[meta-freescale] [meta-fsl-arm][PATCH 06/14] imx6slevk.conf: Add the imx6sl-evk-pf200 device tree

[Daiane Angolini]

On Wed, Aug 27, 2014 at 4:07 PM, Lauren Post <lauren.post at freescale.com> wrote:
> Add support for pfuze200 on imx6sl-evk

If you don´t mind. I prefer if you use the machine name here.

Instead of imx6sl-evk, please, use imx6slevk

Daiane
>
> Move pmic device node from imx6sl-evk.dtsi to upper-level, and add
> another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile
> only works in ldo-enable mode if using pfuze200, since 'SW1C' switch
> regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have
> to share the same switch regulator
>
> Signed-off-by: Lauren Post <lauren.post at freescale.com>
> ---
>  conf/machine/imx6slevk.conf |    1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
> index cffbd0b..9dc0185 100644
> --- a/conf/machine/imx6slevk.conf
> +++ b/conf/machine/imx6slevk.conf
> @@ -10,6 +10,7 @@ include conf/machine/include/tune-cortexa9.inc
>  SOC_FAMILY = "mx6:mx6sl"
>
>  KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb"
> +KERNEL_DEVICETREE += "imx6sl-evk-pf200.dtb"
>
>  UBOOT_CONFIG ??= "sd"
>  UBOOT_CONFIG[sd] = "mx6slevk_config,sdcard"
> --
> 1.7.9.5
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale