[meta-freescale] CAN0 in 3.10.17 on IMX6QSabreAuto

[Morgan McKenzie]

Hi Lauren,

Thanks, that's very helpful!
For anyone else who runs into this - imx6q-sabreauto-flexcan1.dtb is already included in the uImage by default so all you need to do to enable it is change the u-boot parameter fdt_file to point to that file instead.

Morgan
From: Lauren.Post at freescale.com
To: rmtm at uvic.ca; meta-freescale at yoctoproject.org
Subject: RE: [meta-freescale] CAN0 in 3.10.17 on IMX6QSabreAuto
Date: Mon, 28 Apr 2014 12:34:12 +0000









I asked the kernel team and this is their response
 
New kernel does not support the kernel command line like can0 after we switch to use device-tree
 
Users can use imx6q-sabreauto-flexcan1.dtb to enable flexcan1.
NOTE: flexcan1 is conflict with fec on pins.

So with imx6q-sabreauto-flexcan1.dtb, the fec will be disabled
 
Hope this helps.


Lauren
 
 


From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-bounces at yoctoproject.org]
On Behalf Of Morgan McKenzie

Sent: Saturday, April 26, 2014 4:59 PM

To: meta-freescale at yoctoproject.org

Subject: [meta-freescale] CAN0 in 3.10.17 on IMX6QSabreAuto


 


Hi,


 


 


I've been looking into using the newer kernel with my development as it seems to have fixed a few issues I'm running into with the older one.


 


I was trying to enable both CAN channels and passing 'can0' on the kernel command line doesn't seem to do anything any more - has the syntax changed for enabling the second channel or has
 that functionality not been added yet?


 


 


Thanks!


 


 


Morgan McKenzie


 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140429/461ab592/attachment.html>