[meta-freescale] IMX53QSB-R can not boot from microSD

[Fabio Estevam]

On Thu, Oct 24, 2013 at 2:46 AM, jojo <rjiejie at gmail.com> wrote:
> Hi,
> This board is supported by yocto project ?
>
> i use the command "sudo dd
> if=fsl-image-gui-imx53qsb-20131024020930.rootfs.sdcard of=/dev/sdb bs=1M" to
> put image in to microSD, and
>
> i use the command "MACHINE=imx53qsb source setup-environment build-imx53qsb"
>
> to create the fsl-image-gui to boot, some error is reported as bellow :
>
> In:    serial
> Out:   serial
> Err:   serial
> CPU:   Freescale i.MX53 family rev2.1 at 1000 MHz
> Reset cause: POR
> Net:   FEC
> Warning: failed to set MAC address
>
> Hit any key to stop autoboot:  0
> MMC: no card present
> mmc0(part 0) is current device
> MMC: no card present

I would suggest you to debug why you get 'MMC: no card present'.

Regards,

Fabio Estevam