[meta-freescale] Updates to meta-fsl-arm-extra (daisy) in 2014-08-05
Otavio Salvador
otavio at ossystems.com.br
Tue Aug 5 13:46:53 PDT 2014
Hello,
I pushed following updates:
commit 32f0d1b0827b368626e11edfbd2f39d7fd28f35b (fslc/daisy)
Author: Otavio Salvador <otavio at ossystems.com.br>
Date: Thu Jul 10 15:07:41 2014 -0300
cubox-i: Add HummingBoard in NAME field
The Layer index and the release notes script use the NAME field to
identify the boards supported. Add HummingBoard to the field.
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 0cc8736478fabd7c668e98f5450927ad1883b7a1
Author: John Weber <rjohnweber at gmail.com>
Date: Tue Aug 5 10:56:11 2014 -0500
linux-wandboard (3.0.35): remove recipe and associated files
Now that kernel 3.0.35 is no longer being updated, and that 3.10.17 is now GA and
supports current GPU libraries, remove linux-wandboard (3.0.35).
Signed-off-by: John Weber <rjohnweber at gmail.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit ca8960094a156278f98069d5fffa7e30cc53ff30
Author: John Weber <rjohnweber at gmail.com>
Date: Tue Aug 5 10:56:10 2014 -0500
linux-firmware: add bbappend to modify firmware file names
Upstream changes to the brcmfmac driver require a change to the firmware
file names to match the devid and interface type of the Broadcom chipset.
This also makes it easier for one machine to support multiple chipets in
Yocto.
This patch has been changed to adapt to the linux-firmware version
used in Daisy branch which is based on an older version of linux-firmware
repository.
Signed-off-by: John Weber <rjohnweber at gmail.com>
Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit df40053e83bec45640aa84f3b9effaafcefd97ab
Author: John Weber <rjohnweber at gmail.com>
Date: Tue Aug 5 10:56:09 2014 -0500
linux-wandboard (3.10.17): Update SRCREV to 8e81319 and update defconfig
The update to the Wandboard Linux kernel includes the following changes:
- wandboard_defconfig: Enable CONFIG_USB_OTG
- wandboard/dts: Fix USB OTG
- wand-rfkill: Change gpio depending on wandboard revision
- wandboard: dts: Add alternate pin support for rev C1
- brcmfmac: Use fw filename and nvram based of devid for sdio.
- wandboard: add revision detect pin to rfkill driver
- wandboard/dts: change EDM gpio to open drain
- wandboard/dts: Enable lcdif in devicetree
- wandboard/dts: add fusion touchscreen to devicetree
- wandboard: Fix bluetooth
- wandboard_defconfig: Enable support for Fusion touchscreen, Sunplus
keyboard, and some USB to serial devices.
Signed-off-by: John Weber <rjohnweber at gmail.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 9fcb156b78a33e607830303abbd2aa608dcc3485
Author: John Weber <rjohnweber at gmail.com>
Date: Tue Aug 5 10:56:08 2014 -0500
broadcom-nvram-config: separate recipes to different chipsets
Upstream driver changes cause the driver to request firmware based on
the device ID (e.g. 4329, 4330). This also applies to the nvram config
file. Restructure the recipes and separate by chipset.
Modify conf/machine to use chipset-specific broadcom nvram packages
Signed-off-by: John Weber <rjohnweber at gmail.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Regards,
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list