "Freescale i.MX6 DualLite SABRE Smart Device Board(PFUZE200)";
-+ compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
-+};
-+
-+&cpu0 {
-+ arm-supply = <®_arm>;
-+ soc-supply = <®_soc>;
-+ pu-supply = <®_pu>; /* use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&gpc {
-+ fsl,ldo-bypass = <0>; /* use ldo-bypass, u-boot will check it and configure */
-+ fsl,wdog-reset = <1>; /* watchdog select of reset source */
-+ pu-supply = <®_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&gpu {
-+ pu-supply = <®_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&vpu {
-+ pu-supply = <®_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&i2c2 {
-+ pmic: pfuze200 at 08 {
-+ compatible = "fsl,pfuze200";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
-index 5713c71..b4c738d 100644
---- a/arch/arm/boot/dts/imx6dl-sabresd.dts
-+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2013 Freescale Semiconductor, Inc.
-+ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -10,131 +10,110 @@
-
- #include "imx6dl.dtsi"
- #include "imx6qdl-sabresd.dtsi"
-+#include "imx6dl-sabresd-common.dtsi"
-
- / {
-- model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
-+ model = "Freescale i.MX6 DualLite SABRE Smart Device Board(PFUZE100)";
- compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
- };
-
--&battery {
-- offset-charger = <1485>;
-- offset-discharger = <1464>;
-- offset-usb-charger = <1285>;
--};
--
--&i2c3 {
-- max17135 at 48 {
-- compatible = "maxim,max17135";
-- reg = <0x48>;
-- vneg_pwrup = <1>;
-- gvee_pwrup = <1>;
-- vpos_pwrup = <2>;
-- gvdd_pwrup = <1>;
-- gvdd_pwrdn = <1>;
-- vpos_pwrdn = <2>;
-- gvee_pwrdn = <1>;
-- vneg_pwrdn = <1>;
-- SENSOR-supply = <®_sensor>;
-- gpio_pmic_pwrgood = <&gpio2 21 0>;
-- gpio_pmic_vcom_ctrl = <&gpio3 17 0>;
-- gpio_pmic_wakeup = <&gpio3 20 0>;
-- gpio_pmic_v3p3 = <&gpio2 20 0>;
-- gpio_pmic_intr = <&gpio2 25 0>;
-+&i2c2 {
-+ pmic: pfuze100 at 08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-
- regulators {
-- DISPLAY_reg: DISPLAY {
-- regulator-name = "DISPLAY";
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
- };
-
-- GVDD_reg: GVDD {
-- /* 20v */
-- regulator-name = "GVDD";
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
- };
-
-- GVEE_reg: GVEE {
-- /* -22v */
-- regulator-name = "GVEE";
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
- };
-
-- HVINN_reg: HVINN {
-- /* -22v */
-- regulator-name = "HVINN";
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
- };
-
-- HVINP_reg: HVINP {
-- /* 20v */
-- regulator-name = "HVINP";
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
- };
-
-- VCOM_reg: VCOM {
-- regulator-name = "VCOM";
-- /* 2's-compliment, -4325000 */
-- regulator-min-microvolt = <0xffbe0178>;
-- /* 2's-compliment, -500000 */
-- regulator-max-microvolt = <0xfff85ee0>;
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
- };
-
-- VNEG_reg: VNEG {
-- /* -15v */
-- regulator-name = "VNEG";
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
- };
-
-- VPOS_reg: VPOS {
-- /* 15v */
-- regulator-name = "VPOS";
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
- };
-
-- V3P3_reg: V3P3 {
-- regulator-name = "V3P3";
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
- };
-- };
-- };
--};
-
--&iomuxc {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_hog_1>, <&pinctrl_hog_2>;
--
-- hog {
-- pinctrl_hog_2: hoggrp-2 {
-- fsl,pins = <
-- /* MAX17135 */
-- MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-- MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x80000000
-- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
-- MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000
-- MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000
-- /* elan touch */
-- MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000
-- MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000
-- MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x170b0
-- >;
-- };
-- };
--};
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-
--&epdc {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_epdc_0>;
-- V3P3-supply = <&V3P3_reg>;
-- VCOM-supply = <&VCOM_reg>;
-- DISPLAY-supply = <&DISPLAY_reg>;
-- status = "okay";
--};
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-
--&ldb {
-- ipu_id = <0>;
-- sec_ipu_id = <0>;
--};
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-
--&mxcfb1 {
-- status = "okay";
--};
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-
--&mxcfb2 {
-- status = "okay";
--};
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-
--&pxp {
-- status = "okay";
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
- };
-diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
-index 072e7d3..5e5ff56 100644
---- a/arch/arm/boot/dts/imx6q-sabresd.dts
-+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
-@@ -26,6 +26,107 @@
- offset-usb-charger = <1685>;
- };
-
-+&i2c2 {
-+ pmic: pfuze100 at 08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+};
-+
- &mxcfb1 {
- status = "okay";
- };
-diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
-index 66b6145..5d774e5 100644
---- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
-@@ -405,105 +405,6 @@
- mclk_source = <0>;
- };
-
-- pmic: pfuze100 at 08 {
-- compatible = "fsl,pfuze100";
-- reg = <0x08>;
--
-- regulators {
-- sw1a_reg: sw1ab {
-- regulator-min-microvolt = <300000>;
-- regulator-max-microvolt = <1875000>;
-- regulator-boot-on;
-- regulator-always-on;
-- regulator-ramp-delay = <6250>;
-- };
--
-- sw1c_reg: sw1c {
-- regulator-min-microvolt = <300000>;
-- regulator-max-microvolt = <1875000>;
-- regulator-boot-on;
-- regulator-always-on;
-- regulator-ramp-delay = <6250>;
-- };
--
-- sw2_reg: sw2 {
-- regulator-min-microvolt = <800000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-boot-on;
-- regulator-always-on;
-- };
--
-- sw3a_reg: sw3a {
-- regulator-min-microvolt = <400000>;
-- regulator-max-microvolt = <1975000>;
-- regulator-boot-on;
-- regulator-always-on;
-- };
--
-- sw3b_reg: sw3b {
-- regulator-min-microvolt = <400000>;
-- regulator-max-microvolt = <1975000>;
-- regulator-boot-on;
-- regulator-always-on;
-- };
--
-- sw4_reg: sw4 {
-- regulator-min-microvolt = <800000>;
-- regulator-max-microvolt = <3300000>;
-- };
--
-- swbst_reg: swbst {
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5150000>;
-- };
--
-- snvs_reg: vsnvs {
-- regulator-min-microvolt = <1000000>;
-- regulator-max-microvolt = <3000000>;
-- regulator-boot-on;
-- regulator-always-on;
-- };
--
-- vref_reg: vrefddr {
-- regulator-boot-on;
-- regulator-always-on;
-- };
--
-- vgen1_reg: vgen1 {
-- regulator-min-microvolt = <800000>;
-- regulator-max-microvolt = <1550000>;
-- };
--
-- vgen2_reg: vgen2 {
-- regulator-min-microvolt = <800000>;
-- regulator-max-microvolt = <1550000>;
-- };
--
-- vgen3_reg: vgen3 {
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-- };
--
-- vgen4_reg: vgen4 {
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-always-on;
-- };
--
-- vgen5_reg: vgen5 {
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-always-on;
-- };
--
-- vgen6_reg: vgen6 {
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-always-on;
-- };
-- };
-- };
--
- egalax_ts at 04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch b/recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch
deleted file mode 100644
index 326e0a7..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0009-ENGR00301078-2-ARM-dts-imx6sl-evk-add-support-for-pf.patch
+++ /dev/null
@@ -1,1202 +0,0 @@
-From 3082ee40d024412e8c275f1945e4a06a638e81bb Mon Sep 17 00:00:00 2001
-From: Robin Gong <b38343 at freescale.com>
-Date: Thu, 6 Mar 2014 19:36:02 +0800
-Subject: [PATCH 09/10] ENGR00301078-2: ARM: dts: imx6sl-evk: add support for
- pfuze200 on imx6sl-evk
-Organization: O.S. Systems Software LTDA.
-
-move pmic device node from imx6sl-evk.dtsi to upper-level, and add
-another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile
-only works in ldo-enable mode if using pfuze200, since 'SW1C' switch
-regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
-to share the same switch regulator
-
-Signed-off-by: Robin Gong <b38343 at freescale.com>
-
-Upstream-Status: Pending
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/imx6sl-evk-common.dtsi | 504 +++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6sl-evk-pf200.dts | 122 ++++++++
- arch/arm/boot/dts/imx6sl-evk.dts | 497 +-----------------------------
- 4 files changed, 630 insertions(+), 494 deletions(-)
- create mode 100644 arch/arm/boot/dts/imx6sl-evk-common.dtsi
- create mode 100644 arch/arm/boot/dts/imx6sl-evk-pf200.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index c744cda..c5f9a19 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6sl-evk.dtb \
- imx6sl-evk-csi.dtb \
- imx6sl-evk-ldo.dtb \
-+ imx6sl-evk-pf200.dtb \
- vf610-twr.dtb
- dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
- imx23-olinuxino.dtb \
-diff --git a/arch/arm/boot/dts/imx6sl-evk-common.dtsi b/arch/arm/boot/dts/imx6sl-evk-common.dtsi
-new file mode 100644
-index 0000000..a1a3969
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sl-evk-common.dtsi
-@@ -0,0 +1,504 @@
-+/*
-+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/ {
-+ memory {
-+ reg = <0x80000000 0x40000000>;
-+ };
-+
-+ battery: max8903 at 0 {
-+ compatible = "fsl,max8903-charger";
-+ pinctrl-names = "default";
-+ dok_input = <&gpio4 13 1>;
-+ uok_input = <&gpio4 13 1>;
-+ chg_input = <&gpio4 15 1>;
-+ flt_input = <&gpio4 14 1>;
-+ fsl,dcm_always_high;
-+ fsl,dc_valid;
-+ fsl,adc_disable;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_lcd_3v3: lcd-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "lcd-3v3";
-+ gpio = <&gpio4 3 0>;
-+ enable-active-high;
-+ };
-+
-+ reg_aud3v: wm8962_supply_3v15 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "wm8962-supply-3v15";
-+ regulator-min-microvolt = <3150000>;
-+ regulator-max-microvolt = <3150000>;
-+ regulator-boot-on;
-+ };
-+
-+ reg_aud4v: wm8962_supply_4v2 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "wm8962-supply-4v2";
-+ regulator-min-microvolt = <4325000>;
-+ regulator-max-microvolt = <4325000>;
-+ regulator-boot-on;
-+ };
-+
-+ reg_usb_otg1_vbus: usb_otg1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio4 0 0>;
-+ enable-active-high;
-+ };
-+
-+ reg_usb_otg2_vbus: usb_otg2_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg2_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio4 2 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm1 0 5000000>;
-+ brightness-levels = <0 4 8 16 32 64 128 255>;
-+ default-brightness-level = <6>;
-+ };
-+
-+ csi_v4l2_cap {
-+ compatible = "fsl,imx6sl-csi-v4l2";
-+ status = "disabled";
-+ };
-+
-+ pxp_v4l2_out {
-+ compatible = "fsl,imx6sl-pxp-v4l2";
-+ status = "okay";
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabresd-wm8962",
-+ "fsl,imx-audio-wm8962";
-+ model = "wm8962-audio";
-+ ssi-controller = <&ssi2>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "Headphone Jack", "HPOUTL",
-+ "Headphone Jack", "HPOUTR",
-+ "Ext Spk", "SPKOUTL",
-+ "Ext Spk", "SPKOUTR",
-+ "AMIC", "MICBIAS",
-+ "IN3R", "AMIC";
-+ amic-mono;
-+ mux-int-port = <2>;
-+ mux-ext-port = <3>;
-+ hp-det-gpios = <&gpio4 19 1>;
-+ };
-+
-+ sound-spdif {
-+ compatible = "fsl,imx-audio-spdif",
-+ "fsl,imx6sl-evk-spdif";
-+ model = "imx-spdif";
-+ spdif-controller = <&spdif>;
-+ spdif-out;
-+ };
-+
-+ sii902x_reset: sii902x-reset {
-+ compatible = "gpio-reset";
-+ reset-gpios = <&gpio2 19 1>;
-+ reset-delay-us = <100000>;
-+ #reset-cells = <0>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&csi {
-+ status = "disabled";
-+};
-+
-+&ecspi1 {
-+ fsl,spi-num-chipselects = <1>;
-+ cs-gpios = <&gpio4 11 0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi1_1>;
-+ status = "okay";
-+
-+ flash: m25p80 at 0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "st,m25p32";
-+ spi-max-frequency = <20000000>;
-+ reg = <0>;
-+ };
-+};
-+
-+&epdc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_epdc_0>;
-+ V3P3-supply = <&V3P3_reg>;
-+ VCOM-supply = <&VCOM_reg>;
-+ DISPLAY-supply = <&DISPLAY_reg>;
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ arm-supply = <&sw1a_reg>;
-+ soc-supply = <&sw1c_reg>;
-+ pu-supply = <&pu_dummy>; /* use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&fec {
-+ pinctrl-names = "default", "sleep";
-+ pinctrl-0 = <&pinctrl_fec_1>;
-+ pinctrl-1 = <&pinctrl_fec_1_sleep>;
-+ phy-mode = "rmii";
-+ phy-reset-gpios = <&gpio4 21 0>; /* GPIO4_21 */
-+ phy-reset-duration = <1>;
-+ status = "okay";
-+};
-+
-+&gpc {
-+ fsl,cpu_pupscr_sw2iso = <0xf>;
-+ fsl,cpu_pupscr_sw = <0xf>;
-+ fsl,cpu_pdnscr_iso2sw = <0x1>;
-+ fsl,cpu_pdnscr_iso = <0x1>;
-+ fsl,ldo-bypass = <1>; /* use ldo-bypass, u-boot will check it and configure */
-+ fsl,wdog-reset = <1>; /* watchdog select of reset source */
-+ pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&gpu {
-+ pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ elan at 10 {
-+ compatible = "elan,elan-touch";
-+ reg = <0x10>;
-+ interrupt-parent = <&gpio2>;
-+ interrupts = <10 2>;
-+ gpio_elan_cs = <&gpio2 9 0>;
-+ gpio_elan_rst = <&gpio4 4 0>;
-+ gpio_intr = <&gpio2 10 0>;
-+ status = "okay";
-+ };
-+
-+ max17135 at 48 {
-+ compatible = "maxim,max17135";
-+ reg = <0x48>;
-+ vneg_pwrup = <1>;
-+ gvee_pwrup = <2>;
-+ vpos_pwrup = <10>;
-+ gvdd_pwrup = <12>;
-+ gvdd_pwrdn = <1>;
-+ vpos_pwrdn = <2>;
-+ gvee_pwrdn = <8>;
-+ vneg_pwrdn = <10>;
-+ gpio_pmic_pwrgood = <&gpio2 13 0>;
-+ gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
-+ gpio_pmic_wakeup = <&gpio2 14 0>;
-+ gpio_pmic_v3p3 = <&gpio2 7 0>;
-+ gpio_pmic_intr = <&gpio2 12 0>;
-+
-+ regulators {
-+ DISPLAY_reg: DISPLAY {
-+ regulator-name = "DISPLAY";
-+ };
-+
-+ GVDD_reg: GVDD {
-+ /* 20v */
-+ regulator-name = "GVDD";
-+ };
-+
-+ GVEE_reg: GVEE {
-+ /* -22v */
-+ regulator-name = "GVEE";
-+ };
-+
-+ HVINN_reg: HVINN {
-+ /* -22v */
-+ regulator-name = "HVINN";
-+ };
-+
-+ HVINP_reg: HVINP {
-+ /* 20v */
-+ regulator-name = "HVINP";
-+ };
-+
-+ VCOM_reg: VCOM {
-+ regulator-name = "VCOM";
-+ /* 2's-compliment, -4325000 */
-+ regulator-min-microvolt = <0xffbe0178>;
-+ /* 2's-compliment, -500000 */
-+ regulator-max-microvolt = <0xfff85ee0>;
-+ };
-+
-+ VNEG_reg: VNEG {
-+ /* -15v */
-+ regulator-name = "VNEG";
-+ };
-+
-+ VPOS_reg: VPOS {
-+ /* 15v */
-+ regulator-name = "VPOS";
-+ };
-+
-+ V3P3_reg: V3P3 {
-+ regulator-name = "V3P3";
-+ };
-+ };
-+ };
-+
-+ mma8450 at 1c {
-+ compatible = "fsl,mma8450";
-+ reg = <0x1c>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_1>;
-+ status = "okay";
-+
-+ codec: wm8962 at 1a {
-+ compatible = "wlf,wm8962";
-+ reg = <0x1a>;
-+ clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
-+ DCVDD-supply = <&vgen3_reg>;
-+ DBVDD-supply = <®_aud3v>;
-+ AVDD-supply = <&vgen3_reg>;
-+ CPVDD-supply = <&vgen3_reg>;
-+ MICVDD-supply = <®_aud3v>;
-+ PLLVDD-supply = <&vgen3_reg>;
-+ SPKVDD1-supply = <®_aud4v>;
-+ SPKVDD2-supply = <®_aud4v>;
-+ amic-mono;
-+ };
-+
-+ sii902x at 39 {
-+ compatible = "SiI,sii902x";
-+ interrupt-parent = <&gpio2>;
-+ interrupts = <10 2>;
-+ mode_str ="1280x720M at 60";
-+ bits-per-pixel = <32>;
-+ resets = <&sii902x_reset>;
-+ reg = <0x39>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_1>;
-+ status = "disabled";
-+
-+ ov564x: ov564x at 3c {
-+ compatible = "ovti,ov564x";
-+ reg = <0x3c>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_csi_0>;
-+ clocks = <&clks IMX6SL_CLK_CSI>;
-+ clock-names = "csi_mclk";
-+ AVDD-supply = <&vgen6_reg>; /* 2.8v */
-+ DVDD-supply = <&vgen2_reg>; /* 1.5v*/
-+ pwn-gpios = <&gpio1 25 1>;
-+ rst-gpios = <&gpio1 26 0>;
-+ csi_id = <0>;
-+ mclk = <24000000>;
-+ mclk_source = <0>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default", "sleep";
-+ pinctrl-0 = <&pinctrl_hog>;
-+ pinctrl-1 = <&pinctrl_hog_sleep>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
-+ MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
-+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
-+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
-+ MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
-+ MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x80000000
-+ MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x110b0
-+ MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000
-+ MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x80000000
-+ MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x80000000
-+ MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x80000000
-+ MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x80000000
-+ MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x170b0
-+ MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x80000000
-+ MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x110b0
-+ MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
-+ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
-+ MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
-+ MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0
-+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x1b0b0
-+ MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
-+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
-+ >;
-+ };
-+
-+ pinctrl_hog_sleep: hoggrp_sleep {
-+ fsl,pins = <
-+ MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x3080
-+ MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x3080
-+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x3080
-+ >;
-+ };
-+ };
-+};
-+
-+&kpp {
-+ pinctrl-names = "default", "sleep";
-+ pinctrl-0 = <&pinctrl_kpp_1>;
-+ pinctrl-1 = <&pinctrl_kpp_1_sleep>;
-+ linux,keymap = <
-+ 0x00000067 /* KEY_UP */
-+ 0x0001006c /* KEY_DOWN */
-+ 0x0002001c /* KEY_ENTER */
-+ 0x01000066 /* KEY_HOME */
-+ 0x0101006a /* KEY_RIGHT */
-+ 0x01020069 /* KEY_LEFT */
-+ 0x02000072 /* KEY_VOLUMEDOWN */
-+ 0x02010073 /* KEY_VOLUMEUP */
-+ >;
-+ status = "okay";
-+};
-+
-+&lcdif {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_lcdif_dat_0
-+ &pinctrl_lcdif_ctrl_0>;
-+ lcd-supply = <®_lcd_3v3>;
-+ display = <&display>;
-+ status = "okay";
-+
-+ display: display {
-+ bits-per-pixel = <16>;
-+ bus-width = <24>;
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: timing0 {
-+ clock-frequency = <33500000>;
-+ hactive = <800>;
-+ vactive = <480>;
-+ hback-porch = <89>;
-+ hfront-porch = <164>;
-+ vback-porch = <23>;
-+ vfront-porch = <10>;
-+ hsync-len = <10>;
-+ vsync-len = <10>;
-+ hsync-active = <0>;
-+ vsync-active = <0>;
-+ de-active = <1>;
-+ pixelclk-active = <0>;
-+ };
-+ };
-+ };
-+};
-+
-+&pwm1 {
-+ pinctrl-names = "default", "sleep";
-+ pinctrl-0 = <&pinctrl_pwm1_0>;
-+ pinctrl-1 = <&pinctrl_pwm1_0_sleep>;
-+ status = "okay";
-+};
-+
-+&pxp {
-+ status = "okay";
-+};
-+
-+&spdif {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_spdif_1>;
-+ status = "okay";
-+};
-+
-+&ssi2 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_1>;
-+ status = "okay";
-+};
-+
-+&usbotg1 {
-+ vbus-supply = <®_usb_otg1_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg1_1>;
-+ disable-over-current;
-+ imx6-usb-charger-detection;
-+ status = "okay";
-+};
-+
-+&usbotg2 {
-+ vbus-supply = <®_usb_otg2_vbus>;
-+ dr_mode = "host";
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usdhc1 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc1_1>;
-+ pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
-+ bus-width = <8>;
-+ cd-gpios = <&gpio4 7 0>;
-+ wp-gpios = <&gpio4 6 0>;
-+ keep-power-in-suspend;
-+ enable-sdio-wakeup;
-+ status = "okay";
-+};
-+
-+&usdhc2 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc2_1>;
-+ pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
-+ cd-gpios = <&gpio5 0 0>;
-+ wp-gpios = <&gpio4 29 0>;
-+ keep-power-in-suspend;
-+ enable-sdio-wakeup;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc3_1>;
-+ pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
-+ cd-gpios = <&gpio3 22 0>;
-+ keep-power-in-suspend;
-+ enable-sdio-wakeup;
-+ status = "okay";
-+};
-diff --git a/arch/arm/boot/dts/imx6sl-evk-pf200.dts b/arch/arm/boot/dts/imx6sl-evk-pf200.dts
-new file mode 100644
-index 0000000..55d3081
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6sl-evk-pf200.dts
-@@ -0,0 +1,122 @@
-+/*
-+ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6sl.dtsi"
-+#include "imx6sl-evk-common.dtsi"
-+
-+/ {
-+ model = "Freescale i.MX6 SoloLite EVK Board(PFUZE200)";
-+ compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-+};
-+
-+&cpu0 {
-+ arm-supply = <®_arm>;
-+ soc-supply = <®_soc>;
-+ pu-supply = <®_pu>; /* use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&gpc {
-+ fsl,ldo-bypass = <0>; /* use ldo-bypass, u-boot will check it and configure */
-+ fsl,wdog-reset = <1>; /* watchdog select of reset source */
-+ pu-supply = <®_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&gpu {
-+ pu-supply = <®_pu>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
-+};
-+
-+&i2c1 {
-+ pmic: pfuze200 at 08 {
-+ compatible = "fsl,pfuze200";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
-index 4966f38..ed0ce89 100644
---- a/arch/arm/boot/dts/imx6sl-evk.dts
-+++ b/arch/arm/boot/dts/imx6sl-evk.dts
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2013 Freescale Semiconductor, Inc.
-+ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -9,195 +9,14 @@
- /dts-v1/;
-
- #include "imx6sl.dtsi"
-+#include "imx6sl-evk-common.dtsi"
-
- / {
-- model = "Freescale i.MX6 SoloLite EVK Board";
-+ model = "Freescale i.MX6 SoloLite EVK Board(PFUZE100)";
- compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
--
-- memory {
-- reg = <0x80000000 0x40000000>;
-- };
--
-- battery: max8903 at 0 {
-- compatible = "fsl,max8903-charger";
-- pinctrl-names = "default";
-- dok_input = <&gpio4 13 1>;
-- uok_input = <&gpio4 13 1>;
-- chg_input = <&gpio4 15 1>;
-- flt_input = <&gpio4 14 1>;
-- fsl,dcm_always_high;
-- fsl,dc_valid;
-- fsl,adc_disable;
-- status = "okay";
-- };
-- regulators {
-- compatible = "simple-bus";
--
-- reg_lcd_3v3: lcd-3v3 {
-- compatible = "regulator-fixed";
-- regulator-name = "lcd-3v3";
-- gpio = <&gpio4 3 0>;
-- enable-active-high;
-- };
--
-- reg_aud3v: wm8962_supply_3v15 {
-- compatible = "regulator-fixed";
-- regulator-name = "wm8962-supply-3v15";
-- regulator-min-microvolt = <3150000>;
-- regulator-max-microvolt = <3150000>;
-- regulator-boot-on;
-- };
--
-- reg_aud4v: wm8962_supply_4v2 {
-- compatible = "regulator-fixed";
-- regulator-name = "wm8962-supply-4v2";
-- regulator-min-microvolt = <4325000>;
-- regulator-max-microvolt = <4325000>;
-- regulator-boot-on;
-- };
--
-- reg_usb_otg1_vbus: usb_otg1_vbus {
-- compatible = "regulator-fixed";
-- regulator-name = "usb_otg1_vbus";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- gpio = <&gpio4 0 0>;
-- enable-active-high;
-- };
--
-- reg_usb_otg2_vbus: usb_otg2_vbus {
-- compatible = "regulator-fixed";
-- regulator-name = "usb_otg2_vbus";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- gpio = <&gpio4 2 0>;
-- enable-active-high;
-- };
-- };
--
-- backlight {
-- compatible = "pwm-backlight";
-- pwms = <&pwm1 0 5000000>;
-- brightness-levels = <0 4 8 16 32 64 128 255>;
-- default-brightness-level = <6>;
-- };
--
-- csi_v4l2_cap {
-- compatible = "fsl,imx6sl-csi-v4l2";
-- status = "disabled";
-- };
--
-- pxp_v4l2_out {
-- compatible = "fsl,imx6sl-pxp-v4l2";
-- status = "okay";
-- };
--
-- sound {
-- compatible = "fsl,imx6q-sabresd-wm8962",
-- "fsl,imx-audio-wm8962";
-- model = "wm8962-audio";
-- ssi-controller = <&ssi2>;
-- audio-codec = <&codec>;
-- audio-routing =
-- "Headphone Jack", "HPOUTL",
-- "Headphone Jack", "HPOUTR",
-- "Ext Spk", "SPKOUTL",
-- "Ext Spk", "SPKOUTR",
-- "AMIC", "MICBIAS",
-- "IN3R", "AMIC";
-- amic-mono;
-- mux-int-port = <2>;
-- mux-ext-port = <3>;
-- hp-det-gpios = <&gpio4 19 1>;
-- };
--
-- sound-spdif {
-- compatible = "fsl,imx-audio-spdif",
-- "fsl,imx6sl-evk-spdif";
-- model = "imx-spdif";
-- spdif-controller = <&spdif>;
-- spdif-out;
-- };
--
-- sii902x_reset: sii902x-reset {
-- compatible = "gpio-reset";
-- reset-gpios = <&gpio2 19 1>;
-- reset-delay-us = <100000>;
-- #reset-cells = <0>;
-- };
--};
--
--&audmux {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_audmux_1>;
-- status = "okay";
--};
--
--&csi {
-- status = "disabled";
--};
--
--&ecspi1 {
-- fsl,spi-num-chipselects = <1>;
-- cs-gpios = <&gpio4 11 0>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_ecspi1_1>;
-- status = "okay";
--
-- flash: m25p80 at 0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- compatible = "st,m25p32";
-- spi-max-frequency = <20000000>;
-- reg = <0>;
-- };
--};
--
--&epdc {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_epdc_0>;
-- V3P3-supply = <&V3P3_reg>;
-- VCOM-supply = <&VCOM_reg>;
-- DISPLAY-supply = <&DISPLAY_reg>;
-- status = "okay";
--};
--
--&cpu0 {
-- arm-supply = <&sw1a_reg>;
-- soc-supply = <&sw1c_reg>;
-- pu-supply = <&pu_dummy>; /* use pu_dummy if VDDSOC share with VDDPU */
--};
--
--&fec {
-- pinctrl-names = "default", "sleep";
-- pinctrl-0 = <&pinctrl_fec_1>;
-- pinctrl-1 = <&pinctrl_fec_1_sleep>;
-- phy-mode = "rmii";
-- phy-reset-gpios = <&gpio4 21 0>; /* GPIO4_21 */
-- phy-reset-duration = <1>;
-- status = "okay";
--};
--
--&gpc {
-- fsl,cpu_pupscr_sw2iso = <0xf>;
-- fsl,cpu_pupscr_sw = <0xf>;
-- fsl,cpu_pdnscr_iso2sw = <0x1>;
-- fsl,cpu_pdnscr_iso = <0x1>;
-- fsl,ldo-bypass = <1>; /* use ldo-bypass, u-boot will check it and configure */
-- fsl,wdog-reset = <1>; /* watchdog select of reset source */
-- pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
--};
--
--&gpu {
-- pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */
- };
-
- &i2c1 {
-- clock-frequency = <100000>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_i2c1_1>;
-- status = "okay";
--
- pmic: pfuze100 at 08 {
- compatible = "fsl,pfuze100";
- reg = <0x08>;
-@@ -297,314 +116,4 @@
- };
- };
- };
--
-- elan at 10 {
-- compatible = "elan,elan-touch";
-- reg = <0x10>;
-- interrupt-parent = <&gpio2>;
-- interrupts = <10 2>;
-- gpio_elan_cs = <&gpio2 9 0>;
-- gpio_elan_rst = <&gpio4 4 0>;
-- gpio_intr = <&gpio2 10 0>;
-- status = "okay";
-- };
--
-- max17135 at 48 {
-- compatible = "maxim,max17135";
-- reg = <0x48>;
-- vneg_pwrup = <1>;
-- gvee_pwrup = <2>;
-- vpos_pwrup = <10>;
-- gvdd_pwrup = <12>;
-- gvdd_pwrdn = <1>;
-- vpos_pwrdn = <2>;
-- gvee_pwrdn = <8>;
-- vneg_pwrdn = <10>;
-- gpio_pmic_pwrgood = <&gpio2 13 0>;
-- gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
-- gpio_pmic_wakeup = <&gpio2 14 0>;
-- gpio_pmic_v3p3 = <&gpio2 7 0>;
-- gpio_pmic_intr = <&gpio2 12 0>;
--
-- regulators {
-- DISPLAY_reg: DISPLAY {
-- regulator-name = "DISPLAY";
-- };
--
-- GVDD_reg: GVDD {
-- /* 20v */
-- regulator-name = "GVDD";
-- };
--
-- GVEE_reg: GVEE {
-- /* -22v */
-- regulator-name = "GVEE";
-- };
--
-- HVINN_reg: HVINN {
-- /* -22v */
-- regulator-name = "HVINN";
-- };
--
-- HVINP_reg: HVINP {
-- /* 20v */
-- regulator-name = "HVINP";
-- };
--
-- VCOM_reg: VCOM {
-- regulator-name = "VCOM";
-- /* 2's-compliment, -4325000 */
-- regulator-min-microvolt = <0xffbe0178>;
-- /* 2's-compliment, -500000 */
-- regulator-max-microvolt = <0xfff85ee0>;
-- };
--
-- VNEG_reg: VNEG {
-- /* -15v */
-- regulator-name = "VNEG";
-- };
--
-- VPOS_reg: VPOS {
-- /* 15v */
-- regulator-name = "VPOS";
-- };
--
-- V3P3_reg: V3P3 {
-- regulator-name = "V3P3";
-- };
-- };
-- };
--
-- mma8450 at 1c {
-- compatible = "fsl,mma8450";
-- reg = <0x1c>;
-- };
--};
--
--&i2c2 {
-- clock-frequency = <100000>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_i2c2_1>;
-- status = "okay";
--
-- codec: wm8962 at 1a {
-- compatible = "wlf,wm8962";
-- reg = <0x1a>;
-- clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
-- DCVDD-supply = <&vgen3_reg>;
-- DBVDD-supply = <®_aud3v>;
-- AVDD-supply = <&vgen3_reg>;
-- CPVDD-supply = <&vgen3_reg>;
-- MICVDD-supply = <®_aud3v>;
-- PLLVDD-supply = <&vgen3_reg>;
-- SPKVDD1-supply = <®_aud4v>;
-- SPKVDD2-supply = <®_aud4v>;
-- amic-mono;
-- };
--
-- sii902x at 39 {
-- compatible = "SiI,sii902x";
-- interrupt-parent = <&gpio2>;
-- interrupts = <10 2>;
-- mode_str ="1280x720M at 60";
-- bits-per-pixel = <32>;
-- resets = <&sii902x_reset>;
-- reg = <0x39>;
-- };
--};
--
--&i2c3 {
-- clock-frequency = <100000>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_i2c3_1>;
-- status = "disabled";
--
-- ov564x: ov564x at 3c {
-- compatible = "ovti,ov564x";
-- reg = <0x3c>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_csi_0>;
-- clocks = <&clks IMX6SL_CLK_CSI>;
-- clock-names = "csi_mclk";
-- AVDD-supply = <&vgen6_reg>; /* 2.8v */
-- DVDD-supply = <&vgen2_reg>; /* 1.5v*/
-- pwn-gpios = <&gpio1 25 1>;
-- rst-gpios = <&gpio1 26 0>;
-- csi_id = <0>;
-- mclk = <24000000>;
-- mclk_source = <0>;
-- };
--};
--
--&iomuxc {
-- pinctrl-names = "default", "sleep";
-- pinctrl-0 = <&pinctrl_hog>;
-- pinctrl-1 = <&pinctrl_hog_sleep>;
--
-- hog {
-- pinctrl_hog: hoggrp {
-- fsl,pins = <
-- MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
-- MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
-- MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
-- MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
-- MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
-- MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x80000000
-- MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x110b0
-- MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000
-- MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x80000000
-- MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x80000000
-- MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x80000000
-- MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x80000000
-- MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x170b0
-- MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x80000000
-- MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x110b0
-- MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
-- MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
-- MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
-- MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0
-- MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x1b0b0
-- MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
-- MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
-- >;
-- };
--
-- pinctrl_hog_sleep: hoggrp_sleep {
-- fsl,pins = <
-- MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x3080
-- MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x3080
-- MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x3080
-- >;
-- };
-- };
--};
--
--&kpp {
-- pinctrl-names = "default", "sleep";
-- pinctrl-0 = <&pinctrl_kpp_1>;
-- pinctrl-1 = <&pinctrl_kpp_1_sleep>;
-- linux,keymap = <
-- 0x00000067 /* KEY_UP */
-- 0x0001006c /* KEY_DOWN */
-- 0x0002001c /* KEY_ENTER */
-- 0x01000066 /* KEY_HOME */
-- 0x0101006a /* KEY_RIGHT */
-- 0x01020069 /* KEY_LEFT */
-- 0x02000072 /* KEY_VOLUMEDOWN */
-- 0x02010073 /* KEY_VOLUMEUP */
-- >;
-- status = "okay";
--};
--
--&lcdif {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_lcdif_dat_0
-- &pinctrl_lcdif_ctrl_0>;
-- lcd-supply = <®_lcd_3v3>;
-- display = <&display>;
-- status = "okay";
--
-- display: display {
-- bits-per-pixel = <16>;
-- bus-width = <24>;
--
-- display-timings {
-- native-mode = <&timing0>;
-- timing0: timing0 {
-- clock-frequency = <33500000>;
-- hactive = <800>;
-- vactive = <480>;
-- hback-porch = <89>;
-- hfront-porch = <164>;
-- vback-porch = <23>;
-- vfront-porch = <10>;
-- hsync-len = <10>;
-- vsync-len = <10>;
-- hsync-active = <0>;
-- vsync-active = <0>;
-- de-active = <1>;
-- pixelclk-active = <0>;
-- };
-- };
-- };
--};
--
--&pwm1 {
-- pinctrl-names = "default", "sleep";
-- pinctrl-0 = <&pinctrl_pwm1_0>;
-- pinctrl-1 = <&pinctrl_pwm1_0_sleep>;
-- status = "okay";
--};
--
--&pxp {
-- status = "okay";
--};
--
--&spdif {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_spdif_1>;
-- status = "okay";
--};
--
--&ssi2 {
-- fsl,mode = "i2s-slave";
-- status = "okay";
--};
--
--&uart1 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_uart1_1>;
-- status = "okay";
--};
--
--&usbotg1 {
-- vbus-supply = <®_usb_otg1_vbus>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_usbotg1_1>;
-- disable-over-current;
-- imx6-usb-charger-detection;
-- status = "okay";
--};
--
--&usbotg2 {
-- vbus-supply = <®_usb_otg2_vbus>;
-- dr_mode = "host";
-- disable-over-current;
-- status = "okay";
--};
--
--&usdhc1 {
-- pinctrl-names = "default", "state_100mhz", "state_200mhz";
-- pinctrl-0 = <&pinctrl_usdhc1_1>;
-- pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
-- pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
-- bus-width = <8>;
-- cd-gpios = <&gpio4 7 0>;
-- wp-gpios = <&gpio4 6 0>;
-- keep-power-in-suspend;
-- enable-sdio-wakeup;
-- status = "okay";
--};
--
--&usdhc2 {
-- pinctrl-names = "default", "state_100mhz", "state_200mhz";
-- pinctrl-0 = <&pinctrl_usdhc2_1>;
-- pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
-- pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
-- cd-gpios = <&gpio5 0 0>;
-- wp-gpios = <&gpio4 29 0>;
-- keep-power-in-suspend;
-- enable-sdio-wakeup;
-- status = "okay";
--};
--
--&usdhc3 {
-- pinctrl-names = "default", "state_100mhz", "state_200mhz";
-- pinctrl-0 = <&pinctrl_usdhc3_1>;
-- pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
-- pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
-- cd-gpios = <&gpio3 22 0>;
-- keep-power-in-suspend;
-- enable-sdio-wakeup;
-- status = "okay";
- };
---
-2.1.0
-
diff --git a/recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch b/recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch
deleted file mode 100644
index 4459576..0000000
--- a/recipes-kernel/linux/linux-imx-3.10.17/0010-ENGR00318392-ARM-imx6x-Save-restore-SCU-and-some-CP1.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From 4a46352d23f1f7b4f513487cb1701a8592ba980f Mon Sep 17 00:00:00 2001
-From: Ranjani Vaidyanathan <Ranjani.Vaidyanathan at freescale.com>
-Date: Fri, 13 Jun 2014 15:43:14 -0500
-Subject: [PATCH 10/10] ENGR00318392 ARM:imx6x: Save/restore SCU and some CP15
- registers across suspend/resume
-Organization: O.S. Systems Software LTDA.
-
-This patch ensures that the SCU and certain A9 CP15 registers state are maintained across
-a suspend/resume cycle:
-1. Need to ensure that SCU standby bit is set again after suspend/resume cycle, else
-the system will never WAIT mode after a suspend/resume cycle. This bit should be enabled
-on all SMP systems immaterial of whether CPUIDLE is enabled or not.
-2. Several A9 errata workarounds involve setting bits in the ARM diagnostic register.
-Save/restore this register across a suspend/resume cycle.
-3. Save and restore the A9 power control register also.
-
-Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan at freescale.com>
-(cherry picked from commit 7b5b4ef5b3cdc65c0576f87cfa52bcca1bda8b33)
-
-Upstream-Status: Pending
----
- arch/arm/mach-imx/cpuidle-imx6q.c | 5 +----
- arch/arm/mach-imx/platsmp.c | 4 +++-
- arch/arm/mach-imx/pm-imx6.c | 36 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 40 insertions(+), 5 deletions(-)
-
-diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
-index d74d0ce..9ffbd34 100644
---- a/arch/arm/mach-imx/cpuidle-imx6q.c
-+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2012-2013 Freescale Semiconductor, Inc.
-+ * Copyright (C) 2012-2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -65,9 +65,6 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
-
- int __init imx6q_cpuidle_init(void)
- {
-- /* Need to enable SCU standby for entering WAIT modes */
-- imx_scu_standby_enable();
--
- /* Set cache lpm bit for reliable WAIT mode support */
- imx6_set_cache_lpm_in_wait(true);
-
-diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
-index c6e1ab5..d2fa7ec 100644
---- a/arch/arm/mach-imx/platsmp.c
-+++ b/arch/arm/mach-imx/platsmp.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright 2011 Freescale Semiconductor, Inc.
-+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
-@@ -77,6 +77,8 @@ static void __init imx_smp_init_cpus(void)
- void imx_smp_prepare(void)
- {
- scu_enable(scu_base);
-+ /* Need to enable SCU standby for entering WAIT mode */
-+ imx_scu_standby_enable();
- }
-
- static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
-diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
-index de46b87..587cc7e 100644
---- a/arch/arm/mach-imx/pm-imx6.c
-+++ b/arch/arm/mach-imx/pm-imx6.c
-@@ -73,6 +73,8 @@ static int (*suspend_in_iram_fn)(void *iram_vbase,
- unsigned long iram_pbase, unsigned int cpu_type);
- static unsigned int cpu_type;
- static void __iomem *ccm_base;
-+static unsigned long dcr;
-+static unsigned long pcr;
-
- unsigned long save_ttbr1(void)
- {
-@@ -111,6 +113,34 @@ void imx6_set_cache_lpm_in_wait(bool enable)
- }
- }
-
-+static void imx6_save_cpu_arch_regs(void)
-+{
-+ /* Save the Diagnostic Control Register. */
-+ asm volatile(
-+ "mrc p15, 0, %0, c15, c0, 1\n"
-+ : "=r" (dcr)
-+ );
-+ /* Save the Power Control Register. */
-+ asm volatile(
-+ "mrc p15, 0, %0, c15, c0, 0\n"
-+ : "=r" (pcr)
-+ );
-+}
-+
-+static void imx6_restore_cpu_arch_regs(void)
-+{
-+ /* Restore the diagnostic Control Register. */
-+ asm volatile(
-+ "mcr p15, 0, %0, c15, c0, 1\n"
-+ : : "r" (dcr)
-+ );
-+ /* Restore the Power Control Register. */
-+ asm volatile(
-+ "mcr p15, 0, %0, c15, c0, 0\n"
-+ : : "r" (pcr)
-+ );
-+}
-+
- static void imx6_enable_rbc(bool enable)
- {
- u32 val;
-@@ -290,8 +320,14 @@ static int imx6_pm_enter(suspend_state_t state)
- imx_gpc_pre_suspend(true);
- imx_anatop_pre_suspend();
- imx_set_cpu_jump(0, v7_cpu_resume);
-+
-+ imx6_save_cpu_arch_regs();
-+
- /* Zzz ... */
- cpu_suspend(0, imx6_suspend_finish);
-+
-+ imx6_restore_cpu_arch_regs();
-+
- if (!cpu_is_imx6sl())
- imx_smp_prepare();
- imx_anatop_post_resume();
---
-2.1.0
-
--
2.1.3
More information about the meta-freescale
mailing list