[meta-freescale] meta-fsl-ivi installation

Wed Oct 30 23:32:44 PDT 2013

Hi,

Use the just updated instructions
https://github.com/Freescale/meta-fsl-ivi/tree/5.0

For poky use "dora" branch
For meta-fsl-arm use "dora" branch
For meta-ivi use "5.0" branch
For meta-fsl-ivi use "5.0" branch

And build

bitbake gemini-image

Regards

On Wed, Oct 30, 2013 at 11:17 PM, Krishna <krishnaks at iwavesystems.com>wrote:

>   Hi,
>
> My configuration also same & I am building foton-image
>
> bitbake foton-image.
>
> I have followed instruction as per the following link.
> *https://github.com/Freescale/meta-fsl-ivi*
>
> Regards,
> Krishna
> **
>
>  *From:* Adrian Alonso <aalonso00 at gmail.com>
> *Sent:* Thursday, October 31, 2013 12:13 AM
> *To:* Krishna <krishnaks at iwavesystems.com>
> *Cc:* meta-freescale at yoctoproject.org
> *Subject:* Re: [meta-freescale] meta-fsl-ivi installation
>
>  Hi Krishna,
>
> This is my build configuration
>
> BB_VERSION        = "1.20.0"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Ubuntu-13.10"
> TARGET_SYS        = "arm-oe-linux-gnueabi"
> MACHINE           = "imx6qsabreauto"
> DISTRO            = "fsl-ivi-vfb"
> DISTRO_VERSION    = "0.0.1"
> TUNE_FEATURES     = "armv7a vfp neon callconvention-hard cortexa9"
> TARGET_FPU        = "vfp-neon"
> meta
> meta-yocto        = "dora:faf8f8660fae26a14578738b642fdeb08bcb9d54"
> meta-ivi          = "5.0:85bb8821f5db024a67270b5e32220ca9efb48ff9"
> meta-fsl-arm      = "dora:520339d3266bfd07bb2e593f70489efe4d98baa2"
> meta-fsl-ivi      = "5.0:2d25d142e45d0faa8912eba2a81161b9be0cad48"
>
> My bblayer configuration looks like:
>
> BBLAYERS ?= " \
>   /home/aalonso/workspace/fsl/poky/meta \
>   /home/aalonso/workspace/fsl/poky/meta-yocto \
>   /home/aalonso/workspace/fsl/poky/meta-ivi \
>   /home/aalonso/workspace/fsl/poky/meta-fsl-arm \
>   /home/aalonso/workspace/fsl/poky/meta-fsl-ivi \
>   "
>
> And I'm building the gemini-image
>
> bitbake gemini-image
>
> Your issue seems that you are mixing layers that are compatible with
> meta-ivi
>
> Looks that the rigth thing to do is to create a similar repo like
> https://github.com/Freescale/fsl-community-bsp-platform
> so any one can recrate the project components needed a easily replicate
> the setup
>
> Regards
> Adrian
>
>
>
> On Tue, Oct 29, 2013 at 11:46 PM, Krishna <krishnaks at iwavesystems.com>wrote:
>
>>   Hi Adrian,
>>
>> I have followed the instructions in the read me file.
>>
>> But the problem I faced is I was getting build error as libXfont not
>> found which error will go only after adding X11 in DISTRO features. Is that
>> my mistake?
>>
>> Regards,
>> Krishna
>>
>>
>>  *From:* Adrian Alonso <aalonso00 at gmail.com>
>> *Sent:* Wednesday, October 30, 2013 10:41 AM
>>  *To:* Krishna <krishnaks at iwavesystems.com>
>> *Cc:* meta-freescale at yoctoproject.org
>> *Subject:* Re: [meta-freescale] meta-fsl-ivi installation
>>
>>   Hi Krishna,
>>
>> As the instructions from the README file
>>
>> You need to set
>>
>> DISTRO ?= "fsl-ivi-vfb"
>>
>>
>> This overrides any dependency on X11 and uses MXGAL as graphic backend
>>
>>
>> The MXGAL graphics backend for the Genivi LayerManager enables the
>> composition tasks of LayerManager to be accelerated using the 2D
>> raster GPU present on the Freescale i.MX6 processors.
>>
>>
>> And as per meta-ivi instructions
>>
>> http://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/README.md?h=5.0
>>
>>
>> you should be using poky instead of oe-core + meta-openembedded as can lead to "bb" recipes integration issues
>>
>> as you are experiencing.
>>
>>
>> Regards
>>
>> Adrian
>>
>>
>>
>> On Mon, Oct 28, 2013 at 2:39 AM, Krishna <krishnaks at iwavesystems.com>wrote:
>>
>>>   Hi,
>>>
>>> Anyone tried with IVI layer added image/foton image?
>>> For me on display nothing is coming and debug logs also stopping after
>>> *"turn off boot console ttymxc3".*
>>> I have enabled X11 to solve build errors.
>>>
>>> Thanks in advance
>>> **
>>>
>>>  *From:* Krishna <krishnaks at iwavesystems.com>
>>> *Sent:* Friday, October 25, 2013 4:03 PM
>>> *To:* meta-freescale at yoctoproject.org
>>>  *Subject:* Re: [meta-freescale] meta-fsl-ivi installation
>>>
>>>     Hi,
>>>
>>> With X11 enabled, we are able to build foton image. But on display
>>> nothing is coming and
>>> Debug logs are stopping at
>>>
>>> *"turn off boot console ttymxc3"*
>>> **
>>> After that no print is coming.
>>>
>>> Regards,
>>> Krishna
>>> -----Original Message-----
>>> From: Erik Botö
>>> Sent: Thursday, October 24, 2013 4:37 PM
>>> To: Krishna
>>> Cc: meta-freescale at yoctoproject.org
>>> Subject: Re: [meta-freescale] meta-fsl-ivi installation
>>>
>>> Hi,
>>>
>>> On Thu, Oct 24, 2013 at 11:37 AM, Krishna <krishnaks at iwavesystems.com>
>>> wrote:
>>> > Hi Eric,
>>> >
>>> > Where Exactly this libXfont should be there?
>>>
>>> I'm not using the layers you are, so I cannot answer all your
>>> questions. I just tried to give you some hints.
>>>
>>> The recipe for libxfont should be in
>>> poky/meta/recipes-graphics/xorg-lib/. I looked in the dylan-branch [1]
>>> of poky and it's there so if you don't have that file you must have
>>> the wrong thing checked out. It's also there in newer versions of
>>> poky.
>>>
>>> [1] -
>>> http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-graphics/xorg-lib/libxfont_1.4.5.bb?h=dylan
>>>
>>> Cheers,
>>> Erik
>>>
>>> _______________________________________________
>>> meta-freescale mailing list
>>> meta-freescale at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>
>>>
>>
>>
>> --
>> Saludos
>> Adrian Alonso
>> http://aalonso.wordpress.com
>>
>
>
>
> --
> Saludos
> Adrian Alonso
> http://aalonso.wordpress.com
>

-- 
Saludos
Adrian Alonso
http://aalonso.wordpress.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131031/fd5fca62/attachment.html>