[meta-freescale] Can't select my own Kernel source

[John Weber]

Filip,

On 8/7/14, 9:00 AM, filip.ghimpeteanu at freescale.com wrote:
> Hi Gary,
>
> I had both of them added to the local.conf.
>
> The "_" typo was only present in the mail, sorry, in the recipe I put it with "-".
>
> Filip.
>
> On 2014-08-07 07:38, filip.ghimpeteanu at freescale.com wrote:
>> Yes it is available. Also when building it shows on the prompt that my
>> recipe is being baked.
>>
>> What do you mean by checking local.conf and machine.conf?
>> I placed the <PREFERRED_PROVIDER_virtual/kernel = "linux-yocto_myproj"> in local.conf.
> I think this should be
>     PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-myproj"
> there's a difference between "-" and "_".  Also, you could add
>     PREFERRED_VERSION_linux-yocto-myproj = "3.10%"
>
>> A snapshot of the build log:
>> ----------------------------------------------------------------------
>> ---------------------------------
>>
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_kernel_link_vmlinux: Started
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_compile_kernelmodules: Started
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_uboot_mkimage: Started
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_uboot_mkimage: Succeeded
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_kernel_link_vmlinux: Succeeded
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_compile_kernelmodules: Succeeded
>> NOTE: Running task 1827 of 1849 (ID: 88,
>> /home/filip/YOCTO_DISK/fsl-arm-bsp/sources/meta-fsl-filip/recipes-fili
>> p/linux-yocto-myproj/linux-yocto-myproj_3.10.bb, do_strip)
>> NOTE: recipe linux-yocto-myproj-3.10.17+gitAUTOINC+db725c88c7-r1: task
>> do_strip: Started
>> ----------------------------------------------------------------------
>> -------------------------------------------------
>>
>> I have also attached the output in the mail.
>>
>> Filip.
>>
>> Did you try bitbake-layers show-recipes to see if your recipe is available ?
>> You can also check your local.conf and machine.conf
>>
>>
>> On 08/07/2014 02:56 PM, filip.ghimpeteanu at freescale.com wrote:
>>> Hi Stephane,
>>>
>>> Yes I tried, but the build is done with the 3.15.0-rc2-yocto-standard
>>>
>>> Filip
>>>
>>> -----Original Message-----
>>> From: scerveau [mailto:scerveau at gmail.com]
>>> Sent: Thursday, August 07, 2014 3:14 PM
>>> To: Ghimpeteanu Filip-B50611; meta-freescale at yoctoproject.org
>>> Subject: Re: [meta-freescale] Can't select my own Kernel source
>>>
>>> Hello,
>>>
>>> Did you change your conf file with this ?
>>> PREFERRED_PROVIDER_virtual/kernel = "linux-yocto_myproj"
>>>
>>> BR.
>>>
>>> Stephane
>>> On 08/07/2014 12:30 PM, filip.ghimpeteanu at freescale.com wrote:
>>>> Hello,
>>>>
>>>> I am trying to build a custom kernel from local sources.
>>>> I followed the instructions described in Lab4 of Tom Zanussi's and
>>>> Darren Hart's "Hands-on Project" [1], but apparently the
>>>> linux-timesys recipe executes instead of mine. The resulting kernel
>>>> is 3.0.15 (the one specified by the linux-timesys) instead of mine
>>>> which is 3.10.17
>>>>
>>>> How can I tell Bitbake to use the Kernel from my local sources?
>>>>
>>>>
>>>> This is a snapshot of my recipe:
>>>> --------------------------------------------------------------------
>>>> -
>>>> -
>>>> --------
>>>> .../meta-fsl-filip/recipes-filip/linux-yocto-myproj/linux-yocto-mypr
>>>> o
>>>> j
>>>> _3.10.bb
At the risk of sounding ignorant - I think that the directory structure here is 
important?  Not sure.

You might want to try creating a directory:
meta-fsl-filip/recipes-kernel/linux/

and move the recipe (and defconfig) there.

>>>> ----------------------------------------
>>>>
>>>> inherit kernel
>>>> require recipes-kernel/linux/linux-yocto.inc
>>>>
>>>> SRC_URI = "git:///home/filip/YOCTO_DISK/Kernels/linux-rayleigh;protocol=file;nocheckout=1"
>>>> SRC_URI += "file://defconfig"
>>>>
>>>> KBRANCH = "fbdcu_dev"
>>>>
>>>> LINUX_VERSION ?= "3.10.17"
>>>> LINUX_VERSION_EXTENSION ?= "-custom"
>>>>
>>>> SRCREV_machine="${AUTOREV}"
>>>> SRCREV="${AUTOREV}"
>>>>
>>>> PR = "r0"
>>>> PV = "${LINUX_VERSION}+git${SRCPV}"
>>>>
>>>> COMPATIBLE_MACHINE = "twr-vf65gs10"
>>>> ----------------------------------------
>>>>
>>>> [1]: http://goo.gl/MQDzw6
>>>>
>>>> Thank you,
>>>> Ghimpeteanu Filip.
>>
>>
>