[meta-freescale] meta-fsl-ivi installation

Krishna krishnaks at iwavesystems.com
Wed Oct 30 22:17:49 PDT 2013


Hi,

My configuration also same & I am building foton-image

bitbake foton-image.

I have followed instruction as per the following link.
https://github.com/Freescale/meta-fsl-ivi

Regards,
Krishna


From: Adrian Alonso 
Sent: Thursday, October 31, 2013 12:13 AM
To: Krishna 
Cc: meta-freescale at yoctoproject.org 
Subject: Re: [meta-freescale] meta-fsl-ivi installation

Hi Krishna, 

This is my build configuration

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-13.10"
TARGET_SYS        = "arm-oe-linux-gnueabi"
MACHINE           = "imx6qsabreauto"
DISTRO            = "fsl-ivi-vfb"
DISTRO_VERSION    = "0.0.1"
TUNE_FEATURES     = "armv7a vfp neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta              
meta-yocto        = "dora:faf8f8660fae26a14578738b642fdeb08bcb9d54"
meta-ivi          = "5.0:85bb8821f5db024a67270b5e32220ca9efb48ff9"
meta-fsl-arm      = "dora:520339d3266bfd07bb2e593f70489efe4d98baa2"
meta-fsl-ivi      = "5.0:2d25d142e45d0faa8912eba2a81161b9be0cad48"

My bblayer configuration looks like:

BBLAYERS ?= " \ 
  /home/aalonso/workspace/fsl/poky/meta \
  /home/aalonso/workspace/fsl/poky/meta-yocto \
  /home/aalonso/workspace/fsl/poky/meta-ivi \
  /home/aalonso/workspace/fsl/poky/meta-fsl-arm \
  /home/aalonso/workspace/fsl/poky/meta-fsl-ivi \
  "

And I'm building the gemini-image

bitbake gemini-image

Your issue seems that you are mixing layers that are compatible with meta-ivi

Looks that the rigth thing to do is to create a similar repo like
https://github.com/Freescale/fsl-community-bsp-platform
so any one can recrate the project components needed a easily replicate the setup


Regards
Adrian




On Tue, Oct 29, 2013 at 11:46 PM, Krishna <krishnaks at iwavesystems.com> wrote:

  Hi Adrian,

  I have followed the instructions in the read me file.

  But the problem I faced is I was getting build error as libXfont not found which error will go only after adding X11 in DISTRO features. Is that my mistake?

  Regards,
  Krishna


  From: Adrian Alonso 
  Sent: Wednesday, October 30, 2013 10:41 AM
  To: Krishna 
  Cc: meta-freescale at yoctoproject.org 
  Subject: Re: [meta-freescale] meta-fsl-ivi installation

  Hi Krishna, 


  As the instructions from the README file


  You need to set


DISTRO ?= "fsl-ivi-vfb"
This overrides any dependency on X11 and uses MXGAL as graphic backendThe MXGAL graphics backend for the Genivi LayerManager enables the
composition tasks of LayerManager to be accelerated using the 2D
raster GPU present on the Freescale i.MX6 processors.And as per meta-ivi instructionshttp://git.yoctoproject.org/cgit/cgit.cgi/meta-ivi/tree/README.md?h=5.0

you should be using poky instead of oe-core + meta-openembedded as can lead to "bb" recipes integration issues

as you are experiencing.Regards

Adrian


  On Mon, Oct 28, 2013 at 2:39 AM, Krishna <krishnaks at iwavesystems.com> wrote:

    Hi,

    Anyone tried with IVI layer added image/foton image? 
    For me on display nothing is coming and debug logs also stopping after  "turn off boot console ttymxc3".
    I have enabled X11 to solve build errors.

    Thanks in advance


    From: Krishna 
    Sent: Friday, October 25, 2013 4:03 PM
    To: meta-freescale at yoctoproject.org 
    Subject: Re: [meta-freescale] meta-fsl-ivi installation

    Hi, 

    With X11 enabled, we are able to build foton image. But on display nothing is coming and 
    Debug logs are stopping at 

    "turn off boot console ttymxc3"

    After that no print is coming.

    Regards,
    Krishna
    -----Original Message----- 
    From: Erik Botö 
    Sent: Thursday, October 24, 2013 4:37 PM 
    To: Krishna 
    Cc: meta-freescale at yoctoproject.org 
    Subject: Re: [meta-freescale] meta-fsl-ivi installation 

    Hi,

    On Thu, Oct 24, 2013 at 11:37 AM, Krishna <krishnaks at iwavesystems.com> wrote:
    > Hi Eric,
    >
    > Where Exactly this libXfont should be there?

    I'm not using the layers you are, so I cannot answer all your
    questions. I just tried to give you some hints.

    The recipe for libxfont should be in
    poky/meta/recipes-graphics/xorg-lib/. I looked in the dylan-branch [1]
    of poky and it's there so if you don't have that file you must have
    the wrong thing checked out. It's also there in newer versions of
    poky.

    [1] - http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-graphics/xorg-lib/libxfont_1.4.5.bb?h=dylan

    Cheers,
    Erik

    _______________________________________________
    meta-freescale mailing list
    meta-freescale at yoctoproject.org
    https://lists.yoctoproject.org/listinfo/meta-freescale






  -- 
  Saludos
  Adrian Alonso
  http://aalonso.wordpress.com





-- 
Saludos
Adrian Alonso
http://aalonso.wordpress.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131031/63f4063b/attachment.html>


More information about the meta-freescale mailing list