[meta-freescale] Qt on Wandboard-solo with Yocto -Problem
Nilesh Kokane
nilesh.kokane at mindastoneridge.com
Fri Aug 8 00:56:11 PDT 2014
Hi Alfonso,
Can you run the environmental setup script located in your /opt/poky/1.6.1
directory before running qtcreator from the terminal?
I just ran the script /opt/poky/1.6.1 and then opened the qtcreator from
the console but the ld error are the same
I see in the errors that
/usr/lib/gcc-cross/arm-linux-gnueabi/4.7/../../../../arm-linux-gnueabi/bin/ld:
cannot find /lib/libpthread.so.0 inside
why is the usr/lib/gcc-cross is creating ld error and not poky compiler
instead.?
can you please suggest
On Fri, Aug 8, 2014 at 11:06 AM, Alfonso Tamés <alfonso at tames.com> wrote:
>
> Nilesh,
>
> Can you run the environmental setup script located in your /opt/poky/1.6.1
> directory before running qtcreator from the terminal?
>
> Good luck,
>
> Alfonso
>
> On Aug 7, 2014, at 11:21 PM, Nilesh Kokane <
> nilesh.kokane at mindastoneridge.com> wrote:
>
> Hi Alfonso,
>
> bitbake core-image-minimal and bitbake meta-toolchain-qt5
>
> Both gave me success today. Thanks to you for the assistance.
>
>
> But after setting the qt creator and running the example clocks code its
> giving me the ld errors as follows
>
> 09:41:15: Running steps for project clocks...
> 09:41:15: Configuration unchanged, skipping qmake step.
> 09:41:15: Starting: "/usr/bin/make"
> arm-linux-gnueabi-g++ -o clocks main.o qrc_clocks.o
> -L/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/lib
> -lQt5Quick -lQt5Qml -lQt5Network -lQt5Gui -lQt5Core -lGLESv2 -lpthread
> /usr/lib/gcc-cross/arm-linux-gnueabi/4.7/../../../../arm-linux-gnueabi/bin/ld:
> cannot find /lib/libpthread.so.0 inside
> /usr/lib/gcc-cross/arm-linux-gnueabi/4.7/../../../../arm-linux-gnueabi/bin/ld:
> cannot find /usr/lib/libpthread_nonshared.a inside
> collect2: error: ld returned 1 exit status
> make: *** [clocks] Error 1
> 09:41:15: The process "/usr/bin/make" exited with code 2.
> Error while building/deploying project clocks (kit: wandboard)
> When executing step 'Make'
> 09:41:15: Elapsed time: 00:00.
>
>
>
>
--
Thanks
Nilesh Kokane
--
“The contents of this e-mail message and any attachments are confidential
and are intended solely for addressee. The information may also be legally
privileged. This transmission is sent in trust, for the sole purpose of
delivery to the intended recipient. If you have received this transmission
in error, any use, reproduction or dissemination of this transmission is
strictly prohibited. If you are not the intended recipient, please
immediately notify the sender by reply e-mail or phone and delete this
message and its attachments, if any.”
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140808/16bf9b11/attachment.html>
More information about the meta-freescale
mailing list