[meta-freescale] Linux imx6qsabresd 3.0.35-1.1.0+yocto+g21304e1 networking problem

[Daiane Angolini]

On 10/17/2013 08:26 AM, Aleksandr wrote:
>
>> I almost remember I faced several networking problems on 1.1.0 release, but
> it was on sabre lite board (not sabre sd). And I cannot remember if it was due
> to kernel or hardware or my local network
>>
>> Would you be able to use dora instead? It's 3.0.35-4.1.0 kernel
>
> Thank you for reply, Daiane. I am using "L3.0.35_4.1.0_130816_images_MX6" now.
> I also used "oneiric.tgz" whith contain Ubuntu linaro filesystem. In both of
> them i get same issue. I mean same error messages and not working network.
> But with linaro ubuntu network were working a few minutes. But then it stoped
> working again.
> Regards.

What else should I test?

I got no error with:

517 packets transmitted, 517 packets received, 0% packet loss
round-trip min/avg/max = 0.177/0.264/0.841 ms
root at imx6qsabresd:~# udhcpc -i eth0
udhcpc (v1.21.1) started
Sending discover...
Sending select for 10.29.244.99...
Lease of 10.29.244.99 obtained, lease time 86400
/etc/udhcpc.d/50default: Adding DNS 10.208.0.3
/etc/udhcpc.d/50default: Adding DNS 10.64.32.3


I got an ip from dhpc server, and I ping'ed my PC.

I'm using dora, imx6qsabresd 3.0.35-4.1.0+yocto+gbdde708
booting from sdcard

ethernet from J7


So far, I was not able to reproduce your error. Do you see anything on 
my environment that is different from yours?


>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>


-- 
Daiane