[meta-freescale] [meta-fsl-arm-extra][PATCH v2 1/3] cgtqmx6: Update Congatec-QMX6 machine configuration

[Alex de Cabo]

Update config file:

* Preferred kernel version: 3.10.17
* Preferred uboot version: 2013.04
* Set build image: tar.bz2
* Append firmware for Solo and DualLite: imx-vpu-imx6d
* Variable PARTNUMBER have to be specified according to the module
partnumber. The possible values are:
PN016100, PN016101, PN016102, PN016103, PN016104, PN016105, PN016106,
PN016110, PN016111, PN016112, PN016113

Signed-off-by: Alex de Cabo <alejandro.de-cabo-garcia at congatec.com>
---
 conf/machine/cgtqmx6.conf | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/conf/machine/cgtqmx6.conf b/conf/machine/cgtqmx6.conf
index 467379a..567c4c2 100644
--- a/conf/machine/cgtqmx6.conf
+++ b/conf/machine/cgtqmx6.conf
@@ -8,16 +8,28 @@ include conf/machine/include/tune-cortexa9.inc
 
 SOC_FAMILY = "mx6:mx6q"
 
-# Use u-boot imx
+# Use u-boot QMX6
 UBOOT_SUFFIX = "bin"
 UBOOT_PADDING = "2"
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_VERSION_u-boot-imx = "2009.08"
+PREFERRED_PROVIDER_u-boot = "u-boot-qmx6"
+PREFERRED_VERSION_u-boot-qmx6 = "2013.04"
 
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-congatec"
+## Set the partnumber
+PARTNUMBER ?= ""
 
-UBOOT_MACHINE = "cgtqmx6_config"
+#Use linux kernel QMX6
+PREFERRED_PROVIDER_virtual/kernel = "linux-qmx6"
+
+## Linux kernel 3.10.17
+PREFERRED_VERSION_linux-qmx6 = "3.10.17"
+KERNEL_DEVICETREE = "imx6q-qmx6.dtb imx6dl-qmx6.dtb"
 
 SERIAL_CONSOLE = "115200 ttymxc1"
 
 MACHINE_FEATURES += " pci"
+
+#Append the VPU firmware for Solo/DualLite
+MACHINE_FIRMWARE_append = " firmware-imx-vpu-imx6d"
+
+#Create only tar.bz2 image
+IMAGE_FSTYPES = "tar.bz2"
-- 
1.9.1