[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2014-08-31

[Otavio Salvador]

Hello,

I pushed following updates:

commit 948ebb4f69a2fc439eac3929a66a7108bd2b0c28 (HEAD, fslc/master-next, fslc/master, pending)
Author: Christoph Settgast <christoph.settgast at methodpark.de>
Date:   Wed Aug 27 12:19:03 2014 +0200

    linux-boundary (3.10.17): update to 62ef71f
    
    This includes the following changes, the defconfig
    changes are reflected in the yocto defconfigs to
    keep things in sync.
    
    Eric Nelson (39):
          nit6xlite_defconfig: add LEDS_GPIO
          sabrelite: configure ethernet PHY nRST
          nitrogen6x: configure ethernet PHY nRST
          nitrogen6_mtp: configure ethernet PHY nRST
          nitrogen6_max: configure ethernet PHY nRST
          nit6xlite: configure ethernet PHY nRST
          nit6xlite: default to multi-touch input for eGalax, ft5x06
          nitrogen6x: default to multi-touch input for eGalax, ft5x06
          nitrogen6x_ub: default to multi-touch input for eGalax, ft5x06
          ft5x06: free GPIO in _remove
          ft5x06: add support for ABS_MT_TRACKING_ID
          ft5x06: set MAX_TOUCHES to 12
          ft5x06: respect/return tracking id from controller
          net: fec: iMX6 FEC does not support half-duplex gigabit
          nit*_defconfig: add CONFIG_USB_FUNCTIONFS=m
          nit*_defconfig: add CONFIG_USB_SERIAL_GENERIC
          nit6xlite: add ili210x touch controller
          nitrogen6x: add ili210x touch controller
          sabrelite: add ili210x touch controller
          nitrogen6_max: add ili210x touch controller
          nit6xlite_defconfig: add ILI210X touch screen
          nitrogen6x_defconfig: add ILI210X touch screen
          ili210x: Allow use with Device Tree
          nitrogen6_max: enable FEC ethernet
          nitrogen6_max: swap NANDF_CS0/1 (GP6:11/14) for SD3 voltage select, WL IRQ
          nitrogen6_max: define ENET_TXD1 as GPIO1:29 for amplifier mute
          flexcan: allow use with transceivers that only have standby pin
          nitrogen6x: SDIO is 1.8V-only, add flag in DTS
          sdhci: Allow platform_set_power callback
          sdhci-imx: Add power-gpio support
          nitrogen6x: use power-gpio instead of vqmmc-supply to control WL_EN pin
          nitrogen6_max: use power-gpio instead of vqmmc-supply to control WL_EN pin
          nitrogen6_max: configure voltage-select pin
          nit6xlite: flag 1.8v quirk for vqmmc on sdhc2 (WiFi interface)
          DT:imx6qdl: Pad SD2_DAT3 should have pull-down
          nitrogen6x_defconfig: include LEDS_PWM, SPI_SPIDEV
          Add imx6q-sabrelite-nolcd device tree
          fec: Add disable_giga parameter to force 10/100 operation
          Revert "DT:imx6qdl: Pad SD2_DAT3 should have pull-down"
    
    Ranjani Vaidyanathan (1):
          ENGR00318392 ARM:imx6x: Save/restore SCU and some CP15 registers across suspend/resume
    
    Signed-off-by: Christoph Settgast <christoph.settgast at methodpark.de>
    Reviewed-by: Eric Nelson <eric.nelson at boundarydevices.com>
    Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

Regards,

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750