[meta-freescale] imxq6 sabre sd locks up when starting Qt5_Cinematic experience
Konstantin Kovalev
lepeletie at hotmail.com
Fri Aug 1 04:52:14 PDT 2014
Dear Gunnar,
You could try to enter in your u-boot and then do :
>editenv fdt_file
>fdt_file=imx6q-sabresd.dtb -> fdt_file=imx6q-sabresd-ldo.dtb
>saveenv
>reset
For me it works.
Best Regards,
Konstantin.
________________________________
> From: gunnar.roth at gmx.de
> To: meta-freescale at yoctoproject.org
> Date: Fri, 1 Aug 2014 13:18:35 +0200
> Subject: [meta-freescale] imxq6 sabre sd locks up when starting
> Qt5_Cinematic experience
>
> Hello,
> I am using IMX6Q SABRE SD board for evaluating purposes of qt5 . about
> two moth ago all as working fine with qt 5.2.1 to 5.3.0 using meta-qt5
> layer.
> Recently I started fresh and use repo like this
> ~/repo init -u https://github.com/Freescale/fsl-community-bsp-platform
> -b master; ~/repo sync
> git clone -b jansa/master https://github.com/meta-qt5/meta-qt5.git
> after changing bitbake.conf to use http instead of ftp for debian.org (
> i am behind a firewall,which blocks ftp here) everything builds well.
> But the first problem is that it is trying to mount root filesystem on
> "mmcblk1p2 instead of "mmcblk0p2 as it did before. using editenv
> mmcroot, that can be fixed.
> but I have read that should be fixed in master in this mailing list
> and i pulled again to get this change but to no avail.
> But the most serious problem is that starting Qt5_CinematicExperience
> freezes the eval board after the screen going black.
> ( i also tried master-next branches and even daisy but that does not
> compile with meta-qt5 branches having qt 5.3.1)
> I read about another freeze where "The solution is just change
> "fdt_file=imx6q-sabresd.dtb" to "fdt_file=imx6q-sabresd-ldo.dtb". but
> sadly I have no clue what to do here.
> I would be very glad if anyone can shed some light on the solution to
> my problem.
> Best regards,
> Gunnar Roth
>
> -- _______________________________________________ meta-freescale
> mailing list meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
More information about the meta-freescale
mailing list