[meta-freescale] [meta-fsl-arm][PATCH 24/25] imx6slevk.conf: Add ldo device tree

[Otavio Salvador]

From: Lauren Post <lauren.post at freescale.com>

ENGR00277895: dts: ARM: imx6: add ldo-enable dts files

  Currently, we use different dts files to support ldo-bypass or ldo-enable, then
we need add both dts files for the boards which can support ldo-bypass mode(all
boards support ldo-enable at least). So for below boards we need add ldo-enable
dts file so that we can use this to easily support ldo-enable mode:
  1)mx6q-sabresd board:  ldo-bypass dts->mx6q-sabresd.dtb,
                         ldo-enable dts->mx6q-sabresd-ldo.dtb
  2)mx6q-sabresd board:  ldo-bypass dts->mx6dl-sabresd.dtb,
                 ldo-enable dts->mx6dl-sabresd-ldo.dtb
  3)mx6sl-evk board:     ldo-bypass dts->mx6sl-evk.dtb,
                 ldo-enable dts->mx6sl-evk-ldo.dtb

Change-Id: I997bf896a3d3fde482fe9c120a92c16d49817adb
Signed-off-by: Lauren Post <lauren.post at freescale.com>
---
 conf/machine/imx6slevk.conf | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
index da16c1d..990f48a 100644
--- a/conf/machine/imx6slevk.conf
+++ b/conf/machine/imx6slevk.conf
@@ -8,6 +8,8 @@ include conf/machine/include/tune-cortexa9.inc
 
 SOC_FAMILY = "mx6:mx6sl"
 
+KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-ldo.dtb"
+
 UBOOT_MACHINE = "mx6slevk_config"
 
 SERIAL_CONSOLE = "115200 ttymxc0"
-- 
1.8.4.rc3