[meta-freescale] Error testing 3.10.9-1.0.0-alpha kernel [was Re: Request to integrate freescale i.mx 3.10.9-1.0.0 alpha release into dora branch of meta-fsl-arm]

[Daiane Angolini]

On 10/30/2013 06:21 AM, Gonzalez, Alex wrote:
> Sure, I will give the patch a try and report back.
>
> Daiane, could you check your kernel log for the GPU driver probe message?
>
> Galcore version 4.6.9.6622

from dmesg


mmcblk1rpmb: mmc2:0001 SEM08G partition 3 128 KiB
  mmcblk1: unknown partition table
  mmcblk1boot1: unknown partition table
  mmcblk1boot0: unknown partition table
Galcore version 4.6.9.6622
mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
mxc_asrc 2034000.asrc: mxc_asrc registered.
mxc_vpu 2040000.vpu: VPU initialized


I don't see any error. Is that enough?


Daiane

>
> I just want to make sure the driver was loaded. On my boards the driver always crashes.
>
> Alex
>
> -----Original Message-----
> From: otavio.salvador at gmail.com [mailto:otavio.salvador at gmail.com] On Behalf Of Otavio Salvador
> Sent: martes, 29 de octubre de 2013 19:47
> To: Daiane Angolini
> Cc: Gonzalez, Alex; meta-freescale at yoctoproject.org; Post Lauren-RAA013
> Subject: Re: [meta-freescale] Error testing 3.10.9-1.0.0-alpha kernel [was Re: Request to integrate freescale i.mx 3.10.9-1.0.0 alpha release into dora branch of meta-fsl-arm]
>
> On Tue, Oct 29, 2013 at 4:36 PM, Daiane Angolini
> <daiane.angolini at freescale.com> wrote:
>> On 10/29/2013 04:34 PM, Otavio Salvador wrote:
>>>
>>> On Tue, Oct 29, 2013 at 4:22 PM, Daiane Angolini
>>> <daiane.angolini at freescale.com> wrote:
>>>>
>>>> On 10/29/2013 01:35 PM, Gonzalez, Alex wrote:
>>>>>
>>>>>
>>>>> Actually, your crash is earlier still. Try using the 2013.04 u-boot. I
>>>>> couldn't make it boot either with 2013.10.
>>>>
>>>>
>>>>
>>>> And now it's fixed. Otavio will send the patch!
>>>>
>>>>
>>>> U-Boot 2013.10-00005-g4b2e99f-dirty (Oct 29 2013 - 14:56:40)
>>>>
>>>> CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
>>>>
>>>> Reset cause: POR
>>>> Board: MX6-SabreSD
>>>> DRAM:  1 GiB
>>>> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
>>>> *** Warning - bad CRC, using default environment
>>>>
>>>>
>>>> Stopping Bootlog daemon: bootlogd.
>>>>
>>>> Poky (Yocto Project Reference Distro) 1.5+snapshot-20131029 imx6qsabresd
>>>> /dev/ttymxc0
>>>>
>>>> imx6qsabresd login: root
>>>> root at imx6qsabresd:~# ls
>>>> root at imx6qsabresd:~# uname -a
>>>> Linux imx6qsabresd 3.10.9-1.0.0_alpha+gdbf364b #1 SMP Tue Oct 29 12:38:48
>>>> BRST 2013 armv7l GNU/Linux
>>>> root at imx6qsabresd:~#
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Alex, how can I reproduce your error?
>>>
>>>
>>> Can you try the patch?
>>>
>>
>> Sure, but maybe I don't have time to send you a reply today.
>
> My goal was that Alex could try it :-) Alex?
>


-- 
Daiane