[meta-freescale] R: Imx53 sd card read write timing

[Otavio Salvador]

On Thu, Oct 31, 2013 at 2:35 PM, Daiane Angolini <daiane.list at gmail.com> wrote:
> On Thu, Oct 31, 2013 at 2:21 PM, Otavio Salvador
> <otavio at ossystems.com.br> wrote:
>> On Thu, Oct 31, 2013 at 2:11 PM, Daiane Angolini <daiane.list at gmail.com> wrote:
>>> On Thu, Oct 31, 2013 at 1:20 PM, Simone <cjb.sw.nospam at gmail.com> wrote:
>>>> Hello Daiane,
>>>> you are my lifeline...
>>>>
>>>> My kernel is the linux-fsl (linux-2.6.35.3) with some changes made for
>>>> configure the GPIOs and UARTs in our board (in mx53_loco.c)
>>>> The bootloader I'm using is U-Boot 2013.10-rc3
>>>
>>> Perfect!
>>>
>>> Only because I don´t remember if it´s applied or not on this version,
>>> please use this patch
>>> http://u-boot.10912.n7.nabble.com/PATCH-ARM-mx5-Enable-L2-cache-td164390.html
>>
>> It is not; if Simone confirms it helps I can apply it in our branch.
>
> Well, this particular decision should be for Fabio.
>
> I´m not sure if the patch is supposed to be applied in 2013.10 or only
> next .....

It is queued for 2014.01 (as Stefano just confirmed it is going to be
applied) so if Fabio agrees, we can apply it in our branch.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750