[meta-freescale] [meta-fsl-arm-extra][PATCH v2 1/3] cgtqmx6: Update Congatec-QMX6 machine configuration
Alejandro.de-cabo-Garcia at congatec.com
Alejandro.de-cabo-Garcia at congatec.com
Wed Aug 20 07:16:21 PDT 2014
Hi Otavio,
> Hello Alex,
>
> On Wed, Aug 20, 2014 at 5:51 AM, Alex de Cabo
> <alejandro.de-cabo-garcia at congatec.com> wrote:
> > Update config file:
> >
> > * Preferred kernel version: 3.10.17
> > * Preferred uboot version: 2013.04
>
> These two are not need as the 3.10.17 is indeed newer than the 3.0.35
> and the u-boot is a single provider.
Ok, I will remove the Preferred_version for both and also remove the old
kernel and u-boot recipes, keeping just 3.10.17 and 2013.08
>
> > * Set build image: tar.bz2
>
> Do you not intend to have users using the sdcard?
>
In order to save building time I just generate the tar.bz2 and then untar
it into the sdcard. I will remove it.
> > * Append firmware for Solo and DualLite: imx-vpu-imx6d
>
> Check how we did for cubox-i; it has support for a single rootfs for
QDL.
>
Done.
> > * Variable PARTNUMBER have to be specified according to the module
> > partnumber. The possible values are:
> > PN016100, PN016101, PN016102, PN016103, PN016104, PN016105, PN016106,
> > PN016110, PN016111, PN016112, PN016113
>
> Can you clarify why?
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140820/2a48b30d/attachment.html>
More information about the meta-freescale
mailing list