[meta-freescale] [meta-fsl-arm][PATCH 07/14] imx6sxsabresd.conf: Create i.MX 6SoloX Machine configuration

[Daiane Angolini]

On Wed, Aug 27, 2014 at 4:07 PM, Lauren Post <lauren.post at freescale.com> wrote:
> Signed-off-by: Lauren Post <lauren.post at freescale.com>
> ---
>  conf/machine/imx6sxsabresd.conf |   21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 conf/machine/imx6sxsabresd.conf
>
> diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
> new file mode 100644
> index 0000000..070c1ef
> --- /dev/null
> +++ b/conf/machine/imx6sxsabresd.conf
> @@ -0,0 +1,21 @@
> +#@TYPE: Machine
> +#@NAME: Freescale i.MX6SoloX SabreSD
> +#@SOC: i.MX6SX
> +#@DESCRIPTION: Machine configuration for Freescale i.MX6SoloX Sabre SD

Maintainer?

> +
> +require conf/machine/include/imx6sabresd-common.inc

You can use
require imx6sabresd-common.inc

instead here

> +
> +SOC_FAMILY = "mx6:mx6sx"
> +
> +KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb"
> +KERNEL_DEVICETREE += "imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb imx6sx-sdb-canfd.dtb"
> +
> +UBOOT_ENTRYPOINT = "0x80008000"
> +PREFERRED_PROVIDER_u-boot = "u-boot-imx"

>From that I assume there is no imx6sxsabresd u-boot-fslc support so far, right?

> +
> +UBOOT_CONFIG ??= "sd"
> +UBOOT_CONFIG[sd] = "mx6sxsabresd_config,sdcard"
> +UBOOT_CONFIG[emmc] = "mx6sxsabresd_emmc_config,sdcard"
> +UBOOT_CONFIG[qspi2] = "mx6sxsabresd_qspi2_config"
> +UBOOT_CONFIG[m4fastup] = "mx6sxsabresd_m4fastup_config"
> +UBOOT_CONFIG[mfgtool] = "mx6sxsabresd_config"

nice

Daiane