[meta-freescale] R: Core-image-x11 don't boot

[Riccardo Stronati]

Ok, I' ll do it. I'd like to let you know that I have already
successfully built yocto 1.5 fot this board without any problem.

Thank you.

Inviata dal mio Windows Phone Da: Otavio Salvador
Inviato: ‎29/‎04/‎2014 00.20
A: Riccardo Stronati
Cc: Daiane Angolini; meta-freescale at yoctoproject.org
Oggetto: Re: [meta-freescale] Core-image-x11 don't boot
Hello Riccardo,

On Mon, Apr 28, 2014 at 6:39 PM, Riccardo Stronati <r.stronati at gmail.com> wrote:
> I'm testing Yocto 1.6 on edm1-fairy board which is an imx6 based board
> (http://www.technexion.com/index.php/products/edm/edm-carrier-boards/edm1-fairy).
>
> I need at least the core-image-x11 image to get Qt5 support.
>
> When I boot the board I get this error:
>
> [    5.019809] mmcblk1: mmc2:0007 SD08G 7.41 GiB
> [    5.030470]  mmcblk1: p1 p2
> [    5.051932] EXT4-fs (mmcblk1p2): mounting ext3 file system using the ext4
> subsystem
> [    5.267823] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data
> mode. Opts: (null)
> [    5.276074] VFS: Mounted root (ext3 filesystem) on device 179:26.
> [    5.298443] devtmpfs: mounted
> [    5.301625] Freeing init memory: 180K
> sh: cannot set terminal process group (-1): Inappropriate ioctl for device
> sh: no job control in this shell
> sh-4.3#
>
> This is the uname output:
> Linux failyboard 3.0.35-4.1.0-edm_fairy+ga97aa82 #1 SMP PREEMPT Mon Apr 28
> 21:53:12 CEST 2014 armv7l GNU/Linux
>
> I have to tell that during the do_rootfs task I get an error about
> initscripts:
> Computing transaction error... Can't install dbus etc etc
> I wrote on the irc channel that told me to run "bitbake initscripts", after
> that the roofs task get done but the board doesn't boot.

This seems like a defconfig error. Please contact TechNexion people
regarding this as this is not supported by our layers.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750